On Fri, Nov 8, 2013 at 6:24 AM, Anssi Hannula <anssi.hannula@xxxxxx> wrote: > 18.10.2013 23:41, Alex Deucher kirjoitti: >> Needed by the hda driver to properly set up synchronization >> on the audio side. >> >> Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx> >> --- >> drivers/gpu/drm/radeon/evergreen_hdmi.c | 37 ++++++++++++++++++++++++++++++++ >> drivers/gpu/drm/radeon/evergreend.h | 38 +++++++++++++++++++++++++++++++++ >> 2 files changed, 75 insertions(+) >> >> diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c >> index 5fbe486..abdc893 100644 >> --- a/drivers/gpu/drm/radeon/evergreen_hdmi.c >> +++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c > [...] >> + if (connector->latency_present[0]) >> + tmp = VIDEO_LIPSYNC(connector->video_latency[0]) | >> + AUDIO_LIPSYNC(connector->audio_latency[0]); >> + else >> + tmp = VIDEO_LIPSYNC(255) | AUDIO_LIPSYNC(255); >> + } >> + WREG32(AZ_F0_CODEC_PIN0_CONTROL_RESPONSE_LIPSYNC, tmp); > [...] >> +#define AZ_F0_CODEC_PIN0_CONTROL_RESPONSE_LIPSYNC 0x5fe8 >> +# define VIDEO_LIPSYNC(x) (((x) & 0xff) << 0) >> +# define AUDIO_LIPSYNC(x) (((x) & 0xff) << 8) >> +/* VIDEO_LIPSYNC, AUDIO_LIPSYNC >> + * 0 = invalid >> + * x = legal delay value >> + * 255 = sync not supported >> + */ > > Hmm, AMD_HDA_verbs_v2.pdf says that: > 0 = unknown latency > > HDMI spec 1.4 says that: > 0 = not valid or unknown latency > 1..251 = valid delay value > 255 = video not supported / audio not supported > > Are you sure you shouldn't use 0 instead for unknown (no latency_present)? I'm not sure. The comment in the code above is what the register spec says which seems to match the HDMI spec. I can dig around a bit more internally. Alex _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
