[PATCH 2/2] drm/radeon: set correct number of banks for CIK chips in DCE

[Marek Olšák <maraeo@xxxxxxxxx>]

From: Marek Olšák <marek.olsak@xxxxxxx>

We don't have the NUM_BANKS parameter, so we have to calculate it
from the other parameters. NUM_BANKS is not constant on CIK.

This fixes 2D tiling for the display engine on CIK.

Signed-off-by: Marek Olšák <marek.olsak@xxxxxxx>
---
 drivers/gpu/drm/radeon/atombios_crtc.c | 64 +++++++++++++++++++++++-----------
 1 file changed, 43 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index ec97bad..0b9621c 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1143,31 +1143,53 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc,
 	}
 
 	if (tiling_flags & RADEON_TILING_MACRO) {
-		if (rdev->family >= CHIP_BONAIRE)
-			tmp = rdev->config.cik.tile_config;
-		else if (rdev->family >= CHIP_TAHITI)
-			tmp = rdev->config.si.tile_config;
-		else if (rdev->family >= CHIP_CAYMAN)
-			tmp = rdev->config.cayman.tile_config;
-		else
-			tmp = rdev->config.evergreen.tile_config;
+		evergreen_tiling_fields(tiling_flags, &bankw, &bankh, &mtaspect, &tile_split);
 
-		switch ((tmp & 0xf0) >> 4) {
-		case 0: /* 4 banks */
-			fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_4_BANK);
-			break;
-		case 1: /* 8 banks */
-		default:
-			fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_8_BANK);
-			break;
-		case 2: /* 16 banks */
-			fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_16_BANK);
-			break;
+		/* Set NUM_BANKS. */
+		if (rdev->family >= CHIP_BONAIRE) {
+			unsigned tileb, index, num_banks, tile_split_bytes;
+
+			/* Calculate the macrotile mode index. */
+			tile_split_bytes = 64 << tile_split;
+			tileb = 8 * 8 * target_fb->bits_per_pixel / 8;
+			tileb = min(tile_split_bytes, tileb);
+
+			for (index = 0; tileb > 64; index++) {
+				tileb >>= 1;
+			}
+
+			if (index >= 16) {
+				DRM_ERROR("Wrong screen bpp (%u) or tile split (%u)\n",
+					  target_fb->bits_per_pixel, tile_split);
+				return -EINVAL;
+			}
+
+			num_banks = (rdev->config.cik.macrotile_mode_array[index] >> 6) & 0x3;
+			fb_format |= EVERGREEN_GRPH_NUM_BANKS(num_banks);
+		} else {
+			/* SI and older. */
+			if (rdev->family >= CHIP_TAHITI)
+				tmp = rdev->config.si.tile_config;
+			else if (rdev->family >= CHIP_CAYMAN)
+				tmp = rdev->config.cayman.tile_config;
+			else
+				tmp = rdev->config.evergreen.tile_config;
+
+			switch ((tmp & 0xf0) >> 4) {
+			case 0: /* 4 banks */
+				fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_4_BANK);
+				break;
+			case 1: /* 8 banks */
+			default:
+				fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_8_BANK);
+				break;
+			case 2: /* 16 banks */
+				fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_16_BANK);
+				break;
+			}
 		}
 
 		fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_2D_TILED_THIN1);
-
-		evergreen_tiling_fields(tiling_flags, &bankw, &bankh, &mtaspect, &tile_split);
 		fb_format |= EVERGREEN_GRPH_TILE_SPLIT(tile_split);
 		fb_format |= EVERGREEN_GRPH_BANK_WIDTH(bankw);
 		fb_format |= EVERGREEN_GRPH_BANK_HEIGHT(bankh);
-- 
1.8.3.2

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel