On 03/05/2014 06:56 AM, Inki Dae wrote:
> 2014-02-12 20:31 GMT+09:00 Andrzej Hajda <a.hajda@xxxxxxxxxxx>:
>> The patch adds DT bindings for Exynos DSI Master. DSIM follows rules
>> for DSI bus host bindings [1].
>> Properties describes its resources: memory, interrupt, clocks,
>> phy, regulators and frequencies of clocks.
>>
>> [1]: Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
>>
>> Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
>> ---
>> v2
>> - added burst and esc clock frequency properties
>> - add samsung prefix to all frequency props
>> ---
>> .../devicetree/bindings/video/exynos_dsim.txt | 53 ++++++++++++++++++++++
>> 1 file changed, 53 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/video/exynos_dsim.txt
>>
>> diff --git a/Documentation/devicetree/bindings/video/exynos_dsim.txt b/Documentation/devicetree/bindings/video/exynos_dsim.txt
>> new file mode 100644
>> index 0000000..2a49704
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/video/exynos_dsim.txt
>> @@ -0,0 +1,53 @@
>> +Exynos MIPI DSI Master
>> +
>> +Required properties:
>> + - compatible: "samsung,exynos4210-mipi-dsi"
>> + - reg: physical base address and length of the registers set for the device
>> + - interrupts: should contain DSI interrupt
>> + - clocks: list of clock specifiers, must contain an entry for each required
>> + entry in clock-names
>> + - clock-names: should include "bus_clk"and "pll_clk" entries
>> + - phys: list of phy specifiers, must contain an entry for each required
>> + entry in phy-names
>> + - phy-names: should include "dsim" entry
>> + - vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V)
>> + - vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
>> + - samsung,pll-clock-frequency: specifies frequency of the "pll_clk" clock
>> + - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst
>> + mode
>> + - samsung,esc-clock-frequency: specifies DSI frequency in escape mode
>> + - #address-cells, #size-cells: should be set respectively to <1> and <0>
>> + according to DSI host bindings (see MIPI DSI bindings [1])
>> +
>> +Optional properties:
>> + - samsung,power-domain: a phandle to DSIM power domain node
>> +
>> +Child nodes:
>> + Should contain DSI peripheral nodes (see DSI bindings [1])
>> +
>> +[1]: Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
>> +
>> +Example:
>> +
>> + dsi@11C80000 {
>> + compatible = "samsung,exynos4210-mipi-dsi";
>> + reg = <0x11C80000 0x10000>;
>> + interrupts = <0 79 0>;
>> + clocks = <&clock 286>, <&clock 143>;
>> + clock-names = "bus_clk", "pll_clk";
>> + phys = <&mipi_phy 1>;
>> + phy-names = "dsim";
>> + vddcore-supply = <&vusb_reg>;
>> + vddio-supply = <&vmipi_reg>;
>> + samsung,power-domain = <&pd_lcd0>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + samsung,pll-clock-frequency = <24000000>;
>> + samsung,burst-clock-frequency = <500000000>;
>> + samsung,esc-clock-frequency = <20000000>;
> Isn't a property indicating cpu or video mode needed for the future
> even though now DSI driver doesn't support CPU interface yet? Which
> mode is used would depend on machine.
Mode is determined by panel, ie. by dsi slave.
Regards
Andrzej
>
>> +
>> + panel@0 {
>> + reg = <0>;
>> + ...
>> + };
>> + };
>> --
>> 1.8.3.2
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@xxxxxxxxxxxxxxxxxxxxx
>> http://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
