- Integrate into the drm DocBook
- Disable kerneldoc for functions not exported to drivers.
- Properly document the new drm_vblank_on|off and add cautious
comments explaining when drm_vblank_pre|post_modesets shouldn't be
used.
- General polish and OCD.
Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
---
Documentation/DocBook/drm.tmpl | 5 +-
drivers/gpu/drm/drm_irq.c | 181 ++++++++++++++++++++++++++++-------------
2 files changed, 129 insertions(+), 57 deletions(-)
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index e37a77a72b8b..70ef87bcea04 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -2519,6 +2519,10 @@ void (*disable_vblank) (struct drm_device *dev, int crtc);</synopsis>
with a call to <function>drm_vblank_cleanup</function> in the driver
<methodname>unload</methodname> operation handler.
</para>
+ <sect2>
+ <title>Vertical Blanking and Interrupt Handling Functions Reference</title>
+!Edrivers/gpu/drm/drm_irq.c
+ </sect2>
</sect1>
<!-- Internals: open/close, file operations and ioctls -->
@@ -2870,7 +2874,6 @@ int num_ioctls;</synopsis>
</listitem>
</varlistentry>
</variablelist>
-<!--!Edrivers/char/drm/drm_irq.c-->
</para>
</sect1>
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index dd786d84daab..5ff986bd4de4 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -1,6 +1,5 @@
-/**
- * \file drm_irq.c
- * IRQ support
+/*
+ * drm_irq.c IRQ and vblank support
*
* \author Rickard E. (Rik) Faith <faith@xxxxxxxxxxx>
* \author Gareth Hughes <gareth@xxxxxxxxxxx>
@@ -156,6 +155,12 @@ static void vblank_disable_fn(unsigned long arg)
spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
}
+/**
+ * drm_vblank_cleanup - cleanup vblank support
+ * @dev: drm device
+ *
+ * This function cleans up any resources allocated in drm_vblank_init.
+ */
void drm_vblank_cleanup(struct drm_device *dev)
{
int crtc;
@@ -175,6 +180,16 @@ void drm_vblank_cleanup(struct drm_device *dev)
}
EXPORT_SYMBOL(drm_vblank_cleanup);
+/**
+ * drm_vblank_init - initialize vblank support
+ * @dev: drm_device
+ * @num_crtcs: number of crtcs supported by @dev
+ *
+ * This function initializes vblank support for @num_crtcs display pipelines.
+ *
+ * Returns:
+ * Zero on success or a negative error code on failure.
+ */
int drm_vblank_init(struct drm_device *dev, int num_crtcs)
{
int i, ret = -ENOMEM;
@@ -238,13 +253,21 @@ static void drm_irq_vgaarb_nokms(void *cookie, bool state)
}
/**
- * Install IRQ handler.
- *
- * \param dev DRM device.
+ * drm_irq_install - install IRQ handler
+ * @dev: drm device
+ * @irq: irq number to install the handler for
*
* Initializes the IRQ related data. Installs the handler, calling the driver
- * \c irq_preinstall() and \c irq_postinstall() functions
- * before and after the installation.
+ * irq_preinstall() and irq_postinstall() functions before and after the
+ * installation.
+ *
+ * This is the simplified helper interface provided for drivers with no special
+ * needs. Drivers which need to install interrupt handlers for multiple
+ * interrupts must instead set drm_device->irq_enabled to signal the drm core
+ * that vblank interrupts are available.
+ *
+ * Returns:
+ * Zero on success or a negative error code on failure.
*/
int drm_irq_install(struct drm_device *dev, int irq)
{
@@ -304,11 +327,20 @@ int drm_irq_install(struct drm_device *dev, int irq)
EXPORT_SYMBOL(drm_irq_install);
/**
- * Uninstall the IRQ handler.
+ * drm_irq_uninstall - uninstall the IRQ handler
+ * @dev: drm device
+ *
+ * Calls the driver's irq_uninstall() function and unregisters the irq handler.
+ * This should only be called by drivers which used drm_irq_install() to set up
+ * their interrupt handler. Other drivers must only reset
+ * drm_device->irq_enabled to false.
*
- * \param dev DRM device.
+ * Note that for kernel modesetting drivers it is a bug if this function fails.
+ * The sanity checks are only to catch buggy user modesetting drivers which call
+ * the same function through an ioctl.
*
- * Calls the driver's \c irq_uninstall() function, and stops the irq.
+ * Returns:
+ * Zero on success or a negative error code on failure.
*/
int drm_irq_uninstall(struct drm_device *dev)
{
@@ -353,7 +385,7 @@ int drm_irq_uninstall(struct drm_device *dev)
}
EXPORT_SYMBOL(drm_irq_uninstall);
-/**
+/*
* IRQ control ioctl.
*
* \param inode device inode.
@@ -406,10 +438,9 @@ int drm_control(struct drm_device *dev, void *data,
}
/**
- * drm_calc_timestamping_constants - Calculate vblank timestamp constants
- *
- * @crtc drm_crtc whose timestamp constants should be updated.
- * @mode display mode containing the scanout timings
+ * drm_calc_timestamping_constants - calculate vblank timestamp constants
+ * @crtc: drm_crtc whose timestamp constants should be updated.
+ * @mode: display mode containing the scanout timings
*
* Calculate and store various constants which are later
* needed by vblank and swap-completion timestamping, e.g,
@@ -459,11 +490,22 @@ void drm_calc_timestamping_constants(struct drm_crtc *crtc,
EXPORT_SYMBOL(drm_calc_timestamping_constants);
/**
- * drm_calc_vbltimestamp_from_scanoutpos - helper routine for kms
- * drivers. Implements calculation of exact vblank timestamps from
- * given drm_display_mode timings and current video scanout position
- * of a crtc. This can be called from within get_vblank_timestamp()
- * implementation of a kms driver to implement the actual timestamping.
+ * drm_calc_vbltimestamp_from_scanoutpos - precise vblank timestamp helper
+ * @dev: drm device
+ * @crtc: Which crtc's vblank timestamp to retrieve
+ * @max_error: Desired maximum allowable error in timestamps (nanosecs)
+ * On return contains true maximum error of timestamp
+ * @vblank_time: Pointer to struct timeval which should receive the timestamp
+ * @flags: Flags to pass to driver:
+ * 0 = Default,
+ * DRM_CALLED_FROM_VBLIRQ = If function is called from vbl irq handler
+ * @refcrtc: drm_crtc* of crtc which defines scanout timing
+ * @mode: mode which defines the scanout timings
+ *
+ * Implements calculation of exact vblank timestamps from given drm_display_mode
+ * timings and current video scanout position of a crtc. This can be called from
+ * within get_vblank_timestamp() implementation of a kms driver to implement the
+ * actual timestamping.
*
* Should return timestamps conforming to the OML_sync_control OpenML
* extension specification. The timestamp corresponds to the end of
@@ -478,18 +520,8 @@ EXPORT_SYMBOL(drm_calc_timestamping_constants);
* returns as no operation if a doublescan or interlaced video mode is
* active. Higher level code is expected to handle this.
*
- * @dev: DRM device.
- * @crtc: Which crtc's vblank timestamp to retrieve.
- * @max_error: Desired maximum allowable error in timestamps (nanosecs).
- * On return contains true maximum error of timestamp.
- * @vblank_time: Pointer to struct timeval which should receive the timestamp.
- * @flags: Flags to pass to driver:
- * 0 = Default.
- * DRM_CALLED_FROM_VBLIRQ = If function is called from vbl irq handler.
- * @refcrtc: drm_crtc* of crtc which defines scanout timing.
- * @mode: mode which defines the scanout timings
- *
- * Returns negative value on error, failure or if not supported in current
+ * Returns:
+ * Negative value on error, failure or if not supported in current
* video mode:
*
* -EINVAL - Invalid crtc.
@@ -641,14 +673,13 @@ static struct timeval get_drm_timestamp(void)
/**
* drm_get_last_vbltimestamp - retrieve raw timestamp for the most recent
- * vblank interval.
- *
- * @dev: DRM device
+ * vblank interval
+ * @dev: drm device
* @crtc: which crtc's vblank timestamp to retrieve
* @tvblank: Pointer to target struct timeval which should receive the timestamp
* @flags: Flags to pass to driver:
- * 0 = Default.
- * DRM_CALLED_FROM_VBLIRQ = If function is called from vbl irq handler.
+ * 0 = Default,
+ * DRM_CALLED_FROM_VBLIRQ = If function is called from vbl irq handler
*
* Fetches the system timestamp corresponding to the time of the most recent
* vblank interval on specified crtc. May call into kms-driver to
@@ -657,7 +688,8 @@ static struct timeval get_drm_timestamp(void)
* Returns zero if timestamp originates from uncorrected do_gettimeofday()
* call, i.e., it isn't very precisely locked to the true vblank.
*
- * Returns non-zero if timestamp is considered to be very precise.
+ * Returns:
+ * Non-zero if timestamp is considered to be very precise, zero otherwise.
*/
u32 drm_get_last_vbltimestamp(struct drm_device *dev, int crtc,
struct timeval *tvblank, unsigned flags)
@@ -686,12 +718,15 @@ EXPORT_SYMBOL(drm_get_last_vbltimestamp);
/**
* drm_vblank_count - retrieve "cooked" vblank counter value
- * @dev: DRM device
+ * @dev: drm device
* @crtc: which counter to retrieve
*
* Fetches the "cooked" vblank count value that represents the number of
* vblank events since the system was booted, including lost events due to
* modesetting activity.
+ *
+ * Returns:
+ * The software vblank counter.
*/
u32 drm_vblank_count(struct drm_device *dev, int crtc)
{
@@ -703,15 +738,14 @@ EXPORT_SYMBOL(drm_vblank_count);
* drm_vblank_count_and_time - retrieve "cooked" vblank counter value
* and the system timestamp corresponding to that vblank counter value.
*
- * @dev: DRM device
+ * @dev: drm device
* @crtc: which counter to retrieve
* @vblanktime: Pointer to struct timeval to receive the vblank timestamp.
*
* Fetches the "cooked" vblank count value that represents the number of
* vblank events since the system was booted, including lost events due to
* modesetting activity. Returns corresponding system timestamp of the time
- * of the vblank interval that corresponds to the current value vblank counter
- * value.
+ * of the vblank interval that corresponds to the current vblank counter value.
*/
u32 drm_vblank_count_and_time(struct drm_device *dev, int crtc,
struct timeval *vblanktime)
@@ -751,7 +785,7 @@ static void send_vblank_event(struct drm_device *dev,
/**
* drm_send_vblank_event - helper to send vblank event after pageflip
- * @dev: DRM device
+ * @dev: drm device
* @crtc: CRTC in question
* @e: the event to send
*
@@ -777,7 +811,7 @@ EXPORT_SYMBOL(drm_send_vblank_event);
/**
* drm_update_vblank_count - update the master vblank counter
- * @dev: DRM device
+ * @dev: drm device
* @crtc: counter to update
*
* Call back into the driver to update the appropriate vblank counter
@@ -841,7 +875,7 @@ static void drm_update_vblank_count(struct drm_device *dev, int crtc)
/**
* drm_vblank_enable - enable the vblank interrupt on a CRTC
- * @dev: DRM device
+ * @dev: drm device
* @crtc: CRTC in question
*/
static int drm_vblank_enable(struct drm_device *dev, int crtc)
@@ -876,13 +910,13 @@ static int drm_vblank_enable(struct drm_device *dev, int crtc)
/**
* drm_vblank_get - get a reference count on vblank events
- * @dev: DRM device
+ * @dev: drm device
* @crtc: which CRTC to own
*
* Acquire a reference count on vblank events to avoid having them disabled
* while in use.
*
- * RETURNS
+ * Returns:
* Zero on success, nonzero on failure.
*/
int drm_vblank_get(struct drm_device *dev, int crtc)
@@ -908,7 +942,7 @@ EXPORT_SYMBOL(drm_vblank_get);
/**
* drm_vblank_put - give up ownership of vblank events
- * @dev: DRM device
+ * @dev: drm device
* @crtc: which counter to give up
*
* Release ownership of a given vblank counter, turning off interrupts
@@ -928,8 +962,15 @@ EXPORT_SYMBOL(drm_vblank_put);
/**
* drm_vblank_off - disable vblank events on a CRTC
- * @dev: DRM device
+ * @dev: drm device
* @crtc: CRTC in question
+ *
+ * Drivers can use this function to shut down the vblank interrupt handling when
+ * disabling a crtc. This function ensures that the latest vblank frame count is
+ * stored so that drm_vblank_on can restore it again.
+ *
+ * Drivers must use this function when the hardware vblank counter can get
+ * reset, e.g. when suspending.
*/
void drm_vblank_off(struct drm_device *dev, int crtc)
{
@@ -964,8 +1005,13 @@ EXPORT_SYMBOL(drm_vblank_off);
/**
* drm_vblank_on - enable vblank events on a CRTC
- * @dev: DRM device
+ * @dev: drm device
* @crtc: CRTC in question
+ *
+ * This functions restores the vblank interrupt state captured with
+ * drm_vblank_off() again. Note that calls to drm_vblank_on() and
+ * drm_vblank_off() can be unbalanced and so can also be unconditionaly called
+ * in driver load code to reflect the current hardware state of the crtc.
*/
void drm_vblank_on(struct drm_device *dev, int crtc)
{
@@ -981,11 +1027,26 @@ EXPORT_SYMBOL(drm_vblank_on);
/**
* drm_vblank_pre_modeset - account for vblanks across mode sets
- * @dev: DRM device
+ * @dev: drm device
* @crtc: CRTC in question
*
* Account for vblank events across mode setting events, which will likely
* reset the hardware frame counter.
+ *
+ * This is done by grabbing a temporary vblank reference to ensure that the
+ * vblank interrupt keeps running across the modeset sequence. With this the
+ * software-side vblank frame counting will ensure that there are no jumps or
+ * discontinuities.
+ *
+ * Unfortunately this approach is racy and also doesn't work when the vblank
+ * interrupt stops running, e.g. across system suspend resume. It is therefore
+ * highly recommended that drivers use the newer drm_vblank_off() and
+ * drm_vblank_on() instead. drm_vblank_pre_modeset() only works correctly when
+ * using "cooked" software vblank frame counters and not relying on any hardware
+ * counters.
+ *
+ * Drivers must call drm_vblank_post_modeset() when re-enabling the same crtc
+ * again.
*/
void drm_vblank_pre_modeset(struct drm_device *dev, int crtc)
{
@@ -1007,6 +1068,14 @@ void drm_vblank_pre_modeset(struct drm_device *dev, int crtc)
}
EXPORT_SYMBOL(drm_vblank_pre_modeset);
+/**
+ * drm_vblank_post_modeset - undo drm_vblank_pre_modeset changes
+ * @dev: drm device
+ * @crtc: CRTC in question
+ *
+ * This function again drops the temporary vblank reference acquired in
+ * drm_vblank_pre_modeset.
+ */
void drm_vblank_post_modeset(struct drm_device *dev, int crtc)
{
unsigned long irqflags;
@@ -1028,7 +1097,7 @@ void drm_vblank_post_modeset(struct drm_device *dev, int crtc)
}
EXPORT_SYMBOL(drm_vblank_post_modeset);
-/**
+/*
* drm_modeset_ctl - handle vblank event counter changes across mode switch
* @DRM_IOCTL_ARGS: standard ioctl arguments
*
@@ -1141,11 +1210,11 @@ err_put:
return ret;
}
-/**
+/*
* Wait for VBLANK.
*
* \param inode device inode.
- * \param file_priv DRM file private.
+ * \param file_priv drm file private.
* \param cmd command.
* \param data user argument, pointing to a drm_wait_vblank structure.
* \return zero on success or a negative number on failure.
@@ -1276,7 +1345,7 @@ static void drm_handle_vblank_events(struct drm_device *dev, int crtc)
/**
* drm_handle_vblank - handle a vblank event
- * @dev: DRM device
+ * @dev: drm device
* @crtc: where this event occurred
*
* Drivers should call this routine in their vblank interrupt handlers to
--
1.8.3.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
