Re: i915 deadlock on laptop undock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 7, 2013 at 11:10 PM, Daniel Vetter <daniel@xxxxxxxx> wrote:
> Can you please boot with drm.debug=0xe, reproduce the issue and then
> attach the dmesg. The additional debug spam should shed some light on how
> we managed to get into this peculiar situation ...

Sure, here it is.

Thanks,
  Roland
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.12.0-999-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201310070425 SMP Mon Oct 7 08:27:26 UTC 2013
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.12.0-999-generic root=UUID=677292b2-a7ba-4d9e-8f1a-662c546b62ce ro intel_iommu=igfx_off plymouth:debug splash drm.debug=0xe log_buf_len=8388608 quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb27bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb27c000-0x00000000bb281fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb282000-0x00000000bb35efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb35f000-0x00000000bb370fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb371000-0x00000000bb3f1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb3f2000-0x00000000bb40efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb40f000-0x00000000bb46efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb46f000-0x00000000bb667fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb668000-0x00000000bb6e7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb6e8000-0x00000000bb70efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb70f000-0x00000000bb716fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb717000-0x00000000bb71efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb71f000-0x00000000bb76afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb76b000-0x00000000bb776fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb777000-0x00000000bb779fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bb77a000-0x00000000bb780fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb781000-0x00000000bb781fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bb782000-0x00000000bb78afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb78b000-0x00000000bb78bfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bb78c000-0x00000000bb79efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb79f000-0x00000000bb7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000023bffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: LENOVO 2901CTO/2901CTO, BIOS 6UET68WW (1.48 ) 12/12/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x23c000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-DBFFF uncachable
[    0.000000]   DC000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 disabled
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 100000000 mask F00000000 write-back
[    0.000000]   4 base 200000000 mask FC0000000 write-back
[    0.000000]   5 base 23C000000 mask FFC000000 uncachable
[    0.000000]   6 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 1, base: 0GB, range: 2GB, type WB
[    0.000000] reg 2, base: 2GB, range: 1GB, type WB
[    0.000000] reg 3, base: 4GB, range: 4GB, type WB
[    0.000000] reg 4, base: 8GB, range: 1GB, type WB
[    0.000000] reg 5, base: 9152MB, range: 64MB, type UC
[    0.000000] reg 6, base: 3008MB, range: 64MB, type UC
[    0.000000] total RAM covered: 8064M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3008MB, range: 64MB, type UC
[    0.000000] reg 3, base: 4GB, range: 4GB, type WB
[    0.000000] reg 4, base: 8GB, range: 1GB, type WB
[    0.000000] reg 5, base: 9152MB, range: 64MB, type UC
[    0.000000] e820: update [mem 0xbc000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f68e0-0x000f68ef] mapped at [ffff8800000f68e0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[    0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[    0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x23be00000-0x23bffffff]
[    0.000000]  [mem 0x23be00000-0x23bffffff] page 2M
[    0.000000] BRK [0x01fe8000, 0x01fe8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x238000000-0x23bdfffff]
[    0.000000]  [mem 0x238000000-0x23bdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x237ffffff]
[    0.000000]  [mem 0x200000000-0x237ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbb27bfff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xbb1fffff] page 2M
[    0.000000]  [mem 0xbb200000-0xbb27bfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbb282000-0xbb35efff]
[    0.000000]  [mem 0xbb282000-0xbb35efff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbb40f000-0xbb46efff]
[    0.000000]  [mem 0xbb40f000-0xbb46efff] page 4k
[    0.000000] BRK [0x01fe9000, 0x01fe9fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbb70f000-0xbb716fff]
[    0.000000]  [mem 0xbb70f000-0xbb716fff] page 4k
[    0.000000] BRK [0x01fea000, 0x01feafff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbb71f000-0xbb76afff]
[    0.000000]  [mem 0xbb71f000-0xbb76afff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbb7ff000-0xbb7fffff]
[    0.000000]  [mem 0xbb7ff000-0xbb7fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[    0.000000]  [mem 0x100000000-0x1fbffffff] page 2M
[    0.000000] log_buf_len: 8388608
[    0.000000] early log buf free: 254228(96%)
[    0.000000] RAMDISK: [mem 0x34e32000-0x36710fff]
[    0.000000] ACPI: RSDP 00000000000f68a0 00024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 00000000bb7ef250 0009C (v01 LENOVO TP-6U    00001480  LTP 00000000)
[    0.000000] ACPI: FACP 00000000bb7ef400 000F4 (v04 LENOVO TP-6U    00001480 LNVO 00000001)
[    0.000000] ACPI: DSDT 00000000bb7ef7d1 0F3E0 (v01 LENOVO TP-6U    00001480 MSFT 03000001)
[    0.000000] ACPI: FACS 00000000bb6e7000 00040
[    0.000000] ACPI: SSDT 00000000bb7ef5b4 0021D (v01 LENOVO TP-6U    00001480 MSFT 03000001)
[    0.000000] ACPI: ECDT 00000000bb7febb1 00052 (v01 LENOVO TP-6U    00001480 LNVO 00000001)
[    0.000000] ACPI: APIC 00000000bb7fec03 00084 (v01 LENOVO TP-6U    00001480 LNVO 00000001)
[    0.000000] ACPI: MCFG 00000000bb7fecbf 0003C (v01 LENOVO TP-6U    00001480 LNVO 00000001)
[    0.000000] ACPI: HPET 00000000bb7fecfb 00038 (v01 LENOVO TP-6U    00001480 LNVO 00000001)
[    0.000000] ACPI: ASF! 00000000bb7fedbe 000A4 (v16 LENOVO TP-6U    00001480 PTL  00000001)
[    0.000000] ACPI: SLIC 00000000bb7fee62 00176 (v01 LENOVO TP-6U    00001480  LTP 00000000)
[    0.000000] ACPI: BOOT 00000000bb7fefd8 00028 (v01 LENOVO TP-6U    00001480  LTP 00000001)
[    0.000000] ACPI: SSDT 00000000bb6e591a 0084B (v01 LENOVO TP-6U    00001480 INTL 20050513)
[    0.000000] ACPI: TCPA 00000000bb78b000 00032 (v02    PTL  CRESTLN 06040000      00005A52)
[    0.000000] ACPI: DMAR 00000000bb781000 000B8 (v01 INTEL  CP_DALE  00000001 INTL 00000001)
[    0.000000] ACPI: SSDT 00000000bb779000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20060912)
[    0.000000] ACPI: SSDT 00000000bb778000 00259 (v01  PmRef  Cpu0Tst 00003000 INTL 20060912)
[    0.000000] ACPI: SSDT 00000000bb777000 0049F (v01  PmRef    ApTst 00003000 INTL 20060912)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023bffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x23bffffff]
[    0.000000]   NODE_DATA [mem 0x23b7f4000-0x23b7f8fff]
[    0.000000]  [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880232e00000-ffff88023adfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x23bffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0xbb27bfff]
[    0.000000]   node   0: [mem 0xbb282000-0xbb35efff]
[    0.000000]   node   0: [mem 0xbb40f000-0xbb46efff]
[    0.000000]   node   0: [mem 0xbb70f000-0xbb716fff]
[    0.000000]   node   0: [mem 0xbb71f000-0xbb76afff]
[    0.000000]   node   0: [mem 0xbb7ff000-0xbb7fffff]
[    0.000000]   node   0: [mem 0x100000000-0x1fbffffff]
[    0.000000]   node   0: [mem 0x200000000-0x23bffffff]
[    0.000000] On node 0 totalpages: 2044843
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11921 pages used for memmap
[    0.000000]   DMA32 zone: 762894 pages, LIFO batch:31
[    0.000000]   Normal zone: 20224 pages used for memmap
[    0.000000]   Normal zone: 1277952 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
[    0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb27c000-0xbb281fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb35f000-0xbb370fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb371000-0xbb3f1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb3f2000-0xbb40efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb46f000-0xbb667fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb668000-0xbb6e7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb6e8000-0xbb70efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb717000-0xbb71efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb76b000-0xbb776fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb777000-0xbb779fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb77a000-0xbb780fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb781000-0xbb781fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb782000-0xbb78afff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb78b000-0xbb78bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb78c000-0xbb79efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb79f000-0xbb7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb800000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafefff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023b400000 s86528 r8192 d24064 u524288
[    0.000000] pcpu-alloc: s86528 r8192 d24064 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2012613
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12.0-999-generic root=UUID=677292b2-a7ba-4d9e-8f1a-662c546b62ce ro intel_iommu=igfx_off plymouth:debug splash drm.debug=0xe log_buf_len=8388608 quiet
[    0.000000] Intel-IOMMU: disable GFX device mapping
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7931436K/8179372K available (7561K kernel code, 1122K rwdata, 3484K rodata, 1340K init, 1484K bss, 247936K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-255.
[    0.000000] NR_IRQS:16640 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2660.238 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.47 BogoMIPS (lpj=10640952)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000026] Security Framework initialized
[    0.000046] AppArmor: AppArmor initialized
[    0.000047] Yama: becoming mindful.
