On 04/21/2014 02:28 PM, YoungJun Cho wrote:
> The offset of register DSIM_PLLTMR_REG in Exynos5420 is different
> from the one in Exynos4 SoC.
>
> In case of Exynos5420 SoC, there is no frequency band bit in DSIM_PLLCTRL_REG,
> and it uses DSIM_PHYCTRL_REG and DSIM_PHYTIMING*_REG instead.
> So this patch adds driver data to distinguish it.
>
> Signed-off-by: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
> Acked-by: Inki Dae <inki.dae@xxxxxxxxxxx>
> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> ---
> drivers/gpu/drm/exynos/exynos_drm_dsi.c | 101 ++++++++++++++++++++++++-------
> 1 file changed, 80 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> index 179f2fa..fcd577f 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> @@ -17,6 +17,7 @@
>
> #include <linux/clk.h>
> #include <linux/irq.h>
> +#include <linux/of_device.h>
> #include <linux/phy/phy.h>
> #include <linux/regulator/consumer.h>
>
> @@ -54,9 +55,12 @@
>
> /* FIFO memory AC characteristic register */
> #define DSIM_PLLCTRL_REG 0x4c /* PLL control register */
> -#define DSIM_PLLTMR_REG 0x50 /* PLL timer register */
> #define DSIM_PHYACCHR_REG 0x54 /* D-PHY AC characteristic register */
> #define DSIM_PHYACCHR1_REG 0x58 /* D-PHY AC characteristic register1 */
> +#define DSIM_PHYCTRL_REG 0x5c
> +#define DSIM_PHYTIMING_REG 0x64
> +#define DSIM_PHYTIMING1_REG 0x68
> +#define DSIM_PHYTIMING2_REG 0x6c
>
> /* DSIM_STATUS */
> #define DSIM_STOP_STATE_DAT(x) (((x) & 0xf) << 0)
> @@ -233,6 +237,12 @@ struct exynos_dsi_transfer {
> #define DSIM_STATE_INITIALIZED BIT(1)
> #define DSIM_STATE_CMD_LPM BIT(2)
>
> +struct exynos_dsi_driver_data {
> + unsigned int plltmr_reg;
> +
> + unsigned int has_freqband:1;
> +};
> +
> struct exynos_dsi {
> struct mipi_dsi_host dsi_host;
> struct drm_connector connector;
> @@ -262,11 +272,39 @@ struct exynos_dsi {
>
> spinlock_t transfer_lock; /* protects transfer_list */
> struct list_head transfer_list;
> +
> + struct exynos_dsi_driver_data *driver_data;
> };
>
> #define host_to_dsi(host) container_of(host, struct exynos_dsi, dsi_host)
> #define connector_to_dsi(c) container_of(c, struct exynos_dsi, connector)
>
> +static struct exynos_dsi_driver_data exynos4_dsi_driver_data = {
> + .plltmr_reg = 0x50,
> + .has_freqband = 1,
> +};
> +
> +static struct exynos_dsi_driver_data exynos5_dsi_driver_data = {
> + .plltmr_reg = 0x58,
> +};
> +
> +static struct of_device_id exynos_dsi_of_match[] = {
> + { .compatible = "samsung,exynos4210-mipi-dsi",
> + .data = &exynos4_dsi_driver_data },
> + { .compatible = "samsung,exynos5420-mipi-dsi",
> + .data = &exynos5_dsi_driver_data },
> + { }
> +};
I wonder if it wouldn't be better to use "samsung,exynos5410-mipi-dsi"
compatible and distinguish 5410 and 5420 by DSIM_VERSION register.
> +
> +static inline struct exynos_dsi_driver_data *exynos_dsi_get_driver_data(
> + struct platform_device *pdev)
> +{
> + const struct of_device_id *of_id =
> + of_match_device(exynos_dsi_of_match, &pdev->dev);
> +
> + return (struct exynos_dsi_driver_data *)of_id->data;
> +}
> +
> static void exynos_dsi_wait_for_reset(struct exynos_dsi *dsi)
> {
> if (wait_for_completion_timeout(&dsi->completed, msecs_to_jiffies(300)))
> @@ -340,14 +378,9 @@ static unsigned long exynos_dsi_pll_find_pms(struct exynos_dsi *dsi,
> static unsigned long exynos_dsi_set_pll(struct exynos_dsi *dsi,
> unsigned long freq)
> {
> - static const unsigned long freq_bands[] = {
> - 100 * MHZ, 120 * MHZ, 160 * MHZ, 200 * MHZ,
> - 270 * MHZ, 320 * MHZ, 390 * MHZ, 450 * MHZ,
> - 510 * MHZ, 560 * MHZ, 640 * MHZ, 690 * MHZ,
> - 770 * MHZ, 870 * MHZ, 950 * MHZ,
> - };
> + struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
> unsigned long fin, fout;
> - int timeout, band;
> + int timeout;
> u8 p, s;
> u16 m;
> u32 reg;
> @@ -368,18 +401,30 @@ static unsigned long exynos_dsi_set_pll(struct exynos_dsi *dsi,
> "failed to find PLL PMS for requested frequency\n");
> return -EFAULT;
> }
> + dev_dbg(dsi->dev, "PLL freq %lu, (p %d, m %d, s %d)\n", fout, p, m, s);
>
> - for (band = 0; band < ARRAY_SIZE(freq_bands); ++band)
> - if (fout < freq_bands[band])
> - break;
> + writel(500, dsi->reg_base + driver_data->plltmr_reg);
> +
> + reg = DSIM_PLL_EN | DSIM_PLL_P(p) | DSIM_PLL_M(m) | DSIM_PLL_S(s);
> +
> + if (driver_data->has_freqband) {
> + static const unsigned long freq_bands[] = {
> + 100 * MHZ, 120 * MHZ, 160 * MHZ, 200 * MHZ,
> + 270 * MHZ, 320 * MHZ, 390 * MHZ, 450 * MHZ,
> + 510 * MHZ, 560 * MHZ, 640 * MHZ, 690 * MHZ,
> + 770 * MHZ, 870 * MHZ, 950 * MHZ,
> + };
> + int band;
>
> - dev_dbg(dsi->dev, "PLL freq %lu, (p %d, m %d, s %d), band %d\n", fout,
> - p, m, s, band);
> + for (band = 0; band < ARRAY_SIZE(freq_bands); ++band)
> + if (fout < freq_bands[band])
> + break;
>
> - writel(500, dsi->reg_base + DSIM_PLLTMR_REG);
> + dev_dbg(dsi->dev, "band %d\n", band);
> +
> + reg |= DSIM_FREQ_BAND(band);
> + }
>
> - reg = DSIM_FREQ_BAND(band) | DSIM_PLL_EN
> - | DSIM_PLL_P(p) | DSIM_PLL_M(m) | DSIM_PLL_S(s);
> writel(reg, dsi->reg_base + DSIM_PLLCTRL_REG);
>
> timeout = 1000;
> @@ -391,6 +436,24 @@ static unsigned long exynos_dsi_set_pll(struct exynos_dsi *dsi,
> reg = readl(dsi->reg_base + DSIM_STATUS_REG);
> } while ((reg & DSIM_PLL_STABLE) == 0);
>
> + if (!driver_data->has_freqband) {
Could you explain why lack of freqband determines necessity of setting PHY
registers, is this a kind of hardware setting dependency?
> + /* b dphy ctrl */
> + reg = 0x0af & 0x1ff;
> + writel(reg, dsi->reg_base + DSIM_PHYCTRL_REG);
> +
> + /* phy timing */
> + reg = 0x06 << 8 | 0x0b;
> + writel(reg, dsi->reg_base + DSIM_PHYTIMING_REG);
> +
> + /* phy timing 1 */
> + reg = 0x07 << 24 | 0x27 << 16 | 0x0d << 8 | 0x08;
> + writel(reg, dsi->reg_base + DSIM_PHYTIMING1_REG);
> +
> + /* phy timing 2 */
> + reg = 0x09 << 16 | 0x0d << 8 | 0x0b;
> + writel(reg, dsi->reg_base + DSIM_PHYTIMING2_REG);
> + }
> +
Please use macros if possible instead of magic numbers.
As I wrote in comment for earlier patch it would be better to separate
setting PHY registers
from clock registers.
> return fout;
> }
>
> @@ -1412,6 +1475,7 @@ static int exynos_dsi_probe(struct platform_device *pdev)
> dsi->dsi_host.dev = &pdev->dev;
>
> dsi->dev = &pdev->dev;
> + dsi->driver_data = exynos_dsi_get_driver_data(pdev);
>
> ret = exynos_dsi_parse_dt(dsi);
> if (ret)
> @@ -1516,11 +1580,6 @@ static const struct dev_pm_ops exynos_dsi_pm_ops = {
> SET_SYSTEM_SLEEP_PM_OPS(exynos_dsi_suspend, exynos_dsi_resume)
> };
>
> -static struct of_device_id exynos_dsi_of_match[] = {
> - { .compatible = "samsung,exynos4210-mipi-dsi" },
> - { }
> -};
> -
> struct platform_driver dsi_driver = {
> .probe = exynos_dsi_probe,
> .remove = exynos_dsi_remove,
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
