Am Freitag, den 28.02.2014, 14:20 +0200 schrieb Tomi Valkeinen:
> Add DT binding documentation for MIPI DPI Panel.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> Reviewed-by: Archit Taneja <archit@xxxxxx>
> ---
> .../devicetree/bindings/video/panel-dpi.txt | 43 ++++++++++++++++++++++
> 1 file changed, 43 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/video/panel-dpi.txt
>
> diff --git a/Documentation/devicetree/bindings/video/panel-dpi.txt b/Documentation/devicetree/bindings/video/panel-dpi.txt
> new file mode 100644
> index 000000000000..72636c6f1c67
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/panel-dpi.txt
> @@ -0,0 +1,43 @@
> +Generic MIPI DPI Panel
> +======================
> +
> +Required properties:
> +- compatible: "panel-dpi"
> +
> +Optional properties:
> +- label: a symbolic name for the panel
> +- gpios: panel enable gpio and backlight enable gpio
> +
> +Required nodes:
> +- "panel-timing" containing video timings
> + (Documentation/devicetree/bindings/video/display-timing.txt)
> +- Video port for DPI input
I don't see anything MIPI specific here. Couldn't this be added to the
existing simple-panel binding?
> +Example
> +-------
> +
> +lcd0: display@0 {
> + compatible = "samsung,lte430wq-f0c", "panel-dpi";
> + label = "lcd";
> +
> + lcd_in: endpoint {
> + remote-endpoint = <&dpi_out>;
> + };
> +
> + panel-timing {
> + clock-frequency = <9200000>;
> + hactive = <480>;
> + vactive = <272>;
> + hfront-porch = <8>;
> + hback-porch = <4>;
> + hsync-len = <41>;
> + vback-porch = <2>;
> + vfront-porch = <4>;
> + vsync-len = <10>;
> +
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <1>;
> + };
> +};
regards
Philipp
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
