The connection between the video source and sink must follow
the media video interface.
Signed-off-by: Jean-Francois Moine <moinejf@xxxxxxx>
---
Documentation/devicetree/bindings/drm/tilcdc/slave.txt | 18 ------------------
.../devicetree/bindings/drm/tilcdc/tilcdc.txt | 6 ++++++
2 files changed, 6 insertions(+), 18 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/drm/tilcdc/slave.txt
diff --git a/Documentation/devicetree/bindings/drm/tilcdc/slave.txt b/Documentation/devicetree/bindings/drm/tilcdc/slave.txt
deleted file mode 100644
index 3d2c524..0000000
--- a/Documentation/devicetree/bindings/drm/tilcdc/slave.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Device-Tree bindings for tilcdc DRM encoder slave output driver
-
-Required properties:
- - compatible: value should be "ti,tilcdc,slave".
- - i2c: the phandle for the i2c device the encoder slave is connected to
-
-Recommended properties:
- - pinctrl-names, pinctrl-0: the pincontrol settings to configure
- muxing properly for pins that connect to TFP410 device
-
-Example:
-
- hdmi {
- compatible = "ti,tilcdc,slave";
- i2c = <&i2c0>;
- pinctrl-names = "default";
- pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
- };
diff --git a/Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt
index fff10da..425e288 100644
--- a/Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt
+++ b/Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt
@@ -18,6 +18,12 @@ Optional properties:
- max-pixelclock: The maximum pixel clock that can be supported
by the lcd controller in KHz.
+Optional nodes:
+
+ - port: reference of the video sink as described in media/video-interfaces.
+ This reference is required when the video sink is the TDA998x HDMI
+ transmitter.
+
Example:
fb: fb@4830e000 {
--
1.9.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