[    0.000609] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.002492] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003305] Mount-cache hash table entries: 256
[    0.003493] Initializing cgroup subsys memory
[    0.003504] Initializing cgroup subsys devices
[    0.003506] Initializing cgroup subsys freezer
[    0.003507] Initializing cgroup subsys blkio
[    0.003509] Initializing cgroup subsys perf_event
[    0.003511] Initializing cgroup subsys hugetlb
[    0.003530] CPU: Physical Processor ID: 0
[    0.003531] CPU: Processor Core ID: 0
[    0.003537] mce: CPU supports 9 MCE banks
[    0.003547] CPU0: Thermal monitoring enabled (TM1)
[    0.003557] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.003557] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.003557] tlb_flushall_shift: 6
[    0.003655] Freeing SMP alternatives memory: 28K (ffffffff81e69000 - ffffffff81e70000)
[    0.004759] ACPI: Core revision 20130725
[    0.011221] ACPI: All ACPI Tables successfully acquired
[    0.020869] ftrace: allocating 31014 entries in 122 pages
[    0.035047] dmar: Host address width 36
[    0.035051] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[    0.035057] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
[    0.035059] dmar: DRHD base: 0x000000fed91000 flags: 0x0
[    0.035063] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c0000020230272 ecap 1000
[    0.035064] dmar: DRHD base: 0x000000fed93000 flags: 0x1
[    0.035068] dmar: IOMMU 2: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000
[    0.035069] dmar: RMRR base: 0x000000bb6e9000 end: 0x000000bb6fffff
[    0.035070] dmar: RMRR base: 0x000000bdc00000 end: 0x000000bfffffff
[    0.035694] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.075385] smpboot: CPU0: Intel(R) Core(TM) i5 CPU       M 560  @ 2.67GHz (fam: 06, model: 25, stepping: 05)
[    0.182617] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.182624] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.182626] ... version:                3
[    0.182627] ... bit width:              48
[    0.182628] ... generic registers:      4
[    0.182629] ... value mask:             0000ffffffffffff
[    0.182630] ... max period:             000000007fffffff
[    0.182631] ... fixed-purpose events:   3
[    0.182631] ... event mask:             000000070000000f
[    0.197293] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.184145] smpboot: Booting Node   0, Processors  #   1 #   2 #   3 OK
[    0.223631] Brought up 4 CPUs
[    0.223636] smpboot: Total of 4 processors activated (21281.90 BogoMIPS)
[    0.226351] devtmpfs: initialized
[    0.230763] EVM: security.selinux
[    0.230764] EVM: security.SMACK64
[    0.230765] EVM: security.capability
[    0.230822] PM: Registering ACPI NVS region [mem 0xbb371000-0xbb3f1fff] (528384 bytes)
[    0.230831] PM: Registering ACPI NVS region [mem 0xbb668000-0xbb6e7fff] (524288 bytes)
[    0.230839] PM: Registering ACPI NVS region [mem 0xbb76b000-0xbb776fff] (49152 bytes)
[    0.230841] PM: Registering ACPI NVS region [mem 0xbb77a000-0xbb780fff] (28672 bytes)
[    0.230843] PM: Registering ACPI NVS region [mem 0xbb782000-0xbb78afff] (36864 bytes)
[    0.230844] PM: Registering ACPI NVS region [mem 0xbb78c000-0xbb79efff] (77824 bytes)
[    0.231685] pinctrl core: initialized pinctrl subsystem
[    0.231747] regulator-dummy: no parameters
[    0.231779] RTC time: 15:49:36, date: 10/08/13
[    0.231813] NET: Registered protocol family 16
[    0.231923] cpuidle: using governor ladder
[    0.231925] cpuidle: using governor menu
[    0.231968] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.231971] ACPI: bus type PCI registered
[    0.231973] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.232023] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.232026] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.261675] PCI: Using configuration type 1 for base access
[    0.262531] bio: create slab <bio-0> at 0
[    0.262665] ACPI: Added _OSI(Module Device)
[    0.262667] ACPI: Added _OSI(Processor Device)
[    0.262668] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.262669] ACPI: Added _OSI(Processor Aggregator Device)
[    0.264095] ACPI: EC: EC description table is found, configuring boot EC
[    0.267977] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.343049] ACPI: SSDT 00000000bb71a598 004F3 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
[    0.343392] ACPI: Dynamic OEM Table Load:
[    0.343394] ACPI: SSDT           (null) 004F3 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
[    0.343485] ACPI: SSDT 00000000bb718718 006B2 (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
[    0.343841] ACPI: Dynamic OEM Table Load:
[    0.343843] ACPI: SSDT           (null) 006B2 (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
[    0.350696] ACPI: SSDT 00000000bb719a98 00303 (v01  PmRef    ApIst 00003000 INTL 20060912)
[    0.351076] ACPI: Dynamic OEM Table Load:
[    0.351078] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20060912)
[    0.354586] ACPI: SSDT 00000000bb717d98 00119 (v01  PmRef    ApCst 00003000 INTL 20060912)
[    0.354942] ACPI: Dynamic OEM Table Load:
[    0.354944] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20060912)
[    0.359984] ACPI: Interpreter enabled
[    0.359990] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[    0.359994] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[    0.360005] ACPI: (supports S0 S3 S4 S5)
[    0.360007] ACPI: Using IOAPIC for interrupt routing
[    0.360027] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.360727] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[    0.368105] ACPI: Power Resource [PUBS] (on)
[    0.373586] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.373663] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[    0.373722] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.373797] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    0.373872] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.373946] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[    0.374005] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.374080] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[    0.374116] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[    0.374120] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.374122] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.374162] PCI host bridge to bus 0000:ff
[    0.374165] pci_bus 0000:ff: root bus resource [bus ff]
[    0.374172] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[    0.374213] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[    0.374250] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[    0.374282] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[    0.374314] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[    0.374347] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[    0.374404] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.374554] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    0.374690] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[    0.374692] acpi PNP0A08:00: ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.374783] ACPI: \_SB_.PCI0.WMI1: can't evaluate _ADR (0x5)
[    0.374851] PCI host bridge to bus 0000:00
[    0.374853] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.374855] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.374856] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.374858] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.374859] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.374861] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.374863] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[    0.374868] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    0.374934] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[    0.374944] pci 0000:00:02.0: reg 0x10: [mem 0xf2000000-0xf23fffff 64bit]
[    0.374950] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.374954] pci 0000:00:02.0: reg 0x20: [io  0x1800-0x1807]
[    0.375051] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.375079] pci 0000:00:16.0: reg 0x10: [mem 0xf2727800-0xf272780f 64bit]
[    0.375171] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.375249] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[    0.375273] pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff]
[    0.375285] pci 0000:00:19.0: reg 0x14: [mem 0xf2525000-0xf2525fff]
[    0.375296] pci 0000:00:19.0: reg 0x18: [io  0x1820-0x183f]
[    0.375384] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.375423] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.375459] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.375484] pci 0000:00:1a.0: reg 0x10: [mem 0xf2728000-0xf27283ff]
[    0.375593] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.375633] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.375670] pci 0000:00:1b.0: [8086:3b57] type 00 class 0x040300
[    0.375691] pci 0000:00:1b.0: reg 0x10: [mem 0xf2520000-0xf2523fff 64bit]
[    0.375784] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.375828] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.375859] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.375958] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.375999] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.376030] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    0.376128] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.376168] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.376202] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[    0.376300] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.376341] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.376384] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.376409] pci 0000:00:1d.0: reg 0x10: [mem 0xf2728400-0xf27287ff]
[    0.376516] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.376553] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.376583] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.376702] pci 0000:00:1f.0: [8086:3b0f] type 00 class 0x060100
[    0.376864] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[    0.376890] pci 0000:00:1f.2: reg 0x10: [io  0x1860-0x1867]
[    0.376901] pci 0000:00:1f.2: reg 0x14: [io  0x1814-0x1817]
[    0.376912] pci 0000:00:1f.2: reg 0x18: [io  0x1818-0x181f]
[    0.376923] pci 0000:00:1f.2: reg 0x1c: [io  0x1810-0x1813]
[    0.376934] pci 0000:00:1f.2: reg 0x20: [io  0x1840-0x185f]
[    0.376945] pci 0000:00:1f.2: reg 0x24: [mem 0xf2727000-0xf27277ff]
[    0.377010] pci 0000:00:1f.2: PME# supported from D3hot
[    0.377070] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.377091] pci 0000:00:1f.3: reg 0x10: [mem 0xf2728800-0xf27288ff 64bit]
[    0.377120] pci 0000:00:1f.3: reg 0x20: [io  0x1880-0x189f]
[    0.377202] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    0.377229] pci 0000:00:1f.6: reg 0x10: [mem 0xf2526000-0xf2526fff 64bit]
[    0.377424] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.377531] pci 0000:03:00.0: [8086:0084] type 00 class 0x028000
[    0.377569] pci 0000:03:00.0: reg 0x10: [mem 0xf2400000-0xf2401fff 64bit]
[    0.377755] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.386489] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.386501] pci 0000:00:1c.1:   bridge window [mem 0xf2400000-0xf24fffff]
[    0.387403] acpiphp: Slot [1] registered
[    0.387411] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.387416] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.387421] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.387428] pci 0000:00:1c.3:   bridge window [mem 0xf2800000-0xf28fffff 64bit pref]
[    0.387511] pci 0000:00:1e.0: PCI bridge to [bus 0e] (subtractive decode)
[    0.387524] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.387525] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.387527] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.387528] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.387530] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.387532] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[    0.389064] ACPI: Enabled 3 GPEs in block 00 to 3F
[    0.389075] ACPI: \_SB_.UNCR: notify handler is installed
[    0.389077] ACPI: \_SB_.PCI0: notify handler is installed
[    0.389117] Found 2 acpi root devices
[    0.389173] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.389277] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.389280] vgaarb: loaded
[    0.389281] vgaarb: bridge control possible 0000:00:02.0
[    0.389436] SCSI subsystem initialized
[    0.389493] libata version 3.00 loaded.
[    0.389506] ACPI: bus type USB registered
[    0.389521] usbcore: registered new interface driver usbfs
[    0.389529] usbcore: registered new interface driver hub
[    0.389548] usbcore: registered new device driver usb
[    0.389639] PCI: Using ACPI for IRQ routing
[    0.399504] PCI: pci_cache_line_size set to 64 bytes
[    0.399560] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.399561] e820: reserve RAM buffer [mem 0xbb27c000-0xbbffffff]
[    0.399564] e820: reserve RAM buffer [mem 0xbb35f000-0xbbffffff]
[    0.399566] e820: reserve RAM buffer [mem 0xbb46f000-0xbbffffff]
[    0.399569] e820: reserve RAM buffer [mem 0xbb717000-0xbbffffff]
[    0.399571] e820: reserve RAM buffer [mem 0xbb76b000-0xbbffffff]
[    0.399572] e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
[    0.399658] NetLabel: Initializing
[    0.399660] NetLabel:  domain hash size = 128
[    0.399660] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.399672] NetLabel:  unlabeled traffic allowed by default
[    0.399750] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.399755] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.401782] Switched to clocksource hpet
[    0.406486] AppArmor: AppArmor Filesystem Enabled
[    0.406518] pnp: PnP ACPI init
[    0.406533] ACPI: bus type PNP registered
[    0.407941] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.407944] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.407946] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.407948] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[    0.407950] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[    0.407952] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[    0.407954] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[    0.407956] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.407958] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.407959] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.407961] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.407963] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.407965] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.407968] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.407970] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.407974] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.408272] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.408274] system 00:01: [io  0x1000-0x107f] could not be reserved
[    0.408276] system 00:01: [io  0x1180-0x11ff] has been reserved
[    0.408278] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.408280] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.408282] system 00:01: [io  0x1600-0x1641] has been reserved
[    0.408284] system 00:01: [io  0x1644-0x167f] could not be reserved
[    0.408286] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.408288] system 00:01: [mem 0xfeaff000-0xfeafffff] has been reserved
[    0.408290] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.408292] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.408293] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.408295] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.408297] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.408300] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.408338] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.408347] pnp 00:03: [dma 4]
[    0.408362] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.408380] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.408412] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.408436] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.408460] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.408483] pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[    0.408764] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[    0.409616] pnp: PnP ACPI: found 10 devices
[    0.409618] ACPI: bus type PNP unregistered
[    0.416412] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.416428] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.416434] pci 0000:00:1c.1:   bridge window [mem 0xf2400000-0xf24fffff]
[    0.416445] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.416448] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.416454] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.416459] pci 0000:00:1c.3:   bridge window [mem 0xf2800000-0xf28fffff 64bit pref]
[    0.416466] pci 0000:00:1e.0: PCI bridge to [bus 0e]
[    0.416481] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.416482] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.416484] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.416486] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.416487] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.416489] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[    0.416491] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff]
[    0.416493] pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
[    0.416494] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[    0.416496] pci_bus 0000:05: resource 2 [mem 0xf2800000-0xf28fffff 64bit pref]
[    0.416498] pci_bus 0000:0e: resource 4 [io  0x0000-0x0cf7]
[    0.416500] pci_bus 0000:0e: resource 5 [io  0x0d00-0xffff]
[    0.416501] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
[    0.416503] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.416504] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.416506] pci_bus 0000:0e: resource 9 [mem 0xc0000000-0xfebfffff]
[    0.416539] NET: Registered protocol family 2
[    0.416725] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.416989] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.417175] TCP: Hash tables configured (established 65536 bind 65536)
[    0.417207] TCP: reno registered
[    0.417219] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.417252] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.417345] NET: Registered protocol family 1
[    0.417368] pci 0000:00:02.0: Boot video device
[    0.417663] PCI: CLS 64 bytes, default 64
[    0.417718] Trying to unpack rootfs image as initramfs...
[    0.798503] Freeing initrd memory: 25468K (ffff880034e32000 - ffff880036711000)
[    0.798519] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.798522] software IO TLB [mem 0xb727c000-0xbb27c000] (64MB) mapped at [ffff8800b727c000-ffff8800bb27bfff]
[    0.798579] Simple Boot Flag at 0x35 set to 0x1
[    0.798763] Scanning for low memory corruption every 60 seconds
[    0.799075] Initialise module verification
[    0.799118] audit: initializing netlink socket (disabled)
[    0.799132] type=2000 audit(1381247376.624:1): initialized
[    0.822116] bounce pool size: 64 pages
[    0.822131] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.823310] zbud: loaded
[    0.823445] VFS: Disk quotas dquot_6.5.2
[    0.823476] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.823889] fuse init (API version 7.22)
[    0.823959] msgmni has been set to 15540
[    0.824513] Key type asymmetric registered
[    0.824515] Asymmetric key parser 'x509' registered
[    0.824543] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.824582] io scheduler noop registered
[    0.824583] io scheduler deadline registered (default)
[    0.824606] io scheduler cfq registered
[    0.825027] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.825038] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.825090] intel_idle: MWAIT substates: 0x1120
[    0.825091] intel_idle: v0.4 model 0x25
[    0.825092] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.825807] ACPI: AC Adapter [AC] (on-line)
[    0.825906] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.826240] ACPI: Lid Switch [LID]
[    0.826328] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.826355] ACPI: Sleep Button [SLPB]
[    0.826392] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.826394] ACPI: Power Button [PWRF]
[    0.826471] ACPI: Requesting acpi_cpufreq
[    0.832720] thermal LNXTHERM:00: registered as thermal_zone0
[    0.832725] ACPI: Thermal Zone [THM0] (48 C)
[    0.832770] GHES: HEST is not enabled!
[    0.832954] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.835554] Linux agpgart interface v0.103
[    0.835657] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    0.835742] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    0.836439] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    0.836613] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.838932] brd: module loaded
[    0.839851] loop: module loaded
[    0.840194] libphy: Fixed MDIO Bus: probed
[    0.840256] tun: Universal TUN/TAP device driver, 1.6
[    0.840257] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[    0.840316] PPP generic driver version 2.4.2
[    0.840367] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.840405] ehci-pci: EHCI PCI platform driver
[    0.840514] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.840526] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.840532] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.840548] ehci-pci 0000:00:1a.0: debug port 2
[    0.844495] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.844515] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf2728000
[    0.853881] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.854004] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.854010] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.854014] usb usb1: Product: EHCI Host Controller
[    0.854018] usb usb1: Manufacturer: Linux 3.12.0-999-generic ehci_hcd
[    0.854021] usb usb1: SerialNumber: 0000:00:1a.0
[    0.854295] hub 1-0:1.0: USB hub found
[    0.854310] hub 1-0:1.0: 3 ports detected
[    0.854685] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.854700] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.854710] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.854734] ehci-pci 0000:00:1d.0: debug port 2
[    0.858695] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.858759] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf2728400
[    0.859862] ACPI: Battery Slot [BAT0] (battery present)
[    0.869938] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.870162] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.870168] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.870173] usb usb2: Product: EHCI Host Controller
[    0.870176] usb usb2: Manufacturer: Linux 3.12.0-999-generic ehci_hcd
[    0.870180] usb usb2: SerialNumber: 0000:00:1d.0
[    0.870457] hub 2-0:1.0: USB hub found
[    0.870555] hub 2-0:1.0: 3 ports detected
[    0.871000] ehci-platform: EHCI generic platform driver
[    0.871016] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.871019] ohci-platform: OHCI generic platform driver
[    0.871033] uhci_hcd: USB Universal Host Controller Interface driver
[    0.871090] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.874254] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.874263] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.874484] mousedev: PS/2 mouse device common for all mice
[    0.874913] rtc_cmos 00:06: RTC can wake from S4
[    0.875154] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.875196] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.875318] device-mapper: uevent: version 1.0.3
[    0.875448] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@xxxxxxxxxx
[    0.875459] ledtrig-cpu: registered to indicate activity on CPUs
[    0.875693] ashmem: initialized
[    0.875955] TCP: cubic registered
[    0.876026] NET: Registered protocol family 10
[    0.876192] NET: Registered protocol family 17
[    0.876202] Key type dns_resolver registered
[    0.876467] PM: Hibernation image not present or could not be loaded.
[    0.876472] Loading module verification certificates
[    0.877251] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 152f87fa785c0f1282e40c107488986d89442e1e'
[    0.877266] registered taskstats version 1
[    0.878410] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.880526] Key type trusted registered
[    0.883857] Key type encrypted registered
[    0.887239] AppArmor: AppArmor sha1 policy hashing enabled
[    0.887679]   Magic number: 1:5:841
[    0.887858] rtc_cmos 00:06: setting system clock to 2013-10-08 15:49:37 UTC (1381247377)
[    0.893339] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.893340] EDD information not available.
[    0.894556] Freeing unused kernel memory: 1340K (ffffffff81d1a000 - ffffffff81e69000)
[    0.894559] Write protecting the kernel read-only data: 12288k
[    0.895863] Freeing unused kernel memory: 620K (ffff880001765000 - ffff880001800000)
[    0.897023] Freeing unused kernel memory: 612K (ffff880001b67000 - ffff880001c00000)
[    0.910501] systemd-udevd[118]: starting version 204
[    0.922592] wmi: Mapper loaded
[    0.931901] pps_core: LinuxPPS API ver. 1 registered
[    0.931904] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[    0.932979] PTP clock support registered
[    0.935927] ahci 0000:00:1f.2: version 3.0
[    0.936097] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    0.936139] ahci: SSS flag set, parallel bus scan disabled
[    0.936194] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[    0.936198] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    0.936205] ahci 0000:00:1f.2: setting latency timer to 64
[    0.937981] [drm] Initialized drm 1.1.0 20060810
[    0.938445] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    0.938447] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    0.958352] scsi0 : ahci
[    0.958588] scsi1 : ahci
[    0.958709] scsi2 : ahci
[    0.958801] scsi3 : ahci
[    0.958997] scsi4 : ahci
[    0.959085] scsi5 : ahci
[    0.959135] ata1: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727100 irq 40
[    0.959142] ata2: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727180 irq 40
[    0.959143] ata3: DUMMY
[    0.959145] ata4: DUMMY
[    0.959149] ata5: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727300 irq 40
[    0.959152] ata6: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727380 irq 40
[    0.959327] e1000e 0000:00:19.0: setting latency timer to 64
[    0.959417] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.959445] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    1.144151] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:1c:44:e2
[    1.144155] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.144230] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[    1.144692] [drm:i915_dump_device_info], i915 device info: gen=5, pciid=0x0046 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_bsd_ring,
[    1.145014] [drm] Memory usable by graphics device = 2048M
[    1.145017] [drm:i915_gem_gtt_init], GMADR size = 256M
[    1.145018] [drm:i915_gem_gtt_init], GTT stolen size = 32M
[    1.145023] i915 0000:00:02.0: setting latency timer to 64
[    1.165934] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.175705] [drm:intel_detect_pch], Found Ibex Peak PCH
[    1.178029] [drm:intel_opregion_setup], graphic opregion physical addr: 0xbb77e018
[    1.178041] [drm:intel_opregion_setup], Public ACPI methods supported
[    1.178043] [drm:intel_opregion_setup], SWSCI supported
[    1.178045] [drm:intel_opregion_setup], ASLE supported
[    1.178100] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[    1.178110] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    1.178111] [drm] Driver supports precise vblank timestamp query.
[    1.178113] [drm:init_vbt_defaults], Set default to SSC at 100MHz
[    1.178115] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT IRONLAKE-MOBILEd
[    1.178117] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120 display_clock_mode 1 fdi_rx_polarity_inverted 0
[    1.178118] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[    1.178122] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[    1.178123] [drm:drm_mode_debug_printmodeline], Modeline 0:"1440x900" 0 106890 1440 1488 1520 1924 900 903 909 926 0x8 0xa
[    1.178126] [drm:parse_lfp_panel_data], VBT initial LVDS value 30033c
[    1.178128] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[    1.178129] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[    1.178131] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[    1.178420] [drm:intel_dsm_pci_probe], failed to get supported _DSM functions
[    1.178426] [drm:i915_gem_init_stolen], found 33554432 bytes of stolen memory at be000000
[    1.178464] [drm:intel_print_wm_latency], Primary WM0 latency 7 (0.7 usec)
[    1.178466] [drm:intel_print_wm_latency], Primary WM1 latency 10 (5.0 usec)
[    1.178467] [drm:intel_print_wm_latency], Primary WM2 latency 34 (17.0 usec)
[    1.178469] [drm:intel_print_wm_latency], Sprite WM0 latency 13 (1.3 usec)
[    1.178470] [drm:intel_print_wm_latency], Sprite WM1 latency 10 (5.0 usec)
[    1.178471] [drm:intel_print_wm_latency], Sprite WM2 latency 34 (17.0 usec)
[    1.178473] [drm:intel_print_wm_latency], Cursor WM0 latency 13 (1.3 usec)
[    1.178474] [drm:intel_print_wm_latency], Cursor WM1 latency 10 (5.0 usec)
[    1.178475] [drm:intel_print_wm_latency], Cursor WM2 latency 34 (17.0 usec)
[    1.178478] [drm:intel_modeset_init], 2 display pipes available.
[    1.178489] [drm:intel_shared_dpll_init], 2 shared PLLs initialized
[    1.191690] [drm:intel_lvds_init], using preferred mode from EDID: 
[    1.191695] [drm:drm_mode_debug_printmodeline], Modeline 10:"1440x900" 60 106890 1440 1488 1520 1924 900 903 909 926 0x48 0xa
[    1.191707] [drm:intel_lvds_init], detected dual-link lvds configuration
[    1.191777] [drm:intel_panel_get_backlight], get backlight PWM = 0
[    1.191780] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
[    1.191826] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
[    1.205901] [drm:intel_sdvo_read_byte], i2c transfer returned -6
[    1.205903] [drm:intel_sdvo_init], No SDVO device found on SDVOB
[    1.205926] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0
[    1.205957] [drm:intel_dp_init_connector], Adding DP connector on port B
[    1.205977] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
[    1.208477] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[    1.208488] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[    1.210973] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[    1.210983] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[    1.211065] [drm:intel_dp_init_connector], Adding DP connector on port C
[    1.211088] [drm:intel_dp_i2c_init], i2c_init DPDDC-C
[    1.213577] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[    1.213589] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[    1.216085] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145003f
[    1.216094] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[    1.216130] [drm:intel_dp_init_connector], Adding DP connector on port D
[    1.216154] [drm:intel_dp_i2c_init], i2c_init DPDDC-D
[    1.217091] [drm:ironlake_init_pch_refclk], has_panel 1 has_lvds 1 has_ck505 1
[    1.217095] [drm:ironlake_init_pch_refclk], Using SSC on panel
[    1.217502] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7ffff000]
[    1.220810] [drm:init_status_page], render ring hws offset: 0x00001000
[    1.220812] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
[    1.220815] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
[    1.220857] [drm:init_pipe_control], render ring pipe control offset: 0x00024000
[    1.220862] [drm:init_status_page], bsd ring hws offset: 0x00025000
[    1.220864] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
[    1.220866] [drm:i915_pages_create_for_stolen], offset=0x20000, size=131072
[    1.220901] [drm:i915_gem_context_init], Disabling HW Contexts; old hardware
[    1.220920] [drm:ironlake_enable_drps], fmax: 0, fmin: 10, fstart: 8
[    1.222003] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
[    1.222005] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
[    1.222013] [drm:intel_modeset_readout_hw_state], PCH DPLL A hw state readout: refcount 1, on 1
[    1.222021] [drm:intel_modeset_readout_hw_state], PCH DPLL B hw state readout: refcount 0, on 0
[    1.222024] [drm:intel_modeset_readout_hw_state], [ENCODER:8:LVDS-8] hw state readout: disabled, pipe=0
[    1.222028] [drm:intel_modeset_readout_hw_state], [ENCODER:15:DAC-15] hw state readout: disabled, pipe=0
[    1.222031] [drm:intel_modeset_readout_hw_state], [ENCODER:16:TMDS-16] hw state readout: disabled, pipe=0
[    1.222036] [drm:intel_modeset_readout_hw_state], [ENCODER:20:TMDS-20] hw state readout: disabled, pipe=0
[    1.222038] [drm:intel_modeset_readout_hw_state], [ENCODER:22:TMDS-22] hw state readout: disabled, pipe=0
[    1.222041] [drm:intel_modeset_readout_hw_state], [ENCODER:24:TMDS-24] hw state readout: disabled, pipe=0
[    1.222044] [drm:intel_modeset_readout_hw_state], [ENCODER:26:TMDS-26] hw state readout: disabled, pipe=0
[    1.222049] [drm:intel_modeset_readout_hw_state], [ENCODER:28:TMDS-28] hw state readout: enabled, pipe=0
[    1.222057] [drm:intel_modeset_readout_hw_state], [CONNECTOR:7:LVDS-1] hw state readout: disabled
[    1.222059] [drm:intel_modeset_readout_hw_state], [CONNECTOR:14:VGA-1] hw state readout: disabled
[    1.222063] [drm:intel_modeset_readout_hw_state], [CONNECTOR:17:HDMI-A-1] hw state readout: disabled
[    1.222066] [drm:intel_modeset_readout_hw_state], [CONNECTOR:21:DP-1] hw state readout: disabled
[    1.222068] [drm:intel_modeset_readout_hw_state], [CONNECTOR:23:HDMI-A-2] hw state readout: disabled
[    1.222071] [drm:intel_modeset_readout_hw_state], [CONNECTOR:25:HDMI-A-3] hw state readout: disabled
[    1.222073] [drm:intel_modeset_readout_hw_state], [CONNECTOR:27:DP-2] hw state readout: disabled
[    1.222076] [drm:intel_modeset_readout_hw_state], [CONNECTOR:29:DP-3] hw state readout: enabled
[    1.222080] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[    1.222081] [drm:intel_dump_pipe_config], cpu_transcoder: A
[    1.222082] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[    1.222084] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 4, gmch_m: 5627357, gmch_n: 8388608, link_m: 468946, link_n: 524288, tu: 64
[    1.222086] [drm:intel_dump_pipe_config], requested mode:
[    1.222087] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
[    1.222089] [drm:intel_dump_pipe_config], adjusted mode:
[    1.222090] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 241499 0 0 0 0 0 0 0 0 0x0 0x9
[    1.222092] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    1.222093] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x0a0005a0, enabled
[    1.222095] [drm:intel_dump_pipe_config], ips: 0
[    1.222098] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
[    1.222099] [drm:intel_dump_pipe_config], cpu_transcoder: B
[    1.222100] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[    1.222102] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.222103] [drm:intel_dump_pipe_config], requested mode:
[    1.222105] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    1.222106] [drm:intel_dump_pipe_config], adjusted mode:
[    1.222108] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    1.222109] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    1.222111] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    1.222112] [drm:intel_dump_pipe_config], ips: 0
[    1.222133] [drm:intel_connector_check_state], [CONNECTOR:29:DP-3]
[    1.222135] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
[    1.222138] [drm:check_encoder_state], [ENCODER:15:DAC-15]
[    1.222141] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
[    1.222143] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
[    1.222146] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
[    1.222149] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
[    1.222151] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
[    1.222154] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
[    1.222156] [drm:check_crtc_state], [CRTC:3]
[    1.222186] [drm:check_crtc_state], [CRTC:5]
[    1.222190] [drm:check_shared_dpll_state], PCH DPLL A
[    1.222198] [drm:check_shared_dpll_state], PCH DPLL B
[    1.222211] [drm:intel_crt_reset], pch crt adpa set to 0xf40000
[    1.222223] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[    1.222225] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1]
[    1.222233] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[    1.222235] [drm:drm_mode_debug_printmodeline], Modeline 10:"1440x900" 60 106890 1440 1488 1520 1924 900 903 909 926 0x48 0xa
[    1.222237] [drm:drm_mode_debug_printmodeline], Modeline 11:"1440x900" 50 89260 1440 1488 1520 1740 900 903 909 1026 0x40 0xa
[    1.222240] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[    1.222241] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1
[    1.222245] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
[    1.237957] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[    1.237962] [drm:intel_crt_detect], CRT not detected via hotplug
[    1.238188] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[    1.238195] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    1.238198] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    1.238200] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[    1.238582] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    1.238583] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[    1.238584] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[    1.238586] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[    1.238588] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[    1.238590] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1]
[    1.281986] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.282505] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.282511] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.282515] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.282902] ata1.00: ATA-7: INTEL SSDSA1M160G2LE, 2CV102L0, max UDMA/133
[    1.282908] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.283484] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.283487] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.283489] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.283938] ata1.00: configured for UDMA/133
[    1.284331] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSA1M160 2CV1 PQ: 0 ANSI: 5
[    1.284561] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.284579] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.284695] sd 0:0:0:0: [sda] Write Protect is off
[    1.284698] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.284886] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.286150]  sda: sda1 sda2 < sda5 >
[    1.287408] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.293992] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[    1.298270] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    1.298272] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.298556] hub 1-1:1.0: USB hub found
[    1.298607] hub 1-1:1.0: 6 ports detected
[    1.309902] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[    1.309905] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[    1.309908] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[    1.309910] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[    1.309913] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[    1.309915] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[    1.309916] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
[    1.310187] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    1.310195] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[    1.310200] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[    1.310204] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[    1.310208] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-3]
[    1.310446] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[    1.310454] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[    1.310459] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[    1.310463] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[    1.310467] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[    1.310472] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[    1.310475] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[    1.310478] [drm:intel_dp_detect], [CONNECTOR:29:DP-3]
[    1.310826] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 00 02 02 06 00 00 00 00
[    1.311817] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    1.334351] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    1.357204] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    1.357207] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[    1.358037] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    1.380906] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    1.403588] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    1.403635] [drm:drm_edid_to_eld], ELD monitor SMS27A850
[    1.403637] [drm:drm_edid_to_eld], ELD size 8, SAD count 1
[    1.403648] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] probed modes :
[    1.403650] [drm:drm_mode_debug_printmodeline], Modeline 31:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0x9
[    1.403653] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[    1.403656] [drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[    1.403659] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[    1.403662] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[    1.403665] [drm:drm_mode_debug_printmodeline], Modeline 32:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[    1.403668] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[    1.403671] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[    1.403674] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    1.403677] [drm:drm_mode_debug_printmodeline], Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[    1.403680] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[    1.403683] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[    1.403686] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    1.403689] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[    1.403692] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[    1.403695] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[    1.403698] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[    1.403701] [drm:drm_mode_debug_printmodeline], Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    1.403704] [drm:drm_mode_debug_printmodeline], Modeline 51:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[    1.403707] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[    1.403710] [drm:drm_setup_crtcs], 
[    1.403713] [drm:drm_enable_connectors], connector 7 enabled? yes
[    1.403714] [drm:drm_enable_connectors], connector 14 enabled? no
[    1.403716] [drm:drm_enable_connectors], connector 17 enabled? no
[    1.403718] [drm:drm_enable_connectors], connector 21 enabled? no
[    1.403719] [drm:drm_enable_connectors], connector 23 enabled? no
[    1.403721] [drm:drm_enable_connectors], connector 25 enabled? no
[    1.403723] [drm:drm_enable_connectors], connector 27 enabled? no
[    1.403724] [drm:drm_enable_connectors], connector 29 enabled? yes
[    1.403727] [drm:drm_target_preferred], looking for cmdline mode on connector 7
[    1.403728] [drm:drm_target_preferred], looking for preferred mode on connector 7
[    1.403730] [drm:drm_target_preferred], found mode 1440x900
[    1.403732] [drm:drm_target_preferred], looking for cmdline mode on connector 29
[    1.403733] [drm:drm_target_preferred], looking for preferred mode on connector 29
[    1.403735] [drm:drm_target_preferred], found mode 2560x1440
[    1.403736] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[    1.403740] [drm:drm_setup_crtcs], desired mode 1440x900 set on crtc 3
[    1.403742] [drm:drm_setup_crtcs], desired mode 2560x1440 set on crtc 5
[    1.403746] [drm:i915_gem_object_create_stolen], creating stolen object: size=e10000
[    1.403751] [drm:i915_pages_create_for_stolen], offset=0x40000, size=14745600
[    1.409564] [drm:intelfb_create], allocated 2560x1440 fb: 0x00047000, bo ffff88022a1b6000
[    1.409629] fbcon: inteldrmfb (fb0) is primary device
[    1.409922] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.410162] [drm:intel_crtc_set_config], [CRTC:3] [FB:53] #connectors=1 (x y) (0 0)
[    1.410165] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[    1.410166] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[    1.410168] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    1.410170] [drm:drm_mode_debug_printmodeline], Modeline 50:"1440x900" 60 106890 1440 1488 1520 1924 900 903 909 926 0x48 0xa
[    1.410171] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
[    1.410172] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[    1.410173] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [NOCRTC]
[    1.410174] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[    1.410175] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    1.410176] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[    1.410177] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[    1.410179] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    1.410181] [drm:connected_sink_compute_bpp], [CONNECTOR:7:LVDS-1] checking for sink bpp constrains
[    1.410184] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
[    1.410187] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe A, lanes 1
[    1.410188] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
[    1.410189] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[    1.410190] [drm:intel_dump_pipe_config], cpu_transcoder: A
[    1.410190] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[    1.410192] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 1, gmch_m: 3736076, gmch_n: 4194304, link_m: 207559, link_n: 524288, tu: 64
[    1.410192] [drm:intel_dump_pipe_config], requested mode:
[    1.410194] [drm:drm_mode_debug_printmodeline], Modeline 0:"1440x900" 60 106890 1440 1488 1520 1924 900 903 909 926 0x48 0xa
[    1.410195] [drm:intel_dump_pipe_config], adjusted mode:
[    1.410196] [drm:drm_mode_debug_printmodeline], Modeline 0:"1440x900" 60 106890 1440 1488 1520 1924 900 903 909 926 0x48 0xa
[    1.410197] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    1.410198] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    1.410199] [drm:intel_dump_pipe_config], ips: 0
[    1.410382] [drm:intel_dp_link_down], 
[    1.418382] [drm:ibx_irq_handler], PCH transcoder A FIFO underrun
[    1.533907] ------------[ cut here ]------------
[    1.533936] WARNING: CPU: 2 PID: 121 at /home/apw/COD/linux/drivers/gpu/drm/i915/intel_display.c:844 intel_wait_for_pipe_off+0x1e1/0x1f0 [i915]()
[    1.533936] pipe_off wait timed out
[    1.533943] Modules linked in: mxm_wmi i915(+) i2c_algo_bit drm_kms_helper e1000e drm ahci libahci ptp pps_core video wmi
[    1.533946] CPU: 2 PID: 121 Comm: systemd-udevd Not tainted 3.12.0-999-generic #201310070425
[    1.533947] Hardware name: LENOVO 2901CTO/2901CTO, BIOS 6UET68WW (1.48 ) 12/12/2011
[    1.533949]  000000000000034c ffff880036069448 ffffffff817478f3 0000000000000082
[    1.533951]  ffff880036069498 ffff880036069488 ffffffff8106759c ffff88022fa3c000
[    1.533953]  ffff88022a13c000 0000000000070008 00000000fffedc5b ffff880036069fd8
[    1.533953] Call Trace:
[    1.533961]  [<ffffffff817478f3>] dump_stack+0x46/0x58
[    1.533966]  [<ffffffff8106759c>] warn_slowpath_common+0x8c/0xc0
[    1.533968]  [<ffffffff81067686>] warn_slowpath_fmt+0x46/0x50
[    1.533983]  [<ffffffffa012c1d1>] intel_wait_for_pipe_off+0x1e1/0x1f0 [i915]
[    1.533998]  [<ffffffffa012c293>] intel_disable_pipe+0xb3/0xc0 [i915]
[    1.534012]  [<ffffffffa012ec02>] ironlake_crtc_disable+0xd2/0x2a0 [i915]
[    1.534027]  [<ffffffffa01319b8>] __intel_set_mode+0x168/0x370 [i915]
[    1.534042]  [<ffffffffa0133816>] intel_set_mode+0x16/0x30 [i915]
[    1.534057]  [<ffffffffa0133acd>] intel_crtc_set_config+0x29d/0x310 [i915]
[    1.534062]  [<ffffffff814716a9>] ? set_inverse_transl+0x109/0x150
[    1.534074]  [<ffffffffa00525dc>] drm_mode_set_config_internal+0x5c/0xe0 [drm]
[    1.534078]  [<ffffffffa008f496>] drm_fb_helper_set_par+0x66/0xe0 [drm_kms_helper]
[    1.534081]  [<ffffffff813f364c>] fbcon_init+0x52c/0x5b0
[    1.534082]  [<ffffffff814727ec>] visual_init+0xbc/0x120
[    1.534084]  [<ffffffff8147549a>] do_bind_con_driver+0x16a/0x320
[    1.534086]  [<ffffffff81475801>] do_take_over_console+0x61/0x70
[    1.534089]  [<ffffffff813f179b>] do_fbcon_takeover+0x5b/0xb0
[    1.534090]  [<ffffffff813f6535>] fbcon_event_notify+0x3c5/0x3f0
[    1.534093]  [<ffffffff817596ad>] notifier_call_chain+0x4d/0x70
[    1.534096]  [<ffffffff81091ea8>] __blocking_notifier_call_chain+0x58/0x80
[    1.534098]  [<ffffffff81091ee6>] blocking_notifier_call_chain+0x16/0x20
[    1.534099]  [<ffffffff813e657b>] fb_notifier_call_chain+0x1b/0x20
[    1.534101]  [<ffffffff813e8647>] do_register_framebuffer+0x1c7/0x2f0
[    1.534103]  [<ffffffff813e8795>] register_framebuffer+0x25/0x40
[    1.534105]  [<ffffffffa008d977>] drm_fb_helper_single_fb_probe+0x187/0x2f0 [drm_kms_helper]
[    1.534107]  [<ffffffffa008f2e4>] drm_fb_helper_initial_config+0x94/0xd0 [drm_kms_helper]
[    1.534127]  [<ffffffffa0156a11>] intel_fbdev_initial_config+0x21/0x30 [i915]
[    1.534137]  [<ffffffffa00f8a45>] i915_load_modeset_init+0x1e5/0x220 [i915]
[    1.534148]  [<ffffffffa00fb4d8>] i915_driver_load+0x678/0x7a0 [i915]
[    1.534155]  [<ffffffffa004d50d>] drm_get_pci_dev+0x13d/0x310 [drm]
[    1.534166]  [<ffffffffa00f75e6>] i915_pci_probe+0x36/0x70 [i915]
[    1.534169]  [<ffffffff813bb54b>] local_pci_probe+0x4b/0x80
[    1.534171]  [<ffffffff813bce39>] __pci_device_probe+0xd9/0xe0
[    1.534173]  [<ffffffff813bce7a>] pci_device_probe+0x3a/0x60
[    1.534176]  [<ffffffff814a4b0f>] really_probe+0x7f/0x350
[    1.534177]  [<ffffffff814a4f67>] driver_probe_device+0x47/0xa0
[    1.534178]  [<ffffffff814a506b>] __driver_attach+0xab/0xb0
[    1.534180]  [<ffffffff814a4fc0>] ? driver_probe_device+0xa0/0xa0
[    1.534181]  [<ffffffff814a2c8e>] bus_for_each_dev+0x5e/0x90
[    1.534183]  [<ffffffff814a46be>] driver_attach+0x1e/0x20
[    1.534185]  [<ffffffff814a410c>] bus_add_driver+0x10c/0x2c0
[    1.534186]  [<ffffffffa01ac000>] ? 0xffffffffa01abfff
[    1.534188]  [<ffffffff814a5784>] driver_register+0x64/0xf0
[    1.534189]  [<ffffffffa01ac000>] ? 0xffffffffa01abfff
[    1.534191]  [<ffffffff813bbd8c>] __pci_register_driver+0x4c/0x50
[    1.534197]  [<ffffffffa004d7fa>] drm_pci_init+0x11a/0x130 [drm]
[    1.534198]  [<ffffffffa01ac000>] ? 0xffffffffa01abfff
[    1.534208]  [<ffffffffa01ac066>] i915_init+0x66/0x68 [i915]
[    1.534211]  [<ffffffff8100212a>] do_one_initcall+0xfa/0x1b0
[    1.534213]  [<ffffffff81059903>] ? set_memory_nx+0x43/0x50
[    1.534215]  [<ffffffff8173b82a>] do_init_module+0x80/0x1d1
[    1.534219]  [<ffffffff810dcce9>] load_module+0x4c9/0x5f0
[    1.534220]  [<ffffffff810da4c0>] ? add_kallsyms+0x210/0x210
[    1.534222]  [<ffffffff810dcec4>] SyS_init_module+0xb4/0x100
[    1.534224]  [<ffffffff8175e06d>] system_call_fastpath+0x1a/0x1f
[    1.534225] ---[ end trace 3ac87b2b8d6b4553 ]---
[    1.541920] [drm:intel_disable_shared_dpll], disable PCH DPLL A (active 1, on? 1) for crtc 3
[    1.541928] [drm:intel_disable_shared_dpll], disabling PCH DPLL A
[    1.542327] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    1.542329] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.542414] [drm:intel_update_fbc], no output, disabling
[    1.542419] [drm:ironlake_get_refclk], using SSC reference clock of 120 MHz
[    1.542445] [drm:intel_get_shared_dpll], CRTC:3 dropping existing PCH DPLL A
[    1.542447] [drm:intel_get_shared_dpll], CRTC:3 using pre-allocated PCH DPLL A
[    1.542448] [drm:intel_get_shared_dpll], using PCH DPLL A for pipe A
[    1.542449] [drm:intel_get_shared_dpll], setting up PCH DPLL A
[    1.542469] [drm:ironlake_update_plane], Writing base 00047000 00000000 0 0 10240
[    1.542479] [drm:intel_crtc_mode_set], [ENCODER:8:LVDS-8] set [MODE:0:1440x900]
[    1.542481] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[    1.542485] [drm:ironlake_check_srwm], watermark 1: display plane 36, fbc lines 3, cursor 6
[    1.542487] [drm:ironlake_check_srwm], watermark 2: display plane 116, fbc lines 4, cursor 10
[    1.542588] hub 2-1:1.0: USB hub found
[    1.542635] hub 2-1:1.0: 8 ports detected
[    1.602022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.604863] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[    1.605581] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[    1.606013] [drm:ironlake_wait_for_vblank], vblank wait timed out
[    1.607377] ata2.00: ATAPI: MATSHITADVD-RAM UJ892, SB01, max UDMA/100
[    1.611039] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[    1.611890] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[    1.613490] ata2.00: configured for UDMA/100
[    1.614224] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    1.617393] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ892    SB01 PQ: 0 ANSI: 5
[    1.619478] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.619480] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.619736] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.619814] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.670016] [drm:ironlake_wait_for_vblank], vblank wait timed out
[    1.670329] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x700
[    1.670330] [drm:ironlake_fdi_link_train], FDI train 1 done.
[    1.670485] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[    1.670486] [drm:ironlake_fdi_link_train], FDI train 2 done.
[    1.670486] [drm:ironlake_fdi_link_train], FDI train done
[    1.670487] [drm:ironlake_enable_shared_dpll], enable PCH DPLL A (active 0, on? 0)for crtc 3
[    1.670488] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL A
[    1.671854] [drm:intel_update_fbc], disabled per chip default
[    1.678004] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
[    1.678009] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4437
[    1.688586] [drm:ibx_irq_handler], PCH transcoder A FIFO underrun
[    1.693973] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1]
[    1.693991] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
[    1.693995] [drm:check_encoder_state], [ENCODER:15:DAC-15]
[    1.693999] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
[    1.694003] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
[    1.694007] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
[    1.694010] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
[    1.694014] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
[    1.694018] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
[    1.694022] [drm:check_crtc_state], [CRTC:3]
[    1.694044] [drm:check_crtc_state], [CRTC:5]
[    1.694048] [drm:check_shared_dpll_state], PCH DPLL A
[    1.694054] [drm:check_shared_dpll_state], PCH DPLL B
[    1.694062] [drm:intel_crtc_set_config], [CRTC:5] [FB:53] #connectors=1 (x y) (0 0)
[    1.694065] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[    1.694067] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[    1.694071] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    1.694076] [drm:drm_mode_debug_printmodeline], Modeline 52:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0x9
[    1.694078] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=1, fb_changed=0
[    1.694080] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[    1.694082] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    1.694085] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [CRTC:5]
[    1.694087] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[    1.694090] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[    1.694094] [drm:connected_sink_compute_bpp], [CONNECTOR:29:DP-3] checking for sink bpp constrains
[    1.694101] [drm:intel_dp_compute_config], DP link computation with max lane count 4 max bw 0a pixel clock 241500KHz
[    1.694104] [drm:intel_dp_compute_config], DP link bw 0a lane count 4 clock 270000 bpp 24
[    1.694105] [drm:intel_dp_compute_config], DP link bw required 579600 available 864000
[    1.694107] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe B, lanes 3
[    1.694108] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[    1.694109] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
[    1.694109] [drm:intel_dump_pipe_config], cpu_transcoder: B
[    1.694110] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[    1.694111] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 3, gmch_m: 7503143, gmch_n: 8388608, link_m: 468946, link_n: 524288, tu: 64
[    1.694112] [drm:intel_dump_pipe_config], requested mode:
[    1.694113] [drm:drm_mode_debug_printmodeline], Modeline 0:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0x9
[    1.694114] [drm:intel_dump_pipe_config], adjusted mode:
[    1.694115] [drm:drm_mode_debug_printmodeline], Modeline 0:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0x9
[    1.694116] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    1.694117] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    1.694118] [drm:intel_dump_pipe_config], ips: 0
[    1.694136] [drm:intel_get_shared_dpll], CRTC:5 using pre-allocated PCH DPLL B
[    1.694137] [drm:intel_get_shared_dpll], using PCH DPLL B for pipe B
[    1.694138] [drm:intel_get_shared_dpll], setting up PCH DPLL B
[    1.694154] [drm:ironlake_update_plane], Writing base 00047000 00000000 0 0 10240
[    1.694159] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[    1.694162] [drm:ironlake_check_srwm], watermark 1: display plane 36, fbc lines 3, cursor 6
[    1.694163] [drm:ironlake_check_srwm], watermark 2: display plane 116, fbc lines 4, cursor 10
[    1.694165] [drm:intel_crtc_mode_set], [ENCODER:28:TMDS-28] set [MODE:0:2560x1440]
[    1.694168] [drm:intel_dp_mode_set], Enabling DP audio on pipe B
[    1.694169] [drm:intel_write_eld], ELD on [CONNECTOR:29:DP-3], [ENCODER:28:TMDS-28]
[    1.694170] [drm:ironlake_write_eld], ELD on pipe B
[    1.694172] [drm:ironlake_write_eld], Audio directed to unknown port
[    1.694173] [drm:ironlake_write_eld], ELD: DisplayPort detected
[    1.694180] [drm:ironlake_write_eld], ELD size 8
[    1.694186] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[    1.694187] [drm:ironlake_update_wm], FIFO watermarks For pipe B - plane 13, cursor: 6
[    1.707443] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
[    1.707446] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.707449] usb 1-1.3: Product: Biometric Coprocessor
[    1.707451] usb 1-1.3: Manufacturer: UPEK
[    1.758004] [drm:ironlake_wait_for_vblank], vblank wait timed out
[    1.778220] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[    1.798020] tsc: Refined TSC clocksource calibration: 2659.999 MHz
[    1.822015] [drm:ironlake_wait_for_vblank], vblank wait timed out
[    1.822326] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[    1.822327] [drm:ironlake_fdi_link_train], FDI train 1 done.
[    1.822482] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[    1.822483] [drm:ironlake_fdi_link_train], FDI train 2 done.
[    1.822483] [drm:ironlake_fdi_link_train], FDI train done
[    1.822484] [drm:ironlake_enable_shared_dpll], enable PCH DPLL B (active 0, on? 0)for crtc 5
[    1.822485] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL B
[    1.823852] [drm:intel_update_fbc], more than one pipe active, disabling compression
[    1.824276] [drm:ibx_irq_handler], PCH transcoder B FIFO underrun
[    1.824319] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[    1.825004] [drm:intel_dp_start_link_train], clock recovery OK
[    1.825006] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[    1.825989] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
[    1.849951] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1]
[    1.849965] [drm:intel_connector_check_state], [CONNECTOR:29:DP-3]
[    1.849967] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
[    1.849970] [drm:check_encoder_state], [ENCODER:15:DAC-15]
[    1.849972] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
[    1.849975] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
[    1.849977] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
[    1.849980] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
[    1.849982] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
[    1.849985] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
[    1.849987] [drm:check_crtc_state], [CRTC:3]
[    1.850005] [drm:check_crtc_state], [CRTC:5]
[    1.850026] [drm:check_shared_dpll_state], PCH DPLL A
[    1.850032] [drm:check_shared_dpll_state], PCH DPLL B
[    1.850063] [drm:intel_crtc_set_config], [CRTC:3] [FB:53] #connectors=1 (x y) (0 0)
[    1.850065] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    1.850066] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    1.850067] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [CRTC:5]
[    1.850068] [drm:intel_crtc_set_config], [CRTC:5] [FB:53] #connectors=1 (x y) (0 0)
[    1.850069] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[    1.850070] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    1.850071] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [CRTC:5]
[    1.853059] Console: switching to colour frame buffer device 180x56
[    1.853063] [drm:intel_crtc_set_config], [CRTC:3] [FB:53] #connectors=1 (x y) (0 0)
[    1.853064] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    1.853065] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    1.853066] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [CRTC:5]
[    1.853067] [drm:intel_crtc_set_config], [CRTC:5] [FB:53] #connectors=1 (x y) (0 0)
[    1.853068] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[    1.853069] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    1.853070] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [CRTC:5]
[    1.856169] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.856171] i915 0000:00:02.0: registered panic notifier
[    1.856176] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io:owns=io
[    1.862309] [drm:asle_set_backlight], bclp = 0x80000007
[    1.862315] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
[    1.862317] [drm:intel_panel_actually_set_backlight], set backlight PWM = 119
[    1.862320] [drm:asle_set_pwm_freq], PWM freq is not supported
[    1.862760] [drm:asle_set_backlight], bclp = 0x800000ff
[    1.862764] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
[    1.862962] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
[    1.862964] [drm:asle_set_pwm_freq], PWM freq is not supported
[    1.863052] acpi device:02: registered as cooling_device4
[    1.864705] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    1.864749] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    1.864894] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    1.874618] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[    1.874624] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.874628] usb 1-1.4: Product: Broadcom Bluetooth Device
[    1.874632] usb 1-1.4: Manufacturer: Broadcom Corp
[    1.874636] usb 1-1.4: SerialNumber: 5CAC4CCC4555
[    1.938059] ata5: SATA link down (SStatus 0 SControl 300)
[    1.946311] usb 1-1.5: new high-speed USB device number 5 using ehci-pci
[    2.038499] usb 1-1.5: New USB device found, idVendor=17ef, idProduct=100a
[    2.038504] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.038937] hub 1-1.5:1.0: USB hub found
[    2.039100] hub 1-1.5:1.0: 6 ports detected
[    2.110335] usb 1-1.6: new high-speed USB device number 6 using ehci-pci
[    2.208037] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480d
[    2.208043] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.208048] usb 1-1.6: Product: Integrated Camera
[    2.208051] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    2.258069] ata6: SATA link down (SStatus 0 SControl 300)
[    2.278097] usb 2-1.6: new high-speed USB device number 3 using ehci-pci
[    2.376811] usb 2-1.6: New USB device found, idVendor=05e3, idProduct=0715
[    2.376818] usb 2-1.6: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[    2.376822] usb 2-1.6: Product: USB Reader
[    2.376826] usb 2-1.6: Manufacturer: Genesys 
[    2.376829] usb 2-1.6: SerialNumber: 000000009407
[    2.380608] usb-storage 2-1.6:1.0: USB Mass Storage device detected
[    2.380705] scsi6 : usb-storage 2-1.6:1.0
[    2.380766] usbcore: registered new interface driver usb-storage
[    2.450246] usb 1-1.5.4: new full-speed USB device number 7 using ehci-pci
[    2.546263] usb 1-1.5.4: New USB device found, idVendor=046d, idProduct=c52b
[    2.546271] usb 1-1.5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.546277] usb 1-1.5.4: Product: USB Receiver
[    2.546282] usb 1-1.5.4: Manufacturer: Logitech
[    2.551702] hidraw: raw HID events driver (C) Jiri Kosina
[    2.558130] usbcore: registered new interface driver usbhid
[    2.558133] usbhid: USB HID core driver
[    2.561250] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.5.4/input2
[    2.564207] input: Logitech Unifying Device. Wireless PID:1024 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.2/0003:046D:C52B.0003/input/input5
[    2.564348] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:00:1a.0-1.5.4:1
[    2.564800] [drm:intel_crtc_set_config], [CRTC:3] [FB:53] #connectors=1 (x y) (0 0)
[    2.564807] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    2.564810] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    2.564812] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [CRTC:5]
[    2.564815] [drm:intel_crtc_set_config], [CRTC:5] [FB:53] #connectors=1 (x y) (0 0)
[    2.564817] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[    2.564818] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    2.564819] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [CRTC:5]
[    2.566312] input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.2/0003:046D:C52B.0003/input/input6
[    2.566387] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:1a.0-1.5.4:2
[    2.630076] [drm:i915_driver_open], 
[    2.630093] [drm:intel_crtc_cursor_set], cursor off
[    2.630097] [drm:intel_crtc_set_config], [CRTC:3] [FB:53] #connectors=1 (x y) (0 0)
[    2.630103] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    2.630105] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    2.630107] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [CRTC:5]
[    2.630109] [drm:intel_crtc_cursor_set], cursor off
[    2.630111] [drm:intel_crtc_set_config], [CRTC:5] [FB:53] #connectors=1 (x y) (0 0)
[    2.630113] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[    2.630114] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    2.630115] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [CRTC:5]
[    2.630121] [drm:i915_driver_open], 
[    2.630125] [drm:intel_crtc_cursor_set], cursor off
[    2.630126] [drm:intel_crtc_set_config], [CRTC:3] [FB:53] #connectors=1 (x y) (0 0)
[    2.630128] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    2.630130] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    2.630131] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [CRTC:5]
[    2.630132] [drm:intel_crtc_cursor_set], cursor off
[    2.630133] [drm:intel_crtc_set_config], [CRTC:5] [FB:53] #connectors=1 (x y) (0 0)
[    2.630135] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[    2.630136] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    2.630138] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [CRTC:5]
[    2.630142] [drm:i915_driver_open], 
[    2.630215] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
[    2.630217] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
[    2.630221] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[    2.630224] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[    2.630226] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1]
[    2.630238] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[    2.630240] [drm:drm_mode_debug_printmodeline], Modeline 10:"1440x900" 60 106890 1440 1488 1520 1924 900 903 909 926 0x48 0xa
[    2.630243] [drm:drm_mode_debug_printmodeline], Modeline 11:"1440x900" 50 89260 1440 1488 1520 1740 900 903 909 1026 0x40 0xa
[    2.630245] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[    2.633572] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[    2.633581] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[    2.633583] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1
[    2.633588] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[    2.633589] [drm:intel_crt_detect], CRT not detected via hotplug
[    2.633855] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[    2.633864] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    2.633868] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    2.633871] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[    2.634131] usb 1-1.5.6: new high-speed USB device number 8 using ehci-pci
[    2.634337] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    2.634339] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[    2.634341] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[    2.634343] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[    2.634384] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[    2.634387] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[    2.634389] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1
[    2.634392] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[    2.634396] [drm:intel_crt_detect], CRT not detected via hotplug
[    2.634605] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[    2.634611] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    2.634615] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    2.634617] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[    2.634993] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    2.634995] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[    2.634996] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[    2.634997] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[    2.635005] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[    2.635007] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[    2.635009] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1]
[    2.650050] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[    2.650052] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[    2.650055] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[    2.650056] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[    2.650058] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1]
[    2.666034] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[    2.666036] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[    2.666039] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[    2.666041] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[    2.666043] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[    2.666047] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[    2.666048] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[    2.666050] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[    2.666051] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[    2.666054] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[    2.666056] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[    2.666058] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[    2.666059] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
[    2.666298] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    2.666306] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[    2.666310] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[    2.666319] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[    2.666323] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[    2.666326] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
[    2.666603] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    2.666613] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[    2.666617] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[    2.666628] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[    2.666633] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[    2.666636] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-3]
[    2.666850] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[    2.666858] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[    2.666863] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[    2.666871] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[    2.666875] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[    2.666879] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-3]
[    2.667079] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[    2.667085] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[    2.667089] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[    2.667098] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[    2.667102] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[    2.667105] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[    2.667110] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[    2.667114] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[    2.667118] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[    2.667121] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[    2.667126] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[    2.667130] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[    2.667134] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[    2.667140] [drm:intel_dp_detect], [CONNECTOR:29:DP-3]
[    2.667501] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 00 02 02 06 00 00 00 00
[    2.668464] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    2.690818] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    2.713233] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    2.713236] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[    2.714036] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    2.726378] usb 1-1.5.6: New USB device found, idVendor=0451, idProduct=8042
[    2.726381] usb 1-1.5.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.726663] hub 1-1.5.6:1.0: USB hub found
[    2.726747] hub 1-1.5.6:1.0: 4 ports detected
[    2.736307] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    2.758648] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    2.758700] [drm:drm_edid_to_eld], ELD monitor SMS27A850
[    2.758702] [drm:drm_edid_to_eld], ELD size 8, SAD count 1
[    2.758716] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] probed modes :
[    2.758718] [drm:drm_mode_debug_printmodeline], Modeline 31:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0x9
[    2.758722] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[    2.758725] [drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[    2.758728] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[    2.758731] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[    2.758734] [drm:drm_mode_debug_printmodeline], Modeline 32:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[    2.758737] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[    2.758740] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[    2.758743] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    2.758746] [drm:drm_mode_debug_printmodeline], Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[    2.758749] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[    2.758752] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[    2.758755] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    2.758758] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[    2.758761] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[    2.758764] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[    2.758767] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[    2.758770] [drm:drm_mode_debug_printmodeline], Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    2.758773] [drm:drm_mode_debug_printmodeline], Modeline 51:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[    2.758776] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[    2.758784] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[    2.771194] [drm:drm_mode_addfb], [FB:54]
[    2.798134] Switched to clocksource tsc
[    2.809488] [drm:drm_mode_addfb], [FB:54]
[    2.809566] [drm:drm_mode_addfb], [FB:55]
[    2.809627] [drm:intel_crtc_set_config], [CRTC:3] [FB:53] #connectors=1 (x y) (0 0)
[    2.809633] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    2.809636] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    2.809637] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [CRTC:5]
[    2.809639] [drm:intel_crtc_set_config], [CRTC:5] [FB:53] #connectors=1 (x y) (0 0)
[    2.809640] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[    2.809641] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    2.809642] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [CRTC:5]
[    2.840637] [drm:drm_mode_setcrtc], [CRTC:3]
[    2.840646] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
