From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
The sprite planes (in fact all display planes starting from gen4)
support 180 degree rotation. Add the relevant low level bits to the
sprite code to make use of that feature.
The upper layers are not yet plugged in.
v2: HSW handles the rotated buffer offset automagically
v3: BDW also handles the rotated buffer offset automagically
Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
Cc: David Airlie <airlied@xxxxxxxx>
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Signed-off-by: Sagar Kamble <sagar.a.kamble@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 3 +++
drivers/gpu/drm/i915/intel_drv.h | 1 +
drivers/gpu/drm/i915/intel_sprite.c | 37 +++++++++++++++++++++++++++++++++++++
3 files changed, 41 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index abd18cd..57906c5 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3637,6 +3637,7 @@
#define DVS_YUV_ORDER_UYVY (1<<16)
#define DVS_YUV_ORDER_YVYU (2<<16)
#define DVS_YUV_ORDER_VYUY (3<<16)
+#define DVS_ROTATE_180 (1<<15)
#define DVS_DEST_KEY (1<<2)
#define DVS_TRICKLE_FEED_DISABLE (1<<14)
#define DVS_TILED (1<<10)
@@ -3707,6 +3708,7 @@
#define SPRITE_YUV_ORDER_UYVY (1<<16)
#define SPRITE_YUV_ORDER_YVYU (2<<16)
#define SPRITE_YUV_ORDER_VYUY (3<<16)
+#define SPRITE_ROTATE_180 (1<<15)
#define SPRITE_TRICKLE_FEED_DISABLE (1<<14)
#define SPRITE_INT_GAMMA_ENABLE (1<<13)
#define SPRITE_TILED (1<<10)
@@ -3780,6 +3782,7 @@
#define SP_YUV_ORDER_UYVY (1<<16)
#define SP_YUV_ORDER_YVYU (2<<16)
#define SP_YUV_ORDER_VYUY (3<<16)
+#define SP_ROTATE_180 (1<<15)
#define SP_TILED (1<<10)
#define _SPALINOFF (VLV_DISPLAY_BASE + 0x72184)
#define _SPASTRIDE (VLV_DISPLAY_BASE + 0x72188)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 44067bc..85864fc 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -397,6 +397,7 @@ struct intel_plane {
unsigned int crtc_w, crtc_h;
uint32_t src_x, src_y;
uint32_t src_w, src_h;
+ unsigned int rotation;
/* Since we need to change the watermarks before/after
* enabling/disabling the planes, we need to store the parameters here
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 336ae6c..2076878 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -60,6 +60,7 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
sprctl &= ~SP_PIXFORMAT_MASK;
sprctl &= ~SP_YUV_BYTE_ORDER_MASK;
sprctl &= ~SP_TILED;
+ sprctl &= ~SP_ROTATE_180;
switch (fb->pixel_format) {
case DRM_FORMAT_YUYV:
@@ -131,6 +132,14 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
fb->pitches[0]);
linear_offset -= sprsurf_offset;
+ if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+ sprctl |= SP_ROTATE_180;
+
+ x += src_w;
+ y += src_h;
+ linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
+ }
+
I915_WRITE(SPSTRIDE(pipe, plane), fb->pitches[0]);
I915_WRITE(SPPOS(pipe, plane), (crtc_y << 16) | crtc_x);
@@ -238,6 +247,7 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
sprctl &= ~SPRITE_RGB_ORDER_RGBX;
sprctl &= ~SPRITE_YUV_BYTE_ORDER_MASK;
sprctl &= ~SPRITE_TILED;
+ sprctl &= ~SPRITE_ROTATE_180;
switch (fb->pixel_format) {
case DRM_FORMAT_XBGR8888:
@@ -299,6 +309,17 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
pixel_size, fb->pitches[0]);
linear_offset -= sprsurf_offset;
+ if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+ sprctl |= SPRITE_ROTATE_180;
+
+ /* HSW and BDW does this automagically in hardware */
+ if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
+ x += src_w;
+ y += src_h;
+ linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
+ }
+ }
+
I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]);
I915_WRITE(SPRPOS(pipe), (crtc_y << 16) | crtc_x);
@@ -422,6 +443,7 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
dvscntr &= ~DVS_RGB_ORDER_XBGR;
dvscntr &= ~DVS_YUV_BYTE_ORDER_MASK;
dvscntr &= ~DVS_TILED;
+ dvscntr &= ~DVS_ROTATE_180;
switch (fb->pixel_format) {
case DRM_FORMAT_XBGR8888:
@@ -478,6 +500,14 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
pixel_size, fb->pitches[0]);
linear_offset -= dvssurf_offset;
+ if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+ dvscntr |= DVS_ROTATE_180;
+
+ x += src_w;
+ y += src_h;
+ linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
+ }
+
I915_WRITE(DVSSTRIDE(pipe), fb->pitches[0]);
I915_WRITE(DVSPOS(pipe), (crtc_y << 16) | crtc_x);
@@ -739,6 +769,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
max_scale = intel_plane->max_downscale << 16;
min_scale = intel_plane->can_scale ? 1 : (1 << 16);
+ drm_rect_rotate(&src, fb->width << 16, fb->height << 16,
+ intel_plane->rotation);
+
hscale = drm_rect_calc_hscale_relaxed(&src, &dst, min_scale, max_scale);
BUG_ON(hscale < 0);
@@ -777,6 +810,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
drm_rect_width(&dst) * hscale - drm_rect_width(&src),
drm_rect_height(&dst) * vscale - drm_rect_height(&src));
+ drm_rect_rotate_inv(&src, fb->width << 16, fb->height << 16,
+ intel_plane->rotation);
+
/* sanity check to make sure the src viewport wasn't enlarged */
WARN_ON(src.x1 < (int) src_x ||
src.y1 < (int) src_y ||
@@ -1141,6 +1177,7 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
intel_plane->pipe = pipe;
intel_plane->plane = plane;
+ intel_plane->rotation = BIT(DRM_ROTATE_0);
possible_crtcs = (1 << pipe);
ret = drm_plane_init(dev, &intel_plane->base, possible_crtcs,
&intel_plane_funcs,
--
1.8.5
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
