Hi Andrzej, Thank you for kind comments. On 04/23/2014 07:16 PM, Andrzej Hajda wrote:
Hi YoungJun, On 04/21/2014 02:28 PM, YoungJun Cho wrote:This patch adds MIPI-DSI command mode based S6E3FA0 AMOLED LCD Panel driver. Changelog v2: - Declares delay, size properties in probe routine instead of DT Changelog v3: - Moves CPU timings relevant properties from FIMD DT (commented by Laurent Pinchart, Andrzej Hajda) Signed-off-by: YoungJun Cho <yj44.cho@xxxxxxxxxxx> Acked-by: Inki Dae <inki.dae@xxxxxxxxxxx> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> --- drivers/gpu/drm/panel/Kconfig | 7 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-s6e3fa0.c | 569 +++++++++++++++++++++++++++++++++ 3 files changed, 577 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-s6e3fa0.c diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 4ec874d..be1392e 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -30,4 +30,11 @@ config DRM_PANEL_S6E8AA0 select DRM_MIPI_DSI select VIDEOMODE_HELPERS +config DRM_PANEL_S6E3FA0 + tristate "S6E3FA0 DSI command mode panel" + depends on DRM && DRM_PANEL + depends on OF + select DRM_MIPI_DSI + select VIDEOMODE_HELPERS + endmenu diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 8b92921..85c6738 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -1,3 +1,4 @@ obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o obj-$(CONFIG_DRM_PANEL_LD9040) += panel-ld9040.o obj-$(CONFIG_DRM_PANEL_S6E8AA0) += panel-s6e8aa0.o +obj-$(CONFIG_DRM_PANEL_S6E3FA0) += panel-s6e3fa0.o diff --git a/drivers/gpu/drm/panel/panel-s6e3fa0.c b/drivers/gpu/drm/panel/panel-s6e3fa0.c new file mode 100644 index 0000000..1282678 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-s6e3fa0.c @@ -0,0 +1,569 @@ +/* + * MIPI-DSI based s6e3fa0 AMOLED LCD 5.7 inch panel driver. + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd + * + * YoungJun Cho <yj44.cho@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <drm/drmP.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_panel.h> + +#include <linux/gpio.h> +#include <linux/of_gpio.h>#include <linux/gpio/consumer.h> should be enough.
Ok, I'll check.
+#include <linux/regulator/consumer.h> + +#include <video/mipi_display.h> +#include <video/of_videomode.h> +#include <video/videomode.h> + +#define MTP_ID_LEN 3 +#define GAMMA_LEVEL_NUM 30 + +struct s6e3fa0 { + struct device *dev; + struct drm_panel panel; + + struct regulator_bulk_data supplies[2]; + struct gpio_desc *reset_gpio; + struct gpio_desc *det_gpio; + struct gpio_desc *te_gpio; + struct videomode vm; + struct drm_panel_cpu_timings cpu_timings; + + unsigned int power_on_delay; + unsigned int reset_delay; + unsigned int init_delay; + unsigned int width_mm; + unsigned int height_mm; + + unsigned char id; + unsigned char vddm; + unsigned int brightness; +}; + +#define panel_to_s6e3fa0(p) container_of(p, struct s6e3fa0, panel) + +static const unsigned char s6e3fa0_vddm_lut[][2] = { + {0x00, 0x0d}, {0x01, 0x0d}, {0x02, 0x0e}, {0x03, 0x0f}, {0x04, 0x10}, + {0x05, 0x11}, {0x06, 0x12}, {0x07, 0x13}, {0x08, 0x14}, {0x09, 0x15}, + {0x0a, 0x16}, {0x0b, 0x17}, {0x0c, 0x18}, {0x0d, 0x19}, {0x0e, 0x1a}, + {0x0f, 0x1b}, {0x10, 0x1c}, {0x11, 0x1d}, {0x12, 0x1e}, {0x13, 0x1f}, + {0x14, 0x20}, {0x15, 0x21}, {0x16, 0x22}, {0x17, 0x23}, {0x18, 0x24}, + {0x19, 0x25}, {0x1a, 0x26}, {0x1b, 0x27}, {0x1c, 0x28}, {0x1d, 0x29}, + {0x1e, 0x2a}, {0x1f, 0x2b}, {0x20, 0x2c}, {0x21, 0x2d}, {0x22, 0x2e}, + {0x23, 0x2f}, {0x24, 0x30}, {0x25, 0x31}, {0x26, 0x32}, {0x27, 0x33}, + {0x28, 0x34}, {0x29, 0x35}, {0x2a, 0x36}, {0x2b, 0x37}, {0x2c, 0x38}, + {0x2d, 0x39}, {0x2e, 0x3a}, {0x2f, 0x3b}, {0x30, 0x3c}, {0x31, 0x3d}, + {0x32, 0x3e}, {0x33, 0x3f}, {0x34, 0x3f}, {0x35, 0x3f}, {0x36, 0x3f}, + {0x37, 0x3f}, {0x38, 0x3f}, {0x39, 0x3f}, {0x3a, 0x3f}, {0x3b, 0x3f}, + {0x3c, 0x3f}, {0x3d, 0x3f}, {0x3e, 0x3f}, {0x3f, 0x3f}, {0x40, 0x0c}, + {0x41, 0x0b}, {0x42, 0x0a}, {0x43, 0x09}, {0x44, 0x08}, {0x45, 0x07}, + {0x46, 0x06}, {0x47, 0x05}, {0x48, 0x04}, {0x49, 0x03}, {0x4a, 0x02}, + {0x4b, 0x01}, {0x4c, 0x40}, {0x4d, 0x41}, {0x4e, 0x42}, {0x4f, 0x43}, + {0x50, 0x44}, {0x51, 0x45}, {0x52, 0x46}, {0x53, 0x47}, {0x54, 0x48}, + {0x55, 0x49}, {0x56, 0x4a}, {0x57, 0x4b}, {0x58, 0x4c}, {0x59, 0x4d}, + {0x5a, 0x4e}, {0x5b, 0x4f}, {0x5c, 0x50}, {0x5d, 0x51}, {0x5e, 0x52}, + {0x5f, 0x53}, {0x60, 0x54}, {0x61, 0x55}, {0x62, 0x56}, {0x63, 0x57}, + {0x64, 0x58}, {0x65, 0x59}, {0x66, 0x5a}, {0x67, 0x5b}, {0x68, 0x5c}, + {0x69, 0x5d}, {0x6a, 0x5e}, {0x6b, 0x5f}, {0x6c, 0x60}, {0x6d, 0x61}, + {0x6e, 0x62}, {0x6f, 0x63}, {0x70, 0x64}, {0x71, 0x65}, {0x72, 0x66}, + {0x73, 0x67}, {0x74, 0x68}, {0x75, 0x69}, {0x76, 0x6a}, {0x77, 0x6b}, + {0x78, 0x6c}, {0x79, 0x6d}, {0x7a, 0x6e}, {0x7b, 0x6f}, {0x7c, 0x70}, + {0x7d, 0x71}, {0x7e, 0x72}, {0x7f, 0x73}, +};Some comment would be helpful.
Okay.
+ +static int s6e3fa0_dcs_read(struct s6e3fa0 *ctx, unsigned char cmd, + void *data, size_t len) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + + return mipi_dsi_dcs_read(dsi, dsi->channel, cmd, data, len); +} + +static void s6e3fa0_dcs_write(struct s6e3fa0 *ctx, const void *data, size_t len) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + + mipi_dsi_dcs_write(dsi, dsi->channel, data, len); +} + +#define s6e3fa0_dcs_write_seq(ctx, seq...) \ +do { \ + const unsigned char d[] = { seq }; \ + BUILD_BUG_ON_MSG(ARRAY_SIZE(d) > 64, "too big seq for stack"); \ + s6e3fa0_dcs_write(ctx, d, ARRAY_SIZE(d)); \ +} while (0) + +#define s6e3fa0_dcs_write_seq_static(ctx, seq...) \ +do { \ + static const unsigned char d[] = { seq }; \ + s6e3fa0_dcs_write(ctx, d, ARRAY_SIZE(d)); \ +} while (0) + +static void s6e3fa0_apply_level_1_key(struct s6e3fa0 *ctx) +{ + s6e3fa0_dcs_write_seq_static(ctx, 0xf0, 0x5a, 0x5a); +} + +static void s6e3fa0_apply_level_2_key(struct s6e3fa0 *ctx, bool on) +{ + if (on) + s6e3fa0_dcs_write_seq_static(ctx, 0xfc, 0x5a, 0x5a); + else + s6e3fa0_dcs_write_seq_static(ctx, 0xfc, 0xa5, 0xa5); +} + +static void s6e3fa0_set_maximum_return_packet_size(struct s6e3fa0 *ctx, + unsigned int size) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + const struct mipi_dsi_host_ops *ops = dsi->host->ops; + + if (ops && ops->transfer) { + unsigned char buf[] = {size, 0}; + struct mipi_dsi_msg msg = { + .channel = dsi->channel, + .type = MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE, + .tx_len = sizeof(buf), + .tx_buf = buf + }; + + ops->transfer(dsi->host, &msg); + } +} + +static void s6e3fa0_read_mtp_id(struct s6e3fa0 *ctx) +{ + unsigned char id[MTP_ID_LEN]; + int ret; + + s6e3fa0_set_maximum_return_packet_size(ctx, MTP_ID_LEN); + ret = s6e3fa0_dcs_read(ctx, 0x04, id, MTP_ID_LEN); + if (ret < MTP_ID_LEN || id[0] == 0x00) { + dev_err(ctx->dev, "failed to read id\n"); + return; + } + + dev_info(ctx->dev, "ID: 0x%02x, 0x%02x, 0x%02x\n", id[0], id[1], id[2]); + + ctx->id = id[2]; +} + +static void s6e3fa0_read_vddm(struct s6e3fa0 *ctx) +{ + unsigned char vddm; + int ret; + + s6e3fa0_apply_level_2_key(ctx, true); + s6e3fa0_dcs_write_seq_static(ctx, 0xb0, 0x16);It seems little bit cryptic, it would be better to document somehow what this sequence is for. I guess datasheet provides at least information what first byte means and standard says clearly that it is DCS for values < 0xb0 and MCS (manufacturer command set) for values >= 0xb0. You can use defines to make it more readable. Please look at panel-ld9040.c how it could be done. s6e3fa0_dcs_write_seq_static(ctx, MCS_MANPWR, 0x16); looks better. The same for other sequences.
Okay, I'll fix it. We need to update panel-s6e8aa0 also before long.
+ s6e3fa0_set_maximum_return_packet_size(ctx, 1); + ret = s6e3fa0_dcs_read(ctx, 0xd7, &vddm, 1); + s6e3fa0_apply_level_2_key(ctx, false); + + if (ret < 1 || vddm > 0x7f) { + dev_err(ctx->dev, "failed to read vddm\n"); + return; + } + + ctx->vddm = s6e3fa0_vddm_lut[vddm][1];In case of error ctx->vddm is zero, and this value is used later by s6e3fa0_set_etc_and_write_vddm. Is it OK?
Right, I have to reinforce this.
Anyway it seems you do not care about DSI transmission errors at all in most places. Maybe it will not hurt but IMO it is asking for troubles.
ditto
+} + +static void s6e3fa0_set_pentile_control(struct s6e3fa0 *ctx) +{ + s6e3fa0_dcs_write_seq_static(ctx, 0xc0, 0x00, 0x02, 0x03, 0x32, 0x03, + 0x44, 0x44, 0xc0, 0x00, 0x1c, 0x20, 0xe8); +} + +static void s6e3fa0_write_als(struct s6e3fa0 *ctx) +{ + s6e3fa0_dcs_write_seq_static(ctx, 0xe3, 0xff, 0xff, 0xff, 0xff); +} + +static void s6e3fa0_set_readability_enhancement(struct s6e3fa0 *ctx) +{ + s6e3fa0_dcs_write_seq_static(ctx, 0xfe, 0x00, 0x03, 0xb0, 0x2b, 0xfe, + 0xe4); +} + +static void s6e3fa0_set_common_control(struct s6e3fa0 *ctx) +{ + s6e3fa0_set_pentile_control(ctx); + s6e3fa0_write_als(ctx); + s6e3fa0_set_readability_enhancement(ctx); +} + +static void s6e3fa0_set_gamma(struct s6e3fa0 *ctx) +{ + s6e3fa0_dcs_write_seq_static(ctx, 0xca, 0x01, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, + 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, + 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, + 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, + 0x00, 0x00, 0x00); +} + +static void s6e3fa0_set_aid(struct s6e3fa0 *ctx) +{ + s6e3fa0_dcs_write_seq_static(ctx, 0xb2, 0x00, 0x06, 0x00, 0x06); +} + +static void s6e3fa0_set_elvss(struct s6e3fa0 *ctx) +{ + s6e3fa0_dcs_write_seq_static(ctx, 0xb6, 0x88, 0x0a); +} + +static void s6e3fa0_update_panel(struct s6e3fa0 *ctx) +{ + s6e3fa0_dcs_write_seq_static(ctx, 0xf7, 0x03); +} + +static void s6e3fa0_write_acl(struct s6e3fa0 *ctx) +{ + s6e3fa0_dcs_write_seq_static(ctx, 0x55, 0x02);That's strange beast. It should be DCS command but I do not see it in spec. Specification violation???
Uhm, I referred s6e3fa0 data sheet. The 0x55 command is used to set parameters for Automatic Current Limit functionality. I'll explain in more detail by comment.
+} + +static void s6e3fa0_set_brightness_control(struct s6e3fa0 *ctx) +{ + s6e3fa0_set_gamma(ctx); + s6e3fa0_set_aid(ctx); + s6e3fa0_set_elvss(ctx); + s6e3fa0_update_panel(ctx); + s6e3fa0_write_acl(ctx); +} + +static void s6e3fa0_set_temperature(struct s6e3fa0 *ctx) +{ + s6e3fa0_dcs_write_seq_static(ctx, 0xb0, 0x05, 0xb8, 0x19); +} + +static void s6e3fa0_set_elvss_control(struct s6e3fa0 *ctx) +{ + s6e3fa0_set_temperature(ctx); + s6e3fa0_set_elvss(ctx); +} + +static void s6e3fa0_set_te_on(struct s6e3fa0 *ctx) +{ + s6e3fa0_dcs_write_seq_static(ctx, 0x35, 0x00);s6e3fa0_dcs_write_seq_static(ctx, MIPI_DCS_SET_TEAR_ON, 0x00);+} + +static void s6e3fa0_set_etc_and_write_vddm(struct s6e3fa0 *ctx) +{ + s6e3fa0_apply_level_2_key(ctx, true); + s6e3fa0_dcs_write_seq(ctx, 0xed, 0x0c, 0x04, 0xff, 0x01, 0xb0, 0x16, + 0xd7, ctx->vddm); + s6e3fa0_apply_level_2_key(ctx, false); +} + +static void s6e3fa0_set_etc_condition(struct s6e3fa0 *ctx) +{ + s6e3fa0_set_te_on(ctx); + s6e3fa0_set_etc_and_write_vddm(ctx); +} + +static void s6e3fa0_panel_init(struct s6e3fa0 *ctx) +{ + s6e3fa0_set_common_control(ctx); + s6e3fa0_set_brightness_control(ctx); + s6e3fa0_set_elvss_control(ctx); + s6e3fa0_set_etc_condition(ctx); + + msleep(ctx->init_delay); +} + +static int s6e3fa0_power_off(struct s6e3fa0 *ctx) +{ + gpiod_set_value(ctx->reset_gpio, 0); + + return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); +} + +static int s6e3fa0_power_on(struct s6e3fa0 *ctx) +{ + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); + if (ret) + return ret; + + msleep(ctx->power_on_delay); + + gpiod_set_value(ctx->reset_gpio, 1); + gpiod_set_value(ctx->reset_gpio, 0); + usleep_range(1000, 2000); + gpiod_set_value(ctx->reset_gpio, 1); + + msleep(ctx->reset_delay); + + return 0; +} + +static void s6e3fa0_set_sequence(struct s6e3fa0 *ctx) +{ + s6e3fa0_apply_level_1_key(ctx); + s6e3fa0_dcs_write_seq_static(ctx, MIPI_DCS_EXIT_SLEEP_MODE); + msleep(20); + + s6e3fa0_read_mtp_id(ctx); + s6e3fa0_read_vddm(ctx); + + s6e3fa0_panel_init(ctx); + + s6e3fa0_dcs_write_seq_static(ctx, MIPI_DCS_SET_DISPLAY_ON); +} + +static int s6e3fa0_disable(struct drm_panel *panel) +{ + struct s6e3fa0 *ctx = panel_to_s6e3fa0(panel); + + s6e3fa0_dcs_write_seq_static(ctx, MIPI_DCS_ENTER_SLEEP_MODE); + s6e3fa0_dcs_write_seq_static(ctx, MIPI_DCS_SET_DISPLAY_OFF); + msleep(35); + + return s6e3fa0_power_off(ctx); +} + +static int s6e3fa0_enable(struct drm_panel *panel) +{ + struct s6e3fa0 *ctx = panel_to_s6e3fa0(panel); + int ret; + + ret = s6e3fa0_power_on(ctx); + if (ret) + return ret; + + s6e3fa0_set_sequence(ctx); + + return ret; +} + +static int s6e3fa0_get_modes(struct drm_panel *panel) +{ + struct drm_connector *connector = panel->connector; + struct s6e3fa0 *ctx = panel_to_s6e3fa0(panel); + struct drm_display_mode *mode; + + mode = drm_mode_create(connector->dev); + if (!mode) { + DRM_ERROR("failed to create a new display mode\n"); + return 0; + } + + drm_display_mode_from_videomode(&ctx->vm, mode); + mode->width_mm = ctx->width_mm; + mode->height_mm = ctx->height_mm; + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + mode->private = (void *)&ctx->cpu_timings; + drm_mode_probed_add(connector, mode); + + return 1; +} + +static const struct drm_panel_funcs s6e3fa0_drm_funcs = { + .disable = s6e3fa0_disable, + .enable = s6e3fa0_enable, + .get_modes = s6e3fa0_get_modes, +}; + +static int s6e3fa0_parse_dt(struct s6e3fa0 *ctx) +{ + struct device *dev = ctx->dev; + struct device_node *np = dev->of_node, *cpu_timing_np; + struct drm_panel_cpu_timings *cpu_timings = &ctx->cpu_timings; + int ret; + + ret = of_get_videomode(np, &ctx->vm, 0); + if (ret) { + dev_err(dev, "failed to get video mode: %d\n", ret); + return ret; + } + + cpu_timing_np = of_find_node_by_name(np, "cpu-timings"); + if (!cpu_timing_np) { + dev_err(dev, "failed to get cpu timings\n"); + return -EINVAL; + } + if (of_property_read_u32(cpu_timing_np, "cs-setup", + &cpu_timings->cs_setup)) + cpu_timings->cs_setup = 0; + if (of_property_read_u32(cpu_timing_np, "wr-setup", + &cpu_timings->wr_setup)) + cpu_timings->wr_setup = 0; + if (of_property_read_u32(cpu_timing_np, "wr-act", + &cpu_timings->wr_act)) + cpu_timings->wr_act = 1; + if (of_property_read_u32(cpu_timing_np, "wr-hold", + &cpu_timings->wr_hold)) + cpu_timings->wr_hold = 0;If I remember default values were not provided in bindings, please fix it.
Okay
+ of_node_put(cpu_timing_np); + + return 0; +} + +irqreturn_t s6e3fa0_det_interrupt(int irq, void *dev_id) +{ + /* TODO */ + return IRQ_HANDLED; +} + +irqreturn_t s6e3fa0_te_interrupt(int irq, void *dev_id) +{ + struct s6e3fa0 *ctx = dev_id; + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + struct mipi_dsi_host *host = dsi->host; + const struct mipi_dsi_host_ops *ops = host->ops; + + if (ops && ops->te_handler) + ops->te_handler(host); + + return IRQ_HANDLED; +} + +static int s6e3fa0_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct s6e3fa0 *ctx; + int ret; + + ctx = devm_kzalloc(dev, sizeof(struct s6e3fa0), GFP_KERNEL); + if (!ctx) { + dev_err(dev, "failed to allocate s6e3fa0 structure.\n"); + return -ENOMEM; + } + + mipi_dsi_set_drvdata(dsi, ctx); + + ctx->dev = dev; + + dsi->lanes = 4; + dsi->format = MIPI_DSI_FMT_RGB888; + + ret = s6e3fa0_parse_dt(ctx); + if (ret) + return ret; + + ctx->supplies[0].supply = "vdd3"; + ctx->supplies[1].supply = "vci"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), + ctx->supplies); + if (ret) { + dev_err(dev, "failed to get regulators: %d\n", ret); + return ret; + } + + ctx->reset_gpio = devm_gpiod_get(dev, "reset"); + if (IS_ERR(ctx->reset_gpio)) { + dev_err(dev, "failed to get reset gpio: %ld\n", + PTR_ERR(ctx->reset_gpio)); + return PTR_ERR(ctx->reset_gpio); + } + ret = gpiod_direction_output(ctx->reset_gpio, 1); + if (ret < 0) { + dev_err(dev, "failed to configure reset gpio: %d\n", ret); + return ret; + } + + ctx->det_gpio = devm_gpiod_get(dev, "det"); + if (IS_ERR(ctx->det_gpio)) { + dev_err(dev, "failed to get det gpio: %ld\n", + PTR_ERR(ctx->det_gpio)); + return PTR_ERR(ctx->det_gpio); + } + ret = gpiod_direction_input(ctx->det_gpio); + if (ret < 0) { + dev_err(dev, "failed to configure det gpio: %d\n", ret); + return ret; + } + ret = devm_request_irq(dev, gpiod_to_irq(ctx->det_gpio), + s6e3fa0_det_interrupt, + IRQF_TRIGGER_FALLING, + "oled-det", ctx); + if (ret) { + dev_err(dev, "failed to request det irq: %d\n", ret); + return ret; + } + + ctx->te_gpio = devm_gpiod_get(dev, "te"); + if (IS_ERR(ctx->te_gpio)) { + dev_err(dev, "failed to get te gpio: %ld\n", + PTR_ERR(ctx->te_gpio)); + return PTR_ERR(ctx->te_gpio); + } + ret = gpiod_direction_input(ctx->te_gpio); + if (ret < 0) { + dev_err(dev, "failed to configure te gpio: %d\n", ret); + return ret; + } + ret = devm_request_irq(dev, gpiod_to_irq(ctx->te_gpio), + s6e3fa0_te_interrupt, + IRQF_TRIGGER_RISING, + "TE", ctx); + if (ret) { + dev_err(dev, "failed to request det irq: %d\n", ret); + return ret; + } + + ctx->power_on_delay = 10; + ctx->reset_delay = 5; + ctx->init_delay = 120; + ctx->width_mm = 71; + ctx->height_mm = 126; + + ctx->brightness = GAMMA_LEVEL_NUM - 1; + + drm_panel_init(&ctx->panel); + ctx->panel.dev = dev; + ctx->panel.funcs = &s6e3fa0_drm_funcs; + + ret = drm_panel_add(&ctx->panel); + if (ret) + return ret; + + ret = mipi_dsi_attach(dsi); + if (ret) + drm_panel_remove(&ctx->panel); + + return ret; +} + +static int s6e3fa0_remove(struct mipi_dsi_device *dsi) +{ + struct s6e3fa0 *ctx = mipi_dsi_get_drvdata(dsi); + + s6e3fa0_power_off(ctx);In case panel is off this will lead to double disable of regulators. In general mipi_dsi_detach should be enough, it will trigger hpd, which will set dpms to off, which will call s6e3fa0_power_off.
Okay, I'll check again. Thank you. Best regards YJ
Regards Andrzej+ + mipi_dsi_detach(dsi); + drm_panel_remove(&ctx->panel); + + return 0; +} + +static struct of_device_id s6e3fa0_of_match[] = { + { .compatible = "samsung,s6e3fa0" }, + { } +}; +MODULE_DEVICE_TABLE(of, s6e3fa0_of_match); + +static struct mipi_dsi_driver s6e3fa0_driver = { + .probe = s6e3fa0_probe, + .remove = s6e3fa0_remove, + .driver = { + .name = "panel_s6e3fa0", + .owner = THIS_MODULE, + .of_match_table = s6e3fa0_of_match, + }, +}; +module_mipi_dsi_driver(s6e3fa0_driver); + +MODULE_AUTHOR("YoungJun Cho <yj44.cho@xxxxxxxxxxx>"); +MODULE_DESCRIPTION("MIPI-DSI based s6e3fa0 AMOLED LCD Panel Driver"); +MODULE_LICENSE("GPL v2");
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