[    2.840649] [drm:intel_crtc_set_config], [CRTC:3] [FB:54] #connectors=1 (x y) (0 0)
[    2.840656] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1
[    2.840660] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    2.840662] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [CRTC:5]
[    2.849058] [drm:ironlake_update_plane], Writing base 00E57000 00000000 0 0 5760
[    2.865428] [drm:drm_mode_setcrtc], [CRTC:3]
[    2.865441] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
[    2.865444] [drm:intel_crtc_set_config], [CRTC:3] [FB:54] #connectors=1 (x y) (0 0)
[    2.865451] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    2.865454] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    2.865455] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [CRTC:5]
[    2.865497] [drm:drm_mode_setcrtc], [CRTC:5]
[    2.865499] [drm:drm_mode_setcrtc], [CONNECTOR:29:DP-3]
[    2.865500] [drm:intel_crtc_set_config], [CRTC:5] [FB:55] #connectors=1 (x y) (0 0)
[    2.865502] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=1
[    2.865504] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    2.865505] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [CRTC:5]
[    2.881400] [drm:ironlake_update_plane], Writing base 01349000 00000000 0 0 10240
[    2.890032] raid6: sse2x1    6371 MB/s
[    2.903539] [drm:drm_mode_setcrtc], [CRTC:5]
[    2.903552] [drm:drm_mode_setcrtc], [CONNECTOR:29:DP-3]
[    2.903555] [drm:intel_crtc_set_config], [CRTC:5] [FB:55] #connectors=1 (x y) (0 0)
[    2.903561] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[    2.903564] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    2.903565] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [CRTC:5]
[    2.958065] raid6: sse2x2    8905 MB/s
[    2.998185] usb 1-1.5.6.1: new low-speed USB device number 9 using ehci-pci
[    3.026073] raid6: sse2x4    9893 MB/s
[    3.026075] raid6: using algorithm sse2x4 (9893 MB/s)
[    3.026076] raid6: using ssse3x2 recovery algorithm
[    3.027274] xor: measuring software checksum speed
[    3.066073]    prefetch64-sse: 13248.000 MB/sec
[    3.095562] usb 1-1.5.6.1: New USB device found, idVendor=046d, idProduct=c025
[    3.095565] usb 1-1.5.6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.095568] usb 1-1.5.6.1: Product: USB-PS/2 Optical Mouse
[    3.095570] usb 1-1.5.6.1: Manufacturer: B16_b_02
[    3.100575] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.6/1-1.5.6.1/1-1.5.6.1:1.0/input/input7
[    3.100692] hid-generic 0003:046D:C025.0006: input,hidraw3: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.5.6.1/input0
[    3.106046]    generic_sse: 11666.000 MB/sec
[    3.106049] xor: using function: prefetch64-sse (13248.000 MB/sec)
[    3.117138] bio: create slab <bio-1> at 1
[    3.117500] Btrfs loaded
[    3.143123] sr 1:0:0:0: [sr0]  
[    3.143130] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    3.143134] sr 1:0:0:0: [sr0]  
[    3.143137] Sense Key : Illegal Request [current] 
[    3.143143] Info fld=0x20
[    3.143146] sr 1:0:0:0: [sr0]  
[    3.143152] Add. Sense: Illegal mode for this track
[    3.143156] sr 1:0:0:0: [sr0] CDB: 
[    3.143158] Read(10): 28 00 00 00 00 20 00 00 02 00
[    3.143171] end_request: I/O error, dev sr0, sector 128
[    3.143176] Buffer I/O error on device sr0, logical block 32
[    3.143180] Buffer I/O error on device sr0, logical block 33
[    3.146502] sr 1:0:0:0: [sr0]  
[    3.146508] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    3.146512] sr 1:0:0:0: [sr0]  
[    3.146514] Sense Key : Illegal Request [current] 
[    3.146519] Info fld=0x20
[    3.146522] sr 1:0:0:0: [sr0]  
[    3.146527] Add. Sense: Illegal mode for this track
[    3.146531] sr 1:0:0:0: [sr0] CDB: 
[    3.146533] Read(10): 28 00 00 00 00 20 00 00 01 00
[    3.146545] end_request: I/O error, dev sr0, sector 128
[    3.146549] Buffer I/O error on device sr0, logical block 32
[    3.149729] sr 1:0:0:0: [sr0]  
[    3.149734] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    3.149738] sr 1:0:0:0: [sr0]  
[    3.149740] Sense Key : Illegal Request [current] 
[    3.149745] Info fld=0x21
[    3.149748] sr 1:0:0:0: [sr0]  
[    3.149753] Add. Sense: Illegal mode for this track
[    3.149757] sr 1:0:0:0: [sr0] CDB: 
[    3.149759] Read(10): 28 00 00 00 00 21 00 00 01 00
[    3.149771] end_request: I/O error, dev sr0, sector 132
[    3.149775] Buffer I/O error on device sr0, logical block 33
[    3.153258] sr 1:0:0:0: [sr0]  
[    3.153262] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    3.153265] sr 1:0:0:0: [sr0]  
[    3.153267] Sense Key : Illegal Request [current] 
[    3.153271] Info fld=0x8000
[    3.153274] sr 1:0:0:0: [sr0]  
[    3.153279] Add. Sense: Illegal mode for this track
[    3.153283] sr 1:0:0:0: [sr0] CDB: 
[    3.153284] Read(10): 28 00 00 00 80 00 00 00 02 00
[    3.153296] end_request: I/O error, dev sr0, sector 131072
[    3.153300] Buffer I/O error on device sr0, logical block 32768
[    3.153303] Buffer I/O error on device sr0, logical block 32769
[    3.156748] sr 1:0:0:0: [sr0]  
[    3.156753] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    3.156756] sr 1:0:0:0: [sr0]  
[    3.156758] Sense Key : Illegal Request [current] 
[    3.156763] Info fld=0x8000
[    3.156766] sr 1:0:0:0: [sr0]  
[    3.156770] Add. Sense: Illegal mode for this track
[    3.156774] sr 1:0:0:0: [sr0] CDB: 
[    3.156776] Read(10): 28 00 00 00 80 00 00 00 01 00
[    3.156788] end_request: I/O error, dev sr0, sector 131072
[    3.156792] Buffer I/O error on device sr0, logical block 32768
[    3.160077] sr 1:0:0:0: [sr0]  
[    3.160081] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    3.160084] sr 1:0:0:0: [sr0]  
[    3.160086] Sense Key : Illegal Request [current] 
[    3.160090] Info fld=0x8001
[    3.160093] sr 1:0:0:0: [sr0]  
[    3.160098] Add. Sense: Illegal mode for this track
[    3.160102] sr 1:0:0:0: [sr0] CDB: 
[    3.160104] Read(10): 28 00 00 00 80 01 00 00 01 00
[    3.160115] end_request: I/O error, dev sr0, sector 131076
[    3.160119] Buffer I/O error on device sr0, logical block 32769
[    3.170170] usb 1-1.5.6.2: new full-speed USB device number 10 using ehci-pci
[    3.171353] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.266974] usb 1-1.5.6.2: New USB device found, idVendor=08bb, idProduct=2900
[    3.266982] usb 1-1.5.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.266984] usb 1-1.5.6.2: Product: USB Audio CODEC 
[    3.266985] usb 1-1.5.6.2: Manufacturer: Burr-Brown from TI              
[    3.268415] input: Burr-Brown from TI               USB Audio CODEC  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.6/1-1.5.6.2/1-1.5.6.2:1.3/input/input8
[    3.268683] hid-generic 0003:08BB:2900.0007: input,hidraw4: USB HID v1.00 Device [Burr-Brown from TI               USB Audio CODEC ] on usb-0000:00:1a.0-1.5.6.2/input3
[    3.338204] usb 1-1.5.6.3: new low-speed USB device number 11 using ehci-pci
[    3.380765] scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9407 PQ: 0 ANSI: 0
[    3.381017] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    3.382574] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    3.433079] usb 1-1.5.6.3: New USB device found, idVendor=0430, idProduct=0005
[    3.433084] usb 1-1.5.6.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.435849] input: HID 0430:0005 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.6/1-1.5.6.3/1-1.5.6.3:1.0/input/input9
[    3.435949] hid-generic 0003:0430:0005.0008: input,hidraw5: USB HID v1.00 Keyboard [HID 0430:0005] on usb-0000:00:1a.0-1.5.6.3/input0
[    3.566802] systemd-udevd[338]: starting version 204
[    3.610763] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    3.630167] lp: driver loaded but no devices found
[    3.645931] mei_me 0000:00:16.0: setting latency timer to 64
[    3.645991] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[    3.654221] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
[    3.714186] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[    3.821178] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130725/utaddress-251)
[    3.821187] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.821191] ACPI Warning: 0x00000000000011c0-0x00000000000011cf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130725/utaddress-251)
[    3.821194] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.821196] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130725/utaddress-251)
[    3.821199] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.821200] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130725/utaddress-251)
[    3.821203] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.821205] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.828275] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[    3.829715] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[    3.843532] type=1400 audit(1381247380.453:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=427 comm="apparmor_parser"
[    3.891319] Bluetooth: Core ver 2.16
[    3.891346] NET: Registered protocol family 31
[    3.891348] Bluetooth: HCI device and connection manager initialized
[    3.891361] Bluetooth: HCI socket layer initialized
[    3.891364] Bluetooth: L2CAP socket layer initialized
[    3.891371] Bluetooth: SCO socket layer initialized
[    3.895052] cfg80211: Calling CRDA to update world regulatory domain
[    3.905665] usbcore: registered new interface driver btusb
[    3.928137] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    3.928142] Copyright(c) 2003-2013 Intel Corporation
[    3.928203] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.928211] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
[    3.928352] iwlwifi 0000:03:00.0: irq 44 for MSI/MSI-X
[    3.932371] Linux video capture interface: v2.00
[    3.934671] FS-Cache: Loaded
[    3.956557] RPC: Registered named UNIX socket transport module.
[    3.956563] RPC: Registered udp transport module.
[    3.956564] RPC: Registered tcp transport module.
[    3.956566] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.956903] Non-volatile memory driver v1.3
[    3.957316] iwlwifi 0000:03:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
[    3.980516] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[    3.980520] thinkpad_acpi: http://ibm-acpi.sf.net/
[    3.980522] thinkpad_acpi: ThinkPad BIOS 6UET68WW (1.48 ), EC 6UHT33WW-1.14
[    3.980524] thinkpad_acpi: Lenovo ThinkPad T410s, model 2901CTO
[    3.991409] FS-Cache: Netfs 'nfs' registered for caching
[    3.993422] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[    3.993587] thinkpad_acpi: radio switch found; radios are enabled
[    3.993604] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    3.993606] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    3.999730] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480d)
[    4.003310] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    4.004508] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[    4.005769] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10
[    4.006539] usbcore: registered new interface driver uvcvideo
[    4.006542] USB Video Class driver (1.1.1)
[    4.008046] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    4.008192] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    4.013515] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input11
[    4.020109] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    4.020115] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[    4.020117] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    4.020120] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[    4.020231] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[    4.029012] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x3
[    4.034968] hda_codec: CX20585: BIOS auto-probing.
[    4.038459] autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[    4.038465]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.038467]    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[    4.038468]    mono: mono_out=0x0
[    4.038469]    inputs:
[    4.038471]      Mic=0x1b
[    4.038472]      Internal Mic=0x23
[    4.038474]      Dock Mic=0x1a
[    4.039824] hda_codec: Enable sync_write for stable communication
[    4.047089] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[    4.055132] usbcore: registered new interface driver snd-usb-audio
[    4.073690] input: HDA Intel HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    4.074161] input: HDA Intel HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    4.074507] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    4.074865] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    4.075223] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    4.075316] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    4.075467] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    4.094806] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    4.144252] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.144256] Bluetooth: BNEP filters: protocol multicast
[    4.144271] Bluetooth: BNEP socket layer initialized
[    4.171533] Bluetooth: RFCOMM TTY layer initialized
[    4.171555] Bluetooth: RFCOMM socket layer initialized
[    4.171557] Bluetooth: RFCOMM ver 1.11
[    4.303366] cfg80211: World regulatory domain updated:
[    4.303373] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    4.303376] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.303378] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.303380] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    4.303382] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.303384] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    4.318220] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x3
[    4.354216] ppdev: user-space parallel port driver
[    4.356027] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x3
[    4.363633] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x3
[    4.376339] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[    4.377046] init: avahi-cups-reload main process (682) terminated with status 1
[    4.516911] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[    4.615047] init: failsafe main process (747) killed by TERM signal
[    4.682389] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
[    4.950145] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 578367
[    4.950155] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    5.000258] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input19
[    5.131277] Loading iSCSI transport class v2.0-870.
[    5.140000] iscsi: registered transport (tcp)
[    5.245370] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    5.346363] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    5.346533] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.348640] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[    5.356110] iscsi: registered transport (iser)
[    5.356356] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
[    5.391414] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[    5.399442] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
[    5.431375] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    5.484044] bio: create slab <bio-2> at 2
[    5.751910] ipmi message handler version 39.2
[    5.779944] [drm:i915_driver_open], 
[    5.781946] IPMI System Interface driver.
[    5.781990] ipmi_si: Adding default-specified kcs state machine
[    5.781993] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[    5.781999] ipmi_si: Interface detection failed
[    5.805068] Adding 8177660k swap on /dev/mapper/cryptswap1.  Priority:-1 extents:1 across:8177660k SSFS
[    5.813620] [drm:i915_driver_open], 
[    5.813638] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
[    5.814027] [drm:i915_driver_open], 
[    5.814040] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
[    5.814044] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
[    5.814991] [drm:drm_mode_addfb], [FB:56]
[    5.815041] [drm:drm_mode_addfb], [FB:56]
[    5.815355] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
[    5.815360] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8]
[    5.815401] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[    5.815406] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[    5.815652] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[    5.815658] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[    5.815674] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[    5.815678] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[    5.815690] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[    5.815694] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[    5.815707] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[    5.815710] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[    5.815723] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[    5.815726] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[    5.815738] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[    5.815742] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[    5.815754] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[    5.815759] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[    5.822386] ipmi_si: Adding default-specified smic state machine
[    5.822394] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
[    5.822400] ipmi_si: Interface detection failed
[    5.854931] [drm:drm_mode_addfb], [FB:56]
[    5.854943] [drm:drm_mode_setcrtc], [CRTC:3]
[    5.854949] [drm:drm_mode_setcrtc], [CONNECTOR:7:LVDS-1]
[    5.854952] [drm:intel_crtc_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
[    5.854958] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1
[    5.854960] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    5.854962] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [CRTC:5]
[    5.858350] [drm:ironlake_update_plane], Writing base 02179000 00000000 0 0 10240
[    5.858395] ipmi_si: Adding default-specified bt state machine
[    5.858402] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
