On Mon, 16 Jun 2014, Boris BREZILLON wrote: > On 16/06/2014 14:50, Lee Jones wrote: > >> The HLCDC IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5 > >> family or sama5d3 family) exposes 2 subdevices: > >> - a display controller (controlled by a DRM driver) > >> - a PWM chip > >> > >> Add support for the MFD device which will just retrieve HLCDC clocks and > >> create a regmap so that subdevices can access the HLCDC register range > >> concurrently. > >> > >> Signed-off-by: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx> > >> --- > >> .../devicetree/bindings/mfd/atmel-hlcdc.txt | 41 ++++++++ > >> drivers/mfd/Kconfig | 11 ++ > >> drivers/mfd/Makefile | 1 + > >> drivers/mfd/atmel-hlcdc.c | 116 +++++++++++++++++++++ > >> include/linux/mfd/atmel-hlcdc.h | 78 ++++++++++++++ > >> 5 files changed, 247 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt > >> create mode 100644 drivers/mfd/atmel-hlcdc.c > >> create mode 100644 include/linux/mfd/atmel-hlcdc.h > >> diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt > >> new file mode 100644 > >> index 0000000..f5b69cb > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt [...] > >> + hlcdc-display-controller { > >> + compatible = "atmel,hlcdc-dc"; > >> + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; > > I assume you're using the 3rd parameter for flags. If so, please use > > the defines. > > No, the third parameter encodes the irq priority (from 0 to 7 IIRC). Ah okay. Can you point me to the documentation for this IRQ controller please? I'd like to have a quick peek. It might be worth defining the priority to prevent confusion, also you definitely should document it in your binding. [...] > >> +static struct platform_driver atmel_hlcdc_driver = { > >> + .probe = atmel_hlcdc_probe, > >> + .remove = atmel_hlcdc_remove, > >> + .driver = { > >> + .name = "atmel-hlcdc", > >> + .owner = THIS_MODULE, > >> + .of_match_table = atmel_hlcdc_match, > > Is this driver DT only? > > Yes it is. So it should depend on OF in the Kconfig entry. -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel