[PULL] drm-intel-fixes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Dave,

Bit a bit -fixes pull request in the merge window than usual dua to two
feauture-y things:
- Display CRCs are now enabled on all platforms, including the odd DP case
  on gm45/vlv. Since this is a testing-only feature it should ever hurt,
  but I figured it'll help with regression-testing -fixes. So I left it
  in and didn't postpone it to 3.14.
- Display power well refactoring from Imre. Would have caused major pain
  conflict with the bdw stage 1 patches if I'd postpone this to -next.
  It's only an relatively small interface rework, so shouldn't cause pain.
  It's also been in my tree since almost 3 weeks already.

That accounts for about two thirds of the pull, otherwise just bugfixes:
- vlv backlight fix from Jesse/Jani
- vlv vblank timestamp fix from Jesse
- improved edp detection through vbt from Ville (fixes a vlv issue)
- eDP vdd fix from Paulo
- fixes for dvo lvds on i830M
- a few smaller things all over

Note: This contains a backmerge of v3.12. Since the -internal branch
always applied on top of -nightly I need that unified base to merge bdw
patches. So you'll get a conflict with radeon connector props when pulling
this (and nouveau/master will also conflict a bit when Ben doesn't
rebase). The backmerge itself only had conflicts in drm/i915.

There's also a tiny conflict between Jani's backlight fix and your sysfs
lifetime fix in drm-next.

I plan to send you the bdw pull request tomorrow.

Cheers, Daniel


The following changes since commit 6da7f10d296f4ac625f96b39eef22c41398727e3:

  drm/i915/dp: don't mention eDP bpp clamping if it doesn't affect bpp (2013-10-18 16:00:06 +0200)

are available in the git repository at:

  git://people.freedesktop.org/~danvet/drm-intel tags/drm-intel-fixes-2013-11-07

for you to fetch changes up to 07bf139b906013ecef0c5e0441564d1ae10e974a:

  drm/i915/vlv: use per-pipe backlight controls v2 (2013-11-06 18:26:31 +0100)

----------------------------------------------------------------

Ben Widawsky (4):
      drm/i915: Print RC6 info less often
      drm/i915: Convert straggling MCHBAR registers
      drm/i915: Remove WaFbcDisableDpfcClockGating on IVB
      drm/i915: Remove WaFbcDisableDpfcClockGating on HSW

Chon Ming Lee (1):
      drm/i915/vlv: Fix typo in the DPIO register define.

Chris Wilson (2):
      drm/i915: Whitespace alignment fix for block header in display error state
      drm/i915: Capture batchbuffer state upon GPU hang

Damien Lespiau (1):
      drm/i915: Use a spin lock to protect the pipe crc struct

Daniel Vetter (20):
      drm/i915: Adjust CRC capture for pre-gen5/vlv
      drm/i915: CRC source selection #defines for gmch/vlv chips
      drm/i915: Wire up CRC interrupts for pre-gen5/vlv
      drm/i915: Enable CRC interrupts on pre-gen5/vlv
      drm/i915: Fix PIPE_CRC_CTL for vlv
      drm/i915: Add new CRC sources
      drm/i915: Wire up CRC support for gen3/4
      drm/i915: Wire up gen2 CRC support
      drm/i915: Wire up CRC for vlv
      drm/i915: bikeshed the pipe CRC irq functions a bit
      drm/i915: Move the pipe CRC stuff to other pipe data
      drm/i915: handle faked missed interrupts as simulated hangs, too
      drm/i915: use enum pipe consistently in i915_irq.c
      drm/i915: refactor ilk display interrupt handling
      drm/i916: add "auto" pipe CRC source
      drm/i915: scramble reset support for DP port CRC on g4x
      drm/i915: scramble reset support for DP port CRC on vlv
      drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv
      Merge tag 'v3.12' into drm-intel-next
      drm/i915/dvo: call ->mode_set callback only when the port is running

Imre Deak (10):
      drm/i915: make the intel_display_power_domain enum compact
      drm/i915: factor out is_always_on_domain
      drm/i915: change power_well->lock to be mutex
      drm/i915: factor out modeset_update_power_wells
      drm/i915: enable only the needed power domains during modeset
      drm/i915: prepare for multiple power wells
      drm/i915: use power get/put instead of set for power on after init
      drm/i915: remove device field from struct power_well
      drm/i915: rename i915_init_power_well to init_power_domains_init
      drm/i915: add back checking for i915_disable_power_well

Jani Nikula (1):
      drm/i915: move opregion asle request handling to a work queue

Jesse Barnes (3):
      drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV
      drm/i915: make backlight functions take a connector
      drm/i915/vlv: use per-pipe backlight controls v2

Mengdong Lin (1):
      drm/i915/vlv: enable HDA display audio for Valleyview2

Paulo Zanoni (5):
      drm/i915: fix open-coded DIV_ROUND_UP
      drm/i915: turn the eDP VDD on for any i2c transactions
      drm/i915: reduce eDP VDD message verbose
      drm/i915: use the correct register when turning VDD off
      drm/i915: avoid unclaimed registers when capturing the error state

Ville Syrjälä (3):
      drm/i915: Clamp cursor coordinates to int16_t range
      drm/i915: Give names to the VBT child device type bits
      drm/i915: Make intel_dp_is_edp() less specific

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux