On Tue, 2024-11-19 at 15:08 -0800, Matthew Brost wrote:
> On Tue, Nov 19, 2024 at 05:45:27PM +0100, Thomas Hellström wrote:
> > On Tue, 2024-10-15 at 20:25 -0700, Matthew Brost wrote:
> > > Add functions which migrate to / from VRAM accepting a single DPA
> > > argument (VRAM) and array of dma addresses (SRAM).
> > >
> > > v2:
> > > - Don't unlock job_mutex in error path of xe_migrate_vram
> > >
> > > Signed-off-by: Oak Zeng <oak.zeng@xxxxxxxxx>
> > > Signed-off-by: Matthew Brost <matthew.brost@xxxxxxxxx>
> > > ---
> > > drivers/gpu/drm/xe/xe_migrate.c | 149
> > > ++++++++++++++++++++++++++++++++
> > > drivers/gpu/drm/xe/xe_migrate.h | 10 +++
> > > 2 files changed, 159 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/xe/xe_migrate.c
> > > b/drivers/gpu/drm/xe/xe_migrate.c
> > > index cfd31ae49cc1..d7b6636286ae 100644
> > > --- a/drivers/gpu/drm/xe/xe_migrate.c
> > > +++ b/drivers/gpu/drm/xe/xe_migrate.c
> > > @@ -1542,6 +1542,155 @@ void xe_migrate_wait(struct xe_migrate
> > > *m)
> > > dma_fence_wait(m->fence, false);
> > > }
> > >
> > > +static u32 pte_update_cmd_size(u64 size)
> > > +{
> > > + u32 dword;
> >
> > dwords or num_dword?
> >
>
> num_dword
>
> > > + u64 entries = DIV_ROUND_UP(size, XE_PAGE_SIZE);
> > > +
> > > + XE_WARN_ON(size > MAX_PREEMPTDISABLE_TRANSFER);
> > > + /*
> > > + * MI_STORE_DATA_IMM command is used to update page
> > > table.
> > > Each
> > > + * instruction can update maximumly 0x1ff pte entries.
> > > To
> > > update
> > > + * n (n <= 0x1ff) pte entries, we need:
> > > + * 1 dword for the MI_STORE_DATA_IMM command header
> > > (opcode
> > > etc)
> > > + * 2 dword for the page table's physical location
> > > + * 2*n dword for value of pte to fill (each pte entry is
> > > 2
> > > dwords)
> > > + */
> > > + dword = (1 + 2) * DIV_ROUND_UP(entries, 0x1ff);
> > > + dword += entries * 2;
> > > +
> > > + return dword;
> > > +}
> > > +
> > > +static void build_pt_update_batch_sram(struct xe_migrate *m,
> > > + struct xe_bb *bb, u32
> > > pt_offset,
> > > + dma_addr_t *sram_addr,
> > > u32
> > > size)
> > > +{
> > > + u16 pat_index = tile_to_xe(m->tile)-
> > > >pat.idx[XE_CACHE_WB];
> > > + u32 ptes;
> > > + int i = 0;
> > > +
> > > + ptes = DIV_ROUND_UP(size, XE_PAGE_SIZE);
> > > + while (ptes) {
> > > + u32 chunk = min(0x1ffU, ptes);
> > > +
> > > + bb->cs[bb->len++] = MI_STORE_DATA_IMM |
> > > MI_SDI_NUM_QW(chunk);
> > > + bb->cs[bb->len++] = pt_offset;
> > > + bb->cs[bb->len++] = 0;
> > > +
> > > + pt_offset += chunk * 8;
> > > + ptes -= chunk;
> > > +
> > > + while (chunk--) {
> > > + u64 addr = sram_addr[i++] & PAGE_MASK;
> > > +
> > > + xe_tile_assert(m->tile, addr);
> > > + addr = m->q->vm->pt_ops-
> > > >pte_encode_addr(m-
> > > > tile->xe,
> > > +
> > > addr, pat_index,
> > > +
> > > 0,
> > > false, 0);
> > > + bb->cs[bb->len++] = lower_32_bits(addr);
> > > + bb->cs[bb->len++] = upper_32_bits(addr);
> > > + }
> > > + }
> > > +}
> > > +
> > > +enum xe_migrate_copy_dir {
> > > + XE_MIGRATE_COPY_TO_VRAM,
> > > + XE_MIGRATE_COPY_TO_SRAM,
> > > +};
> > > +
> > > +static struct dma_fence *xe_migrate_vram(struct xe_migrate *m,
> > > + unsigned long npages,
> > > + dma_addr_t *sram_addr,
> > > u64
> > > vram_addr,
> > > + const enum
> > > xe_migrate_copy_dir dir)
> > > +{
> > > + struct xe_gt *gt = m->tile->primary_gt;
> > > + struct xe_device *xe = gt_to_xe(gt);
> > > + struct dma_fence *fence = NULL;
> > > + u32 batch_size = 2;
> > > + u64 src_L0_ofs, dst_L0_ofs;
> > > + u64 round_update_size;
> > > + struct xe_sched_job *job;
> > > + struct xe_bb *bb;
> > > + u32 update_idx, pt_slot = 0;
> > > + int err;
> > > +
> > > + round_update_size = min_t(u64, npages * PAGE_SIZE,
> > > + MAX_PREEMPTDISABLE_TRANSFER);
> >
> > Hm. How does the caller know how many pages were actually migrated?
> >
>
> This is an intermediate between migrate_vma_setup and
> migrate_vma_pages/finalize. The number of pages here is based on mpfn
> returned from migrate_vma_setup. The migration for individual pages
> may
> still be aborted in migrate_vma_pages/finalize. In this case both the
> old and new page have the same data, dso migrate_vma_pages/finalize
> can
> pick either page.
I might be misunderstanding, but I meant if npages is, for example,
which is 16MiB of data, but the above min_t reduces that to 8MiB of
data. How would the caller know?
/Thomas
