Re: [PATCH 11/12] drm/i915: Accurately initialize fifo underrun state on gmch platforms

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2014-05-14 at 20:51 +0200, Daniel Vetter wrote:
> We don't have hardware based disable bits on gmch platforms, so need
> to block spurious underrun reports in software. Which means that we
> _must_ start out with fifo underrun reporting disabled everywhere.
> 
> This is in big contrast to ilk/hsw/cpt where there's only _one_
> disable bit for all platforms and hence we must allow underrun
> reporting on disabled pipes. Otherwise nothing really works,
> especially the CRC support since that's key'ed off the same irq
> disable bit.
> 
> This allows us to ditch the fifo underrun reporting hack from the vlv
> runtime pm code and unexport the internal function from i915_irq.c
> again. Yay!
> 
> v2: Keep the display irq disabling, spotted by Imre.
> 
> Cc: Imre Deak <imre.deak@xxxxxxxxx>
> Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
> ---
>  drivers/gpu/drm/i915/i915_irq.c      | 4 ++--
>  drivers/gpu/drm/i915/intel_display.c | 9 ++++++++-
>  drivers/gpu/drm/i915/intel_drv.h     | 2 --
>  drivers/gpu/drm/i915/intel_pm.c      | 6 ------
>  4 files changed, 10 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index afa55199b829..a502faae0d0b 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -415,8 +415,8 @@ static void cpt_set_fifo_underrun_reporting(struct drm_device *dev,
>   *
>   * Returns the previous state of underrun reporting.
>   */
> -bool __intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
> -					     enum pipe pipe, bool enable)
> +static bool __intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
> +						    enum pipe pipe, bool enable)
>  {
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index d4abaa4bf2f4..e78003ac71a0 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -11510,11 +11510,18 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
>  			encoder->base.crtc = NULL;
>  		}
>  	}
> -	if (crtc->active) {
> +
> +	if (crtc->active || IS_VALLEYVIEW(dev) || INTEL_INFO(dev)->gen < 5) {
>  		/*
>  		 * We start out with underrun reporting disabled to avoid races.
>  		 * For correct bookkeeping mark this on active crtcs.
>  		 *
> +		 * Also on gmch platforms we dont have any hardware bits to
> +		 * disable the underrun reporting. Which means we need to start
> +		 * out with underrun reporting disabled also on inactive pipes,
> +		 * since otherwise we'll complain about the garbage we read when
> +		 * e.g. coming up after runtime pm.
> +		 *
>  		 * No protection against concurrent access is required - at
>  		 * worst a fifo underrun happens which also sets this to false.
>  		 */
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index b885df150910..d3fa5e0a13bd 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -642,8 +642,6 @@ hdmi_to_dig_port(struct intel_hdmi *intel_hdmi)
>  /* i915_irq.c */
>  bool intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
>  					   enum pipe pipe, bool enable);
> -bool __intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
> -					     enum pipe pipe, bool enable);
>  bool intel_set_pch_fifo_underrun_reporting(struct drm_device *dev,
>  					   enum transcoder pch_transcoder,
>  					   bool enable);
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 45fa43f16bb3..08d5d4c16fdf 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -5605,15 +5605,9 @@ static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv,
>  static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv,
>  					   struct i915_power_well *power_well)
>  {
> -	struct drm_device *dev = dev_priv->dev;
> -	enum pipe pipe;
> -
>  	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D);
>  
>  	spin_lock_irq(&dev_priv->irq_lock);
> -	for_each_pipe(pipe)
> -		__intel_set_cpu_fifo_underrun_reporting(dev, pipe, false);
> -

As we discussed on IRC, something like the following could be added to
the commit log:

Originally the purpose of disabling the reporting on vlv was to prevent
spurious underflow reports when the power well is turned off and the
pipestat register containing the underflow flag will read 0xffffffff.
After the change in intel_sanitize_crtc() to disable the reporting for
all pipes initially, it's guaranteed that reporting is disabled for all
pipes by the time we call vlv_display_power_well_disable(), so there is
no need to disable it there explicitly.

Reviewed-by: Imre Deak <imre.deak@xxxxxxxxx> 


>  	valleyview_disable_display_irqs(dev_priv);
>  	spin_unlock_irq(&dev_priv->irq_lock);
>  


_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux