Make sure interrupts are enabled
before we enable thermal interrupts.
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
---
drivers/gpu/drm/radeon/radeon_asic.c | 4 ++++
drivers/gpu/drm/radeon/radeon_asic.h | 1 +
drivers/gpu/drm/radeon/rv770_dpm.c | 22 ++++++++++++++++++++++
3 files changed, 27 insertions(+)
diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c
index a38ce4c..9c047b8 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.c
+++ b/drivers/gpu/drm/radeon/radeon_asic.c
@@ -1241,6 +1241,7 @@ static struct radeon_asic rv770_asic = {
.init = &rv770_dpm_init,
.setup_asic = &rv770_dpm_setup_asic,
.enable = &rv770_dpm_enable,
+ .late_enable = &rv770_dpm_late_enable,
.disable = &rv770_dpm_disable,
.pre_set_power_state = &r600_dpm_pre_set_power_state,
.set_power_state = &rv770_dpm_set_power_state,
@@ -1359,6 +1360,7 @@ static struct radeon_asic evergreen_asic = {
.init = &cypress_dpm_init,
.setup_asic = &cypress_dpm_setup_asic,
.enable = &cypress_dpm_enable,
+ .late_enable = &rv770_dpm_late_enable,
.disable = &cypress_dpm_disable,
.pre_set_power_state = &r600_dpm_pre_set_power_state,
.set_power_state = &cypress_dpm_set_power_state,
@@ -1542,6 +1544,7 @@ static struct radeon_asic btc_asic = {
.init = &btc_dpm_init,
.setup_asic = &btc_dpm_setup_asic,
.enable = &btc_dpm_enable,
+ .late_enable = &rv770_dpm_late_enable,
.disable = &btc_dpm_disable,
.pre_set_power_state = &btc_dpm_pre_set_power_state,
.set_power_state = &btc_dpm_set_power_state,
@@ -1685,6 +1688,7 @@ static struct radeon_asic cayman_asic = {
.init = &ni_dpm_init,
.setup_asic = &ni_dpm_setup_asic,
.enable = &ni_dpm_enable,
+ .late_enable = &rv770_dpm_late_enable,
.disable = &ni_dpm_disable,
.pre_set_power_state = &ni_dpm_pre_set_power_state,
.set_power_state = &ni_dpm_set_power_state,
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index 438839f..85e55c1 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -455,6 +455,7 @@ int rv770_get_temp(struct radeon_device *rdev);
/* rv7xx pm */
int rv770_dpm_init(struct radeon_device *rdev);
int rv770_dpm_enable(struct radeon_device *rdev);
+int rv770_dpm_late_enable(struct radeon_device *rdev);
void rv770_dpm_disable(struct radeon_device *rdev);
int rv770_dpm_set_power_state(struct radeon_device *rdev);
void rv770_dpm_setup_asic(struct radeon_device *rdev);
diff --git a/drivers/gpu/drm/radeon/rv770_dpm.c b/drivers/gpu/drm/radeon/rv770_dpm.c
index 374499d..5d6188f 100644
--- a/drivers/gpu/drm/radeon/rv770_dpm.c
+++ b/drivers/gpu/drm/radeon/rv770_dpm.c
@@ -1986,6 +1986,28 @@ int rv770_dpm_enable(struct radeon_device *rdev)
return 0;
}
+int rv770_dpm_late_enable(struct radeon_device *rdev)
+{
+ int ret;
+
+ if (rdev->irq.installed &&
+ r600_is_internal_thermal_sensor(rdev->pm.int_thermal_type)) {
+ PPSMC_Result result;
+
+ ret = rv770_set_thermal_temperature_range(rdev, R600_TEMP_RANGE_MIN, R600_TEMP_RANGE_MAX);
+ if (ret)
+ return ret;
+ rdev->irq.dpm_thermal = true;
+ radeon_irq_set(rdev);
+ result = rv770_send_msg_to_smc(rdev, PPSMC_MSG_EnableThermalInterrupt);
+
+ if (result != PPSMC_Result_OK)
+ DRM_DEBUG_KMS("Could not enable thermal interrupts.\n");
+ }
+
+ return 0;
+}
+
void rv770_dpm_disable(struct radeon_device *rdev)
{
struct rv7xx_power_info *pi = rv770_get_pi(rdev);
--
1.8.3.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
