[RFC 07/12] drm: exynos: hdmi: use hdmiphy as PHY

[Tomasz Stanislawski <t.stanislaws@xxxxxxxxxxx>]

The HDMIPHY (physical interface) is controlled by a single
bit in a power controller's regiter. It was implemented
as clock. It was a simple but effective hack.

This patch makes HDMI driver to control HDMIPHY via PHY interface.

Signed-off-by: Tomasz Stanislawski <t.stanislaws@xxxxxxxxxxx>
---
 drivers/gpu/drm/exynos/exynos_hdmi.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
index fcfa23a..e36588a 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
@@ -34,6 +34,7 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
+#include <linux/phy/phy.h>
 
 #include <drm/exynos_drm.h>
 
@@ -82,7 +83,7 @@ struct hdmi_resources {
 	struct clk			*sclk_hdmi;
 	struct clk			*sclk_pixel;
 	struct clk			*sclk_hdmiphy;
-	struct clk			*hdmiphy;
+	struct phy			*hdmiphy;
 	struct regulator_bulk_data	*regul_bulk;
 	int				regul_count;
 };
@@ -1685,7 +1686,7 @@ static void hdmi_poweron(struct hdmi_context *hdata)
 	if (regulator_bulk_enable(res->regul_count, res->regul_bulk))
 		DRM_DEBUG_KMS("failed to enable regulator bulk\n");
 
-	clk_prepare_enable(res->hdmiphy);
+	phy_power_on(res->hdmiphy);
 	clk_prepare_enable(res->hdmi);
 	clk_prepare_enable(res->sclk_hdmi);
 
@@ -1710,7 +1711,7 @@ static void hdmi_poweroff(struct hdmi_context *hdata)
 
 	clk_disable_unprepare(res->sclk_hdmi);
 	clk_disable_unprepare(res->hdmi);
-	clk_disable_unprepare(res->hdmiphy);
+	phy_power_off(res->hdmiphy);
 	regulator_bulk_disable(res->regul_count, res->regul_bulk);
 
 	mutex_lock(&hdata->hdmi_mutex);
@@ -1809,9 +1810,9 @@ static int hdmi_resources_init(struct hdmi_context *hdata)
 		DRM_ERROR("failed to get clock 'sclk_hdmiphy'\n");
 		goto fail;
 	}
-	res->hdmiphy = devm_clk_get(dev, "hdmiphy");
+	res->hdmiphy = devm_phy_get(dev, "hdmiphy");
 	if (IS_ERR(res->hdmiphy)) {
-		DRM_ERROR("failed to get clock 'hdmiphy'\n");
+		DRM_ERROR("failed to get phy 'hdmiphy'\n");
 		goto fail;
 	}
 
-- 
1.7.9.5

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel