The hardware cursor colours are stored in the DAC indexed registers.
The algorithm for setting these colours via their corresponding index
was off by a value of 0x03.
It was also noted that the R and B bytes were being misread from the
cursor buffer. Assuming the transparency is the MSB (bits 31-24),
then R should be bits 23-16, G should be bits 15-8 and B should be
the LSB or bits 7-0.
Signed-off-by: Julia Lemire <jlemire@xxxxxxxxxx>
---
drivers/gpu/drm/mgag200/mgag200_cursor.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/mgag200/mgag200_cursor.c b/drivers/gpu/drm/mgag200/mgag200_cursor.c
index 801731a..24463b8 100644
--- a/drivers/gpu/drm/mgag200/mgag200_cursor.c
+++ b/drivers/gpu/drm/mgag200/mgag200_cursor.c
@@ -32,7 +32,7 @@ int mga_crtc_cursor_set(struct drm_crtc *crtc,
uint32_t width,
uint32_t height)
{
- struct drm_device *dev = (struct drm_device *)file_priv->minor->dev;
+ struct drm_device *dev = crtc->dev;
struct mga_device *mdev = (struct mga_device *)dev->dev_private;
struct mgag200_bo *pixels_1 = mdev->cursor.pixels_1;
struct mgag200_bo *pixels_2 = mdev->cursor.pixels_2;
@@ -45,12 +45,12 @@ int mga_crtc_cursor_set(struct drm_crtc *crtc,
uint32_t colour_set[16];
uint32_t *next_space = &colour_set[0];
uint32_t *palette_iter;
- uint32_t this_colour;
+ uint32_t this_colour; /* 32-bit colour encoded pixel */
bool found = false;
int colour_count = 0;
u64 gpu_addr;
u8 reg_index;
- u8 this_row[48];
+ u8 this_row[48]; /* cursor bitmap row array */
if (!pixels_1 || !pixels_2) {
WREG8(MGA_CURPOSXL, 0);
@@ -171,14 +171,20 @@ int mga_crtc_cursor_set(struct drm_crtc *crtc,
}
/* Program colours from cursor icon into palette */
+ /* Colour is received as RGB, where R are the MSB and B are the LSB. */
+ /* The first three colours are located between indexes 0x08-0x12. */
+ /* The remaining colours are located between indexes 0x60-0x86. */
for (i = 0; i < colour_count; i++) {
if (i <= 2)
reg_index = 0x8 + i*0x4;
else
- reg_index = 0x60 + i*0x3;
- WREG_DAC(reg_index, colour_set[i] & 0xff);
+ reg_index = 0x60 + (i-3)*0x3;
+ /* Write the Red bits. */
+ WREG_DAC(reg_index, colour_set[i]>>16 & 0xff);
+ /* Write the Green bits. */
WREG_DAC(reg_index+1, colour_set[i]>>8 & 0xff);
- WREG_DAC(reg_index+2, colour_set[i]>>16 & 0xff);
+ /* Write the Blue bits. */
+ WREG_DAC(reg_index+2, colour_set[i] & 0xff);
BUG_ON((colour_set[i]>>24 & 0xff) != 0xff);
}
--
1.7.10.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
