Re: [RFC] drm + i915 DP MST code preview

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/03/2014 02:00 AM, Chris Wilson wrote:
On Sat, May 03, 2014 at 07:08:02AM +1000, Dave Airlie wrote:
On 2 May 2014 18:52, Chris Wilson <chris@xxxxxxxxxxxxxxxxxx> wrote:
On Fri, May 02, 2014 at 02:39:37PM +1000, Dave Airlie wrote:
the GUID is only on DP 1.2 devices, so you don't get one for ever
port, also GUIDs are wiped on powerdown on most devices, default GUID
is 0 except where devices have USB hubs as well, so it probably
doesn't make much sense to bother exposing them directly.

Ok. It looks like if we do attempt to maintain persistent naming, we need
to do it in the kernel anyway. That is to make sure that a downstream
device always has the same type-id upon reconnection - at least for the
lifetime of module. Or maybe the output name is irrelevant for
preserving extended desktop configurations?

Dunno if it helps, but for roughly similar reasons we ended up naming the outputs based on their topology paths in the NVIDIA driver. So for example a port named DP-3 that has a Dell UP2414Q attached will show up as two outputs named DP-3.1 and DP-3.8 since its internal bridge uses downstream ports 1 and 8. This has worked out fairly well in practice.

Here's how I described it in the README:

    When DisplayPort 1.2 branch devices are present, display
    devices will be created with type- and connector-based names
    that are based on how they are connected to the branch device
    tree. For example, if a connector named DP-2 has a branch
    device attached and a DisplayPort device is connected to the
    branch device's first downstream port, a display device named
    DP-2.1 might be created. If another branch device is
    connected between the first branch device and the display
    device, the name might be DP-2.1.1.

    To avoid cluttering the output list, DisplayPort 1.2 devices
    can be deleted when they are no longer connected and are not
    named in any MetaModes. This behavior can be enabled with the
    DeleteUnusedDP12Displays option.

http://us.download.nvidia.com/XFree86/Linux-x86/337.19/README/displaydevicenames.html

--
Aaron
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux