[Bug 60879] [radeonsi] X11 can't start with acceleration enabled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Comment # 62 on bug 60879 from
(In reply to comment #61)
> Hi Tom Stellard!
> 
> Now I updated kernel to 3.13, drm from git, radeon x driver from git and
> mesa from git with above patch. And patch really fixed problem with glamor
> rendering :-)
> 
> Here is output from glxgears
> 
> $ glxgears 
> Default raster_config = 0x124a
> rb mask = 10
> Final raster_config = 0x124f
> Default raster_config = 0x124a
> rb mask = 10
> Final raster_config = 0x124f
> Running synchronized to the vertical refresh.  The framerate should be
> approximately the same as the monitor refresh rate.
> 270 frames in 5.0 seconds = 53.990 FPS
> ^C
> 
> Tested also with 3.14-rc1 kernel and still working. But with old kernels
> (3.11) there is same problem and not working.

Older kernels don't provide an interface to query the enabled backends.  It
should work with 3.12.x and newer.


You are receiving this mail because:
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux