On Fri, Feb 28, 2014 at 02:20:11PM +0200, Tomi Valkeinen wrote:
> Add DT binding documentation for HDMI Connector.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> Reviewed-by: Archit Taneja <archit@xxxxxx>
> ---
> .../devicetree/bindings/video/hdmi-connector.txt | 23 ++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/video/hdmi-connector.txt
>
> diff --git a/Documentation/devicetree/bindings/video/hdmi-connector.txt b/Documentation/devicetree/bindings/video/hdmi-connector.txt
> new file mode 100644
> index 000000000000..5d25f6a432bb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/hdmi-connector.txt
> @@ -0,0 +1,23 @@
> +HDMI Connector
> +==============
> +
> +Required properties:
> +- compatible: "hdmi-connector"
> +
> +Optional properties:
> +- label: a symbolic name for the connector
> +
> +Required nodes:
> +- Video port for HDMI input
> +
> +Example
> +-------
> +
> +hdmi0: connector@1 {
> + compatible = "hdmi-connector";
> + label = "hdmi";
> +
> + hdmi_connector_in: endpoint {
> + remote-endpoint = <&tpd12s015_out>;
> + };
> +};
It seems rather weird to have DVI connectors having an optional I2C
property, but HDMI (which augments DVI) not having that as at least an
optional property.
I can quite well see the iMX HDMI support needing an i2c bus here.
Also, HDMI has two connector standards - type A and type B, much like
the single vs dual link of DVI. Again, DRM exposes this to userspace.
--
FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly
improving, and getting towards what was expected from it.
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
