In preparation to enable the second HDMI output port found on RK3588
SoC, add the related PHY node. This requires a GRF, hence add the
dependent node as well.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
index 0ce0934ec6b793af45585f67d5312434d80357de..68fa9806164776cef8732bb776e958003779ba28 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
@@ -67,6 +67,11 @@ u2phy1_otg: otg-port {
};
};
+ hdptxphy1_grf: syscon@fd5e4000 {
+ compatible = "rockchip,rk3588-hdptxphy-grf", "syscon";
+ reg = <0x0 0xfd5e4000 0x0 0x100>;
+ };
+
i2s8_8ch: i2s@fddc8000 {
compatible = "rockchip,rk3588-i2s-tdm";
reg = <0x0 0xfddc8000 0x0 0x1000>;
@@ -395,6 +400,22 @@ sata-port@0 {
};
};
+ hdptxphy1: phy@fed70000 {
+ compatible = "rockchip,rk3588-hdptx-phy";
+ reg = <0x0 0xfed70000 0x0 0x2000>;
+ clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX1>;
+ clock-names = "ref", "apb";
+ #phy-cells = <0>;
+ resets = <&cru SRST_HDPTX1>, <&cru SRST_P_HDPTX1>,
+ <&cru SRST_HDPTX1_INIT>, <&cru SRST_HDPTX1_CMN>,
+ <&cru SRST_HDPTX1_LANE>, <&cru SRST_HDPTX1_ROPLL>,
+ <&cru SRST_HDPTX1_LCPLL>;
+ reset-names = "phy", "apb", "init", "cmn", "lane", "ropll",
+ "lcpll";
+ rockchip,grf = <&hdptxphy1_grf>;
+ status = "disabled";
+ };
+
usbdp_phy1: phy@fed90000 {
compatible = "rockchip,rk3588-usbdp-phy";
reg = <0x0 0xfed90000 0x0 0x10000>;
--
2.47.0
