On 25/02/14 16:23, Philipp Zabel wrote:
> +Freescale i.MX DRM master device
> +================================
> +
> +The freescale i.MX DRM master device is a virtual device needed to list all
> +IPU or other display interface nodes that comprise the graphics subsystem.
> +
> +Required properties:
> +- compatible: Should be "fsl,imx-drm"
> +- ports: Should contain a list of phandles pointing to display interface ports
> + of IPU devices
> +
> +example:
> +
> +imx-drm {
> + compatible = "fsl,imx-drm";
> + ports = <&ipu_di0>;
> +};
I'm not a fan of having non-hardware related things in the DT data.
Especially if it makes direct references to our SW, in this case DRM.
There's no DRM on the board. I wanted to avoid all that with OMAP
display bindings.
Is there even need for such a master device? You can find all the
connected display devices from any single display device, by just
following the endpoint links.
> display@di0 {
> compatible = "fsl,imx-parallel-display";
> edid = [edid-data];
> - crtc = <&ipu 0>;
> interface-pix-fmt = "rgb24";
> +
> + port {
> + display_in: endpoint {
> + remote-endpoint = <&ipu_di0_disp0>;
> + };
> + };
> };
Shouldn't the pix-fmt be defined in the endpoint node? It is about pixel
format for a particular endpoint, isn't it?
> diff --git a/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt b/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
> index ed93778..578a1fc 100644
> --- a/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
> +++ b/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
> @@ -50,12 +50,14 @@ have a look at Documentation/devicetree/bindings/video/display-timing.txt.
>
> Required properties:
> - reg : should be <0> or <1>
> - - crtcs : a list of phandles with index pointing to the IPU display interfaces
> - that can be used as video source for this channel.
> - fsl,data-mapping : should be "spwg" or "jeida"
> This describes how the color bits are laid out in the
> serialized LVDS signal.
> - fsl,data-width : should be <18> or <24>
> + - port: A port node with endpoint definitions as defined in
> + Documentation/devicetree/bindings/media/video-interfaces.txt.
> + On i.MX6, there should be four ports (port@[0-3]) that correspond
> + to the four LVDS multiplexer inputs.
Is the ldb something that's on the imx SoC?
Do you have a public branch somewhere? It'd be easier to look at the
final result, as I'm not familiar with imx.
Tomi
Attachment:
signature.asc
Description: OpenPGP digital signature
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
