On Thu, May 4, 2023 at 10:34 PM Roman Beranek <me@xxxxxxx> wrote:
>
> TCON0's source clock can be fed from either PLL_MIPI, or PLL_VIDEO0(2X),
> however MIPI DSI output only seems to work when PLL_MIPI is selected and
> thus the choice must be hardcoded in.
>
> Currently, this driver can't propagate rate change from N-K-M clocks
> (such as PLL_MIPI) upwards. This prevents PLL_VIDEO0 from participating
> in setting of the TCON0 data clock rate, limiting the precision with
> which a target pixel clock can be matched.
>
> For outputs with fixed TCON0 divider, that is DSI and LVDS, the dotclock
> can deviate up to 8% off target.
Hi Roman,
I'm a bit late, but this patch breaks the LCD on Pine64 Pinebook. When
TCON0 parent is pll-mipi, the panel is blank and I get vblank timeouts.
With this patch reverted it works if I force pll-video-2x as a parent for TCON0.
So for me RGB output doesn't seem to work with PLL_MIPI, but works
only with PLL_VIDEO0_2X. Any ideas on how to fix it?
Regards,
Vasily
> Signed-off-by: Roman Beranek <me@xxxxxxx>
> ---
> drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 14 +++++++++++++-
> 1 file changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> index 41519185600a..eb36f8f77d55 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> @@ -528,11 +528,18 @@ static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
> 0x104, 0, 4, 24, 3, BIT(31),
> CLK_SET_RATE_PARENT);
>
> +/*
> + * DSI output seems to work only when PLL_MIPI selected. Set it and prevent
> + * the mux from reparenting.
> + */
> +#define SUN50I_A64_TCON0_CLK_REG 0x118
> +
> static const char * const tcon0_parents[] = { "pll-mipi", "pll-video0-2x" };
> static const u8 tcon0_table[] = { 0, 2, };
> static SUNXI_CCU_MUX_TABLE_WITH_GATE(tcon0_clk, "tcon0", tcon0_parents,
> tcon0_table, 0x118, 24, 3, BIT(31),
> - CLK_SET_RATE_PARENT);
> + CLK_SET_RATE_PARENT |
> + CLK_SET_RATE_NO_REPARENT);
>
> static const char * const tcon1_parents[] = { "pll-video0", "pll-video1" };
> static const u8 tcon1_table[] = { 0, 2, };
> @@ -953,6 +960,11 @@ static int sun50i_a64_ccu_probe(struct platform_device *pdev)
>
> writel(0x515, reg + SUN50I_A64_PLL_MIPI_REG);
>
> + /* Set PLL MIPI as parent for TCON0 */
> + val = readl(reg + SUN50I_A64_TCON0_CLK_REG);
> + val &= ~GENMASK(26, 24);
> + writel(val | (0 << 24), reg + SUN50I_A64_TCON0_CLK_REG);
> +
> ret = devm_sunxi_ccu_probe(&pdev->dev, reg, &sun50i_a64_ccu_desc);
> if (ret)
> return ret;
> --
> 2.32.0 (Apple Git-132)
>
>
