Hi Thierry,
On Monday 02 of December 2013 16:37:11 Thierry Reding wrote:
> Document the device tree bindings for the MIPI DSI bus. The MIPI Display
> Serial Interface specifies a serial bus and a protocol for communication
> between a host and up to four peripherals.
>
> Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
> ---
> .../devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt | 54 ++++++++++++++++++++++
> 1 file changed, 54 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
>
> diff --git a/Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt b/Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
> new file mode 100644
> index 000000000000..f58ca4485a2f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
> @@ -0,0 +1,54 @@
> +MIPI DSI (Display Serial Interface) busses
> +==========================================
> +
> +The MIPI Display Serial Interface specifies a serial bus and a protocol for
> +communication between a host and up to four peripherals. This document will
> +define the syntax used to represent a DSI bus in a device tree.
> +
> +This document describes DSI bus-specific properties only or defines existing
> +standard properties in the context of the DSI bus.
> +
> +Each DSI host provides a DSI bus. The DSI host controller's node contains a
> +set of properties that characterize the bus. Child nodes describe individual
> +peripherals on that bus.
> +
> +DSI host
> +--------
> +
> +In addition to the standard properties and those defined by the parent bus of
> +a DSI host, the following properties apply to a node representing a DSI host.
> +
> +Required properties:
> +- #address-cells: The number of cells required to represent an address on the
> + bus. DSI peripherals are addressed using a 2-bit virtual channel number, so
> + a maximum of 4 devices can be addressed on a single bus. Hence the value of
> + this property should be 1.
> +- #size-cells: Should be 0.
> +
> +DSI peripheral
> +--------------
> +
> +Peripherals are represented as child nodes of the DSI host's node. Properties
> +described here apply to all DSI peripherals, but individual bindings may want
> +to define additional, device-specific properties.
> +
> +Required properties:
> +- reg: The virtual channel number of a DSI peripheral. Must be in the range
> + from 0 to 3.
> +
> +Example
> +-------
> +
> + dsi-host {
> + ...
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + peripheral@0 {
> + compatible = "...";
> + reg = <0>;
> + };
> +
> + ...
> + };
>
In general, this looks good to me as a starter, so we could have support
for DSI bus merged. IMHO we should consider adding some generic bus
properties in future, though.
Anyway, have my
Reviewed-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
Best regards,
Tomasz
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
