Thanks to advanced RE of fglrx we finally know what exactly needs to be handled of AFMT change. This has been tested for possible regressions on: 1) DCE2 HD2400 (RV610) 2) DCE3 HD3470 (RV620) For a reference and details see: https://bugzilla.kernel.org/show_bug.cgi?id=76231 Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx> --- V2: Move r600d.h changes to 0003 (from 0004) to don't break compilation Fix typo in commit message --- drivers/gpu/drm/radeon/r600_hdmi.c | 82 ++++++++++---------------------------- 1 file changed, 22 insertions(+), 60 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index a90914f..26ef8ce 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -442,14 +442,16 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod WREG32(HDMI0_RAMP_CONTROL2 + offset, 0x00000001); WREG32(HDMI0_RAMP_CONTROL3 + offset, 0x00000001); - r600_hdmi_audio_workaround(encoder); - /* enable audio after to setting up hw */ r600_audio_enable(rdev, dig->afmt->pin, true); } -/* - * update settings with current parameters from audio engine +/** + * r600_hdmi_update_audio_settings - Update audio infoframe + * + * @encoder: drm encoder + * + * Gets info about current audio stream and updates audio infoframe. */ void r600_hdmi_update_audio_settings(struct drm_encoder *encoder) { @@ -461,7 +463,7 @@ void r600_hdmi_update_audio_settings(struct drm_encoder *encoder) uint8_t buffer[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AUDIO_INFOFRAME_SIZE]; struct hdmi_audio_infoframe frame; uint32_t offset; - uint32_t iec; + uint32_t value; ssize_t err; if (!dig->afmt || !dig->afmt->enabled) @@ -474,60 +476,6 @@ void r600_hdmi_update_audio_settings(struct drm_encoder *encoder) DRM_DEBUG("0x%02X IEC60958 status bits and 0x%02X category code\n", (int)audio.status_bits, (int)audio.category_code); - iec = 0; - if (audio.status_bits & AUDIO_STATUS_PROFESSIONAL) - iec |= 1 << 0; - if (audio.status_bits & AUDIO_STATUS_NONAUDIO) - iec |= 1 << 1; - if (audio.status_bits & AUDIO_STATUS_COPYRIGHT) - iec |= 1 << 2; - if (audio.status_bits & AUDIO_STATUS_EMPHASIS) - iec |= 1 << 3; - - iec |= HDMI0_60958_CS_CATEGORY_CODE(audio.category_code); - - switch (audio.rate) { - case 32000: - iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0x3); - break; - case 44100: - iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0x0); - break; - case 48000: - iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0x2); - break; - case 88200: - iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0x8); - break; - case 96000: - iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0xa); - break; - case 176400: - iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0xc); - break; - case 192000: - iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0xe); - break; - } - - WREG32(HDMI0_60958_0 + offset, iec); - - iec = 0; - switch (audio.bits_per_sample) { - case 16: - iec |= HDMI0_60958_CS_WORD_LENGTH(0x2); - break; - case 20: - iec |= HDMI0_60958_CS_WORD_LENGTH(0x3); - break; - case 24: - iec |= HDMI0_60958_CS_WORD_LENGTH(0xb); - break; - } - if (audio.status_bits & AUDIO_STATUS_V) - iec |= 0x5 << 16; - WREG32_P(HDMI0_60958_1 + offset, iec, ~0x5000f); - err = hdmi_audio_infoframe_init(&frame); if (err < 0) { DRM_ERROR("failed to setup audio infoframe\n"); @@ -542,8 +490,22 @@ void r600_hdmi_update_audio_settings(struct drm_encoder *encoder) return; } + value = RREG32(HDMI0_AUDIO_PACKET_CONTROL + offset); + if (value & HDMI0_AUDIO_TEST_EN) + WREG32(HDMI0_AUDIO_PACKET_CONTROL + offset, + value & ~HDMI0_AUDIO_TEST_EN); + + WREG32_OR(HDMI0_CONTROL + offset, + HDMI0_ERROR_ACK); + + WREG32_AND(HDMI0_INFOFRAME_CONTROL0 + offset, + ~HDMI0_AUDIO_INFO_SOURCE); + r600_hdmi_update_audio_infoframe(encoder, buffer, sizeof(buffer)); - r600_hdmi_audio_workaround(encoder); + + WREG32_OR(HDMI0_INFOFRAME_CONTROL0 + offset, + HDMI0_AUDIO_INFO_CONT | + HDMI0_AUDIO_INFO_UPDATE); } /* -- 1.8.4.5 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
