Re: [PATCH 2/5] drm/i915: preserve swizzle settings if necessary v3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 05, 2014 at 11:24:28AM -0700, Jesse Barnes wrote:
> Some machines (like MBAs) might use a tiled framebuffer but not enable
> display swizzling at boot time.  We want to preserve that configuration
> if possible to prevent a boot time mode set.  On IVB+ it shouldn't
> affect performance anyway since the memory controller does internal
> swizzling anyway.
> 
> For most other configs we'll be able to enable swizzling at boot time,
> since the initial framebuffer won't be tiled, thus we won't see any
> corruption when we enable it.
> 
> v2: preserve swizzling if BIOS had it set (Daniel)
> v3: preserve swizzling only if we inherited a tiled framebuffer (Daniel)
>     check display swizzle setting in detect_bit_6_swizzle (Daniel)
>     use gen6 as cutoff point (Daniel)
> 
> Reported-by: Kristian Høgsberg <hoegsberg@xxxxxxxxx>
> Signed-off-by: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/i915_drv.h        |  1 +
>  drivers/gpu/drm/i915/i915_gem.c        |  3 +++
>  drivers/gpu/drm/i915/i915_gem_tiling.c | 38 +++++++++++++++++++---------------
>  drivers/gpu/drm/i915/intel_display.c   |  3 +++
>  4 files changed, 28 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index f57b752..f49fdcb 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1405,6 +1405,7 @@ struct drm_i915_private {
>  	struct intel_vbt_data vbt;
>  
>  	bool bios_ssc; /* BIOS had SSC enabled at boot? */
> +	bool preserve_bios_swizzle;
>  
>  	/* overlay */
>  	struct intel_overlay *overlay;
> diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
> index bfc7af0..0b168fb 100644
> --- a/drivers/gpu/drm/i915/i915_gem.c
> +++ b/drivers/gpu/drm/i915/i915_gem.c
> @@ -4580,6 +4580,9 @@ void i915_gem_init_swizzling(struct drm_device *dev)
>  	    dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_NONE)
>  		return;
>  
> +	if (INTEL_INFO(dev)->gen >= 6 && dev_priv->preserve_bios_swizzle)
> +		return;
> +

Above two hunks shouldnt be needed if the setup in
i915_gem_detect_bit_6_swizzle works correctly.

>  	I915_WRITE(DISP_ARB_CTL, I915_READ(DISP_ARB_CTL) |
>  				 DISP_TILE_SURFACE_SWIZZLING);
>  
> diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
> index cb150e8..73005ad 100644
> --- a/drivers/gpu/drm/i915/i915_gem_tiling.c
> +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
> @@ -91,26 +91,30 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
>  	uint32_t swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
>  	uint32_t swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
>  
> -	if (IS_VALLEYVIEW(dev)) {
> -		swizzle_x = I915_BIT_6_SWIZZLE_NONE;
> -		swizzle_y = I915_BIT_6_SWIZZLE_NONE;
> -	} else if (INTEL_INFO(dev)->gen >= 6) {
> +	if (INTEL_INFO(dev)->gen >= 6) {
>  		uint32_t dimm_c0, dimm_c1;
> -		dimm_c0 = I915_READ(MAD_DIMM_C0);
> -		dimm_c1 = I915_READ(MAD_DIMM_C1);
> -		dimm_c0 &= MAD_DIMM_A_SIZE_MASK | MAD_DIMM_B_SIZE_MASK;
> -		dimm_c1 &= MAD_DIMM_A_SIZE_MASK | MAD_DIMM_B_SIZE_MASK;
> -		/* Enable swizzling when the channels are populated with
> -		 * identically sized dimms. We don't need to check the 3rd
> -		 * channel because no cpu with gpu attached ships in that
> -		 * configuration. Also, swizzling only makes sense for 2
> -		 * channels anyway. */
> -		if (dimm_c0 == dimm_c1) {
> -			swizzle_x = I915_BIT_6_SWIZZLE_9_10;
> -			swizzle_y = I915_BIT_6_SWIZZLE_9;
> -		} else {
> +
> +		/* Make sure to honor boot time display configuration */
> +		if (!(I915_READ(DISP_ARB_CTL) & DISP_TILE_SURFACE_SWIZZLING)) {

Not quite what I had in mind. Imo we need to check for whether any
inherited fbs are tiled and if so also inherit the swizzle setting
unconditionally, whether it is swizzled or unswizzled. See

http://patchwork.freedesktop.org/patch/22204/

Cheers, Daniel

>  			swizzle_x = I915_BIT_6_SWIZZLE_NONE;
>  			swizzle_y = I915_BIT_6_SWIZZLE_NONE;
> +		} else {
> +			dimm_c0 = I915_READ(MAD_DIMM_C0);
> +			dimm_c1 = I915_READ(MAD_DIMM_C1);
> +			dimm_c0 &= MAD_DIMM_A_SIZE_MASK | MAD_DIMM_B_SIZE_MASK;
> +			dimm_c1 &= MAD_DIMM_A_SIZE_MASK | MAD_DIMM_B_SIZE_MASK;
> +			/* Enable swizzling when the channels are populated with
> +			 * identically sized dimms. We don't need to check the
> +			 * 3rd channel because no cpu with gpu attached ships
> +			 * in that configuration. Also, swizzling only makes
> +			 * sense for 2 channels anyway. */
> +			if (dimm_c0 == dimm_c1) {
> +				swizzle_x = I915_BIT_6_SWIZZLE_9_10;
> +				swizzle_y = I915_BIT_6_SWIZZLE_9;
> +			} else {
> +				swizzle_x = I915_BIT_6_SWIZZLE_NONE;
> +				swizzle_y = I915_BIT_6_SWIZZLE_NONE;
> +			}
>  		}
>  	} else if (IS_GEN5(dev)) {
>  		/* On Ironlake whatever DRAM config, GPU always do
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 0e8c9bc..7dbbef7 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -2361,6 +2361,7 @@ static void intel_find_plane_obj(struct intel_crtc *intel_crtc,
>  				 struct intel_plane_config *plane_config)
>  {
>  	struct drm_device *dev = intel_crtc->base.dev;
> +	struct drm_i915_private *dev_priv = dev->dev_private;
>  	struct drm_crtc *c;
>  	struct intel_crtc *i;
>  	struct intel_framebuffer *fb;
> @@ -2389,6 +2390,8 @@ static void intel_find_plane_obj(struct intel_crtc *intel_crtc,
>  
>  		fb = to_intel_framebuffer(c->primary->fb);
>  		if (i915_gem_obj_ggtt_offset(fb->obj) == plane_config->base) {
> +			if (fb->obj->tiling_mode != I915_TILING_NONE)
> +				dev_priv->preserve_bios_swizzle = true;
>  			drm_framebuffer_reference(c->primary->fb);
>  			intel_crtc->base.primary->fb = c->primary->fb;
>  			break;
> -- 
> 1.8.3.2
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux