Hi Lothar,
On Monday 17 March 2014 16:14:36 Lothar Waßmann wrote:
> Laurent Pinchart wrote:
> > On Monday 17 March 2014 14:41:09 Andrzej Hajda wrote:
> > > On 03/13/2014 06:17 PM, Denis Carikli wrote:
> > > > We need a way to pass signal polarity informations
> > > > between DRM panels, and the display drivers.
> > > >
> > > > To do that, a pol_flags field was added to drm_display_mode.
> > > >
> > > > Signed-off-by: Denis Carikli <denis@xxxxxxxxxx>
> > > > ---
> > > > ChangeLog v10->v11:
> > > > - Since the imx-drm won't be able to retrive its regulators
> > > >
> > > > from the device tree when using display-timings nodes,
> > > > and that I was told that the drm simple-panel driver
> > > > already supported that, I then, instead, added what was
> > > > lacking to make the eukrea displays work with the
> > > > drm-simple-panel driver.
> > > >
> > > > That required a way to get back the display polarity
> > > > informations from the imx-drm driver without affecting
> > > > userspace.
> > > >
> > > > ---
> > > >
> > > > include/drm/drm_crtc.h | 8 ++++++++
> > > > 1 file changed, 8 insertions(+)
> > > >
> > > > diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> > > > index f764654..61a4fe1 100644
> > > > --- a/include/drm/drm_crtc.h
> > > > +++ b/include/drm/drm_crtc.h
> > > > @@ -131,6 +131,13 @@ enum drm_mode_status {
> > > >
> > > > #define DRM_MODE_FLAG_3D_MAX DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF
> > > >
> > > > +#define DRM_MODE_FLAG_POL_PIXDATA_NEGEDGE BIT(1)
> > > > +#define DRM_MODE_FLAG_POL_PIXDATA_POSEDGE BIT(2)
> > > > +#define DRM_MODE_FLAG_POL_PIXDATA_PRESERVE BIT(3)
> > > > +#define DRM_MODE_FLAG_POL_DE_NEGEDGE BIT(4)
> > > > +#define DRM_MODE_FLAG_POL_DE_POSEDGE BIT(5)
> > > > +#define DRM_MODE_FLAG_POL_DE_PRESERVE BIT(6)
> > >
> > > Could you add some description to these flags.
> > > What are *_PRESERVE flags for?
> > > Are those flags 1:1 compatible with respective 'videomode:flags'?
> > > I guess DE flags should be rather DRM_MODE_FLAG_POL_DE_(LOW|HIGH), am I
> > > right?
> >
> > Possibly nitpicking, I wouldn't call the clock edge on which data signals
> > are generated/sampled "data polarity". This is clock polarity
> > information.
> >
> > Have you seen cases where pixel data and DE are geenrated or need to be
> > sampled on different edges ?
>
> DE is not a clock signal, but an 'Enable' signal whose value (high or
> low) defines the window in which the pixel data is valid.
> The flag defines whether data is valid during the HIGH or LOW period of
> DE.
The DRM_MODE_FLAG_POL_DE_(LOW|HIGH) do, by my impression of the proposed new
DRM_MODE_FLAG_POL_DE_*EDGE flags is that they define sampling clock edges, not
active levels.
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
