There is no need to enable/disable EDID read IRQ at each EDID block read. This patch enables the IRQ at init time. Signed-off-by: Jean-Francois Moine <moinejf@xxxxxxx> --- drivers/gpu/drm/i2c/tda998x_drv.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c index 0231e44..967f9ce 100644 --- a/drivers/gpu/drm/i2c/tda998x_drv.c +++ b/drivers/gpu/drm/i2c/tda998x_drv.c @@ -977,9 +977,6 @@ read_edid_block(struct drm_encoder *encoder, uint8_t *buf, int blk) uint8_t offset, segptr; int ret, i; - /* enable EDID read irq: */ - reg_set(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD); - offset = (blk & 1) ? 128 : 0; segptr = blk / 2; @@ -1014,8 +1011,6 @@ read_edid_block(struct drm_encoder *encoder, uint8_t *buf, int blk) return ret; } - reg_clear(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD); - return 0; } @@ -1234,6 +1229,9 @@ tda998x_encoder_init(struct i2c_client *client, cec_write(priv, REG_CEC_FRO_IM_CLK_CTRL, CEC_FRO_IM_CLK_CTRL_GHOST_DIS | CEC_FRO_IM_CLK_CTRL_IMCLK_SEL); + /* enable EDID read irq: */ + reg_set(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD); + if (!np) return 0; /* non-DT */ -- 1.8.5.3 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
