I missed the DT errors from the recent patchset[1] (DT patches in linux-next via Florian, DRM bindings patches on dri-misc-next) as Rob's bot report got spam filtered, so this is a fixup set. Largely it was changes to number of interrupts or clocks in the bindings, so those are now covered. I've fixed up the missing "interrupt-controller" flags for 2711 and 2712 whilst here. I can't get my head around what is meant to happen with ranges: "soc@107c000000: firmware: 'ranges' is a required property" The meaning seems obvious. However if I add it then I get: "firmware: '#address-cells', '#size-cells', 'dma-ranges', 'ranges' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml# There's obviously some other flag I need to set in the bindings, but I can't work it out. We have similar errors for all the Pi platforms for one or more nodes. Please advise and I'll happily fix them all. Thanks Dave [1] https://lore.kernel.org/linux-arm-kernel/20241025-drm-vc4-2712-support-v2-0-35efa83c8fc0@xxxxxxxxxxxxxxx/ Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx> --- Dave Stevenson (7): dtbindings: display: bcm2711-hdmi: Correct bindings for 2712 dtbindings: display: Fix BCM2835 HVS bindings for BCM2712 dt-bindings: gpio: brcmstb: add gpio-line-name arm64: dts: broadcom: Fix device tree warnings for BCM2712 display pipeline arm64: dts: broadcom: Add interrupt-controller flag for intc on BCM2712 arm: dts: broadcom: Add interrupt-controller flag for intc on BCM2711 arm64: dts: broadcom: Fix device tree errors on BCM2712. .../bindings/display/brcm,bcm2711-hdmi.yaml | 44 +++++++++---- .../bindings/display/brcm,bcm2835-hvs.yaml | 77 +++++++++++++++++----- .../bindings/gpio/brcm,brcmstb-gpio.yaml | 2 + arch/arm/boot/dts/broadcom/bcm2711.dtsi | 2 + arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 9 +-- arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 10 +-- 6 files changed, 106 insertions(+), 38 deletions(-) --- base-commit: 8c3f4a248f35817d2f604c0e3df1bccf27590228 change-id: 20241128-dt-bcm2712-fixes-afb0e8a0a476 Best regards, -- Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