[    5.858413] ipmi_si: Interface detection failed
[    5.866592] ipmi_si: Unable to find any System Interface(s)
[    5.878698] [drm:asle_set_backlight], bclp = 0x800000ff
[    5.878917] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
[    5.878919] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
[    5.878921] [drm:asle_set_pwm_freq], PWM freq is not supported
[    5.879165] [drm:drm_mode_setcrtc], [CRTC:5]
[    5.879172] [drm:drm_mode_setcrtc], [CONNECTOR:29:DP-3]
[    5.879174] [drm:intel_crtc_set_config], [CRTC:5] [FB:56] #connectors=1 (x y) (0 0)
[    5.879178] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=1
[    5.879181] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    5.879182] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [CRTC:5]
[    5.879189] [drm:ironlake_update_plane], Writing base 02179000 00000000 0 0 10240
[    6.210950] init: plymouth-stop pre-start process (1646) terminated with status 1
[    6.357912] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[    6.357921] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[    6.357924] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1]
[    6.357978] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[    6.357982] [drm:drm_mode_debug_printmodeline], Modeline 10:"1440x900" 60 106890 1440 1488 1520 1924 900 903 909 926 0x48 0xa
[    6.357985] [drm:drm_mode_debug_printmodeline], Modeline 11:"1440x900" 50 89260 1440 1488 1520 1740 900 903 909 1026 0x40 0xa
[    6.358022] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[    6.358293] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[    6.358297] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[    6.358300] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1
[    6.358305] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[    6.358308] [drm:intel_crt_detect], CRT not detected via hotplug
[    6.358468] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[    6.358472] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    6.358475] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    6.358476] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[    6.358908] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    6.358911] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[    6.358914] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[    6.358916] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[    6.358924] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[    6.358927] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[    6.358930] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1]
[    6.374398] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[    6.374407] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[    6.374425] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[    6.374429] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[    6.374431] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[    6.374434] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[    6.374437] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[    6.374438] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[    6.374440] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
[    6.374617] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    6.374626] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[    6.374632] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[    6.374645] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[    6.374651] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[    6.374656] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-3]
[    6.374845] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[    6.374852] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[    6.374856] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[    6.374868] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[    6.374877] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[    6.374879] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[    6.374882] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[    6.374889] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[    6.374893] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[    6.374897] [drm:intel_dp_detect], [CONNECTOR:29:DP-3]
[    6.375199] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 00 02 02 06 00 00 00 00
[    6.376079] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    6.396781] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    6.418253] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    6.418262] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[    6.418982] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    6.439257] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    6.460933] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    6.460995] [drm:drm_edid_to_eld], ELD monitor SMS27A850
[    6.460997] [drm:drm_edid_to_eld], ELD size 8, SAD count 1
[    6.461016] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] probed modes :
[    6.461019] [drm:drm_mode_debug_printmodeline], Modeline 31:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0x9
[    6.461022] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[    6.461026] [drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[    6.461029] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[    6.461032] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[    6.461035] [drm:drm_mode_debug_printmodeline], Modeline 32:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[    6.461038] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[    6.461041] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[    6.461044] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    6.461047] [drm:drm_mode_debug_printmodeline], Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[    6.461050] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[    6.461053] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[    6.461056] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    6.461059] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[    6.461062] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[    6.461065] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[    6.461068] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[    6.461070] [drm:drm_mode_debug_printmodeline], Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    6.461073] [drm:drm_mode_debug_printmodeline], Modeline 51:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[    6.461076] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[    6.461113] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[    6.889947] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[    6.889979] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[    6.889999] [drm:intel_dp_detect], [CONNECTOR:29:DP-3]
[    6.890298] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 00 02 02 06 00 00 00 00
[    6.891802] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    6.927372] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    6.955234] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    6.955243] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[    6.955311] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1]
[    6.970478] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[    6.970547] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
[    6.970711] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    6.970715] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[    6.970742] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-3]
[    6.970916] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[    6.970919] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[    6.970946] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1]
[    6.970970] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1
[    6.970974] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[    6.970975] [drm:intel_crt_detect], CRT not detected via hotplug
[    6.971148] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[    6.971152] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    6.971154] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    6.971155] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[    6.971517] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    6.971518] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[    6.971520] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[    7.040263] [drm:drm_mode_setcrtc], [CRTC:5]
[    7.040271] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
[    7.040277] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=1, fb_changed=0
[    7.040280] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [NOCRTC]
[    7.040282] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[    7.040283] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [CRTC:3]
[    7.040285] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[    7.040288] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
[    7.040469] [drm:intel_dp_link_down], 
[    7.114481] [drm:ironlake_wait_for_vblank], vblank wait timed out
[    7.178480] [drm:ironlake_wait_for_vblank], vblank wait timed out
[    7.290495] ------------[ cut here ]------------
[    7.290559] WARNING: CPU: 2 PID: 1431 at /home/apw/COD/linux/drivers/gpu/drm/i915/intel_display.c:844 intel_wait_for_pipe_off+0x1e1/0x1f0 [i915]()
[    7.290562] pipe_off wait timed out
[    7.290565] Modules linked in: dm_crypt ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd parport_pc ppdev rfcomm bnep snd_hda_codec_hdmi arc4 nfsd snd_hda_codec_conexant microcode auth_rpcgss iwldvm nfs_acl snd_hda_intel mac80211 uvcvideo nfs snd_hda_codec psmouse thinkpad_acpi lockd binfmt_misc serio_raw snd_usb_audio videobuf2_vmalloc nvram sunrpc videobuf2_memops videobuf2_core snd_usbmidi_lib snd_seq_midi snd_hwdep fscache snd_seq_midi_event videodev iwlwifi snd_pcm snd_rawmidi snd_page_alloc btusb joydev bluetooth cfg80211 snd_seq snd_seq_device snd_timer intel_ips lpc_ich snd soundcore tpm_tis mei_me mei mac_hid lp parport btrfs hid_generic xor raid6_pq libcrc32c hid_logitech_dj usbhid hid usb_storage mxm_wmi i915 i2c_algo_bit drm_kms_helper e1000e drm ahci libahci ptp pps_core video wmi [last unloaded: ipmi_msghandler]
[    7.290658] CPU: 2 PID: 1431 Comm: Xorg Tainted: G        W    3.12.0-999-generic #201310070425
[    7.290659] Hardware name: LENOVO 2901CTO/2901CTO, BIOS 6UET68WW (1.48 ) 12/12/2011
[    7.290661]  000000000000034c ffff8800b1b079e8 ffffffff817478f3 0000000000000007
[    7.290663]  ffff8800b1b07a38 ffff8800b1b07a28 ffffffff8106759c ffff88022fa3c000
[    7.290665]  ffff88022a13c000 0000000000071008 00000000fffee1fa ffff8800b1b07fd8
[    7.290667] Call Trace:
[    7.290676]  [<ffffffff817478f3>] dump_stack+0x46/0x58
[    7.290680]  [<ffffffff8106759c>] warn_slowpath_common+0x8c/0xc0
[    7.290682]  [<ffffffff81067686>] warn_slowpath_fmt+0x46/0x50
[    7.290696]  [<ffffffffa012c1d1>] intel_wait_for_pipe_off+0x1e1/0x1f0 [i915]
[    7.290707]  [<ffffffffa012c293>] intel_disable_pipe+0xb3/0xc0 [i915]
[    7.290718]  [<ffffffffa012ec02>] ironlake_crtc_disable+0xd2/0x2a0 [i915]
[    7.290729]  [<ffffffffa012f1e4>] intel_crtc_disable+0x34/0x140 [i915]
[    7.290740]  [<ffffffffa013195d>] __intel_set_mode+0x10d/0x370 [i915]
[    7.290751]  [<ffffffffa0133816>] intel_set_mode+0x16/0x30 [i915]
[    7.290762]  [<ffffffffa0133acd>] intel_crtc_set_config+0x29d/0x310 [i915]
[    7.290766]  [<ffffffff810bd8df>] ? vprintk+0x1f/0x30
[    7.290768]  [<ffffffff811cfc80>] ? __pollwait+0xf0/0xf0
[    7.290784]  [<ffffffffa00525dc>] drm_mode_set_config_internal+0x5c/0xe0 [drm]
[    7.290792]  [<ffffffffa00552b8>] drm_mode_setcrtc+0x328/0x560 [drm]
[    7.290800]  [<ffffffffa0044f1a>] drm_ioctl+0x4fa/0x620 [drm]
[    7.290809]  [<ffffffffa0054f90>] ? drm_mode_setplane+0x3f0/0x3f0 [drm]
[    7.290811]  [<ffffffff811cedda>] do_vfs_ioctl+0x7a/0x2e0
[    7.290815]  [<ffffffff811bcc01>] ? vfs_read+0x111/0x180
[    7.290816]  [<ffffffff811cf0d1>] SyS_ioctl+0x91/0xb0
[    7.290818]  [<ffffffff811bce40>] ? SyS_read+0x70/0xa0
[    7.290821]  [<ffffffff8175e06d>] system_call_fastpath+0x1a/0x1f
[    7.290823] ---[ end trace 3ac87b2b8d6b4554 ]---
[    7.298511] [drm:intel_disable_shared_dpll], disable PCH DPLL B (active 1, on? 1) for crtc 5
[    7.298523] [drm:intel_disable_shared_dpll], disabling PCH DPLL B
[    7.298938] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6
[    7.298942] [drm:ironlake_check_srwm], watermark 1: display plane 36, fbc lines 3, cursor 6
[    7.298944] [drm:ironlake_check_srwm], watermark 2: display plane 116, fbc lines 4, cursor 10
[    7.298946] [drm:intel_update_fbc], disabled per chip default
[    7.298959] [drm:intel_connector_check_state], [CONNECTOR:7:LVDS-1]
[    7.298971] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
[    7.298974] [drm:check_encoder_state], [ENCODER:15:DAC-15]
[    7.298977] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
[    7.298980] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
[    7.298983] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
[    7.298985] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
[    7.298988] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
[    7.298990] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
[    7.298993] [drm:check_crtc_state], [CRTC:3]
[    7.299012] [drm:check_crtc_state], [CRTC:5]
[    7.299015] [drm:check_shared_dpll_state], PCH DPLL A
[    7.299020] [drm:check_shared_dpll_state], PCH DPLL B
[    7.299251] [drm:intel_crtc_cursor_set], cursor off
[    7.299589] [drm:drm_mode_setcrtc], [CRTC:3]
[    7.299595] [drm:drm_mode_setcrtc], [CONNECTOR:29:DP-3]
[    7.299597] [drm:intel_crtc_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
[    7.299600] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[    7.299601] [drm:drm_mode_debug_printmodeline], Modeline 50:"1440x900" 60 106890 1440 1488 1520 1924 900 903 909 926 0x48 0xa
[    7.299603] [drm:drm_mode_debug_printmodeline], Modeline 54:"" 0 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x0 0x9
[    7.299606] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
[    7.299607] [drm:intel_modeset_stage_output_state], [CONNECTOR:7:LVDS-1] to [NOCRTC]
[    7.299609] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[    7.299610] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[    7.299611] [drm:intel_modeset_stage_output_state], [CONNECTOR:29:DP-3] to [CRTC:3]
[    7.299612] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[    7.299613] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[    7.299615] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    7.299618] [drm:connected_sink_compute_bpp], [CONNECTOR:29:DP-3] checking for sink bpp constrains
[    7.299621] [drm:intel_dp_compute_config], DP link computation with max lane count 4 max bw 0a pixel clock 241500KHz
[    7.299626] [drm:intel_dp_compute_config], DP link bw 0a lane count 4 clock 270000 bpp 24
[    7.299628] [drm:intel_dp_compute_config], DP link bw required 579600 available 864000
[    7.299630] [drm:ironlake_check_fdi_lanes], checking fdi config on pipe A, lanes 3
[    7.299632] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[    7.299633] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[    7.299635] [drm:intel_dump_pipe_config], cpu_transcoder: A
[    7.299636] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[    7.299637] [drm:intel_dump_pipe_config], fdi/pch: 1, lanes: 3, gmch_m: 7503143, gmch_n: 8388608, link_m: 468946, link_n: 524288, tu: 64
[    7.299639] [drm:intel_dump_pipe_config], requested mode:
[    7.299640] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x0 0x9
[    7.299642] [drm:intel_dump_pipe_config], adjusted mode:
[    7.299643] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x0 0x9
[    7.299645] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    7.299646] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    7.299647] [drm:intel_dump_pipe_config], ips: 0
[    7.299650] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[    7.362510] [drm:intel_disable_shared_dpll], disable PCH DPLL A (active 1, on? 1) for crtc 3
[    7.362521] [drm:intel_disable_shared_dpll], disabling PCH DPLL A
[    7.362932] [drm:intel_update_fbc], no output, disabling
[    7.362957] [drm:intel_get_shared_dpll], CRTC:3 dropping existing PCH DPLL A
[    7.362959] [drm:intel_get_shared_dpll], CRTC:3 using pre-allocated PCH DPLL A
[    7.362960] [drm:intel_get_shared_dpll], using PCH DPLL A for pipe A
[    7.362961] [drm:intel_get_shared_dpll], setting up PCH DPLL A
[    7.362979] [drm:ironlake_update_plane], Writing base 02179000 00000000 0 0 10240
[    7.362987] [drm:intel_crtc_mode_set], [ENCODER:28:TMDS-28] set [MODE:0:]
[    7.362990] [drm:intel_dp_mode_set], Enabling DP audio on pipe A
[    7.362992] [drm:intel_write_eld], ELD on [CONNECTOR:29:DP-3], [ENCODER:28:TMDS-28]
[    7.362995] [drm:ironlake_write_eld], ELD on pipe A
[    7.362997] [drm:ironlake_write_eld], Audio directed to unknown port
[    7.362998] [drm:ironlake_write_eld], ELD: DisplayPort detected
[    7.363006] [drm:ironlake_write_eld], ELD size 8
[    7.363013] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 13, cursor: 6
[    7.363016] [drm:ironlake_check_srwm], watermark 1: display plane 78, fbc lines 3, cursor 6
[    7.363018] [drm:ironlake_check_srwm], watermark 2: display plane 259, fbc lines 4, cursor 10
[    7.426539] [drm:ironlake_wait_for_vblank], vblank wait timed out
[    7.490520] [drm:ironlake_wait_for_vblank], vblank wait timed out
[    7.490843] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[    7.490845] [drm:ironlake_fdi_link_train], FDI train 1 done.
[    7.491000] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[    7.491002] [drm:ironlake_fdi_link_train], FDI train 2 done.
[    7.491003] [drm:ironlake_fdi_link_train], FDI train done
[    7.491005] [drm:ironlake_enable_shared_dpll], enable PCH DPLL A (active 0, on? 0)for crtc 3
[    7.491007] [drm:ironlake_enable_shared_dpll], enabling PCH DPLL A
[    7.492372] [drm:intel_update_fbc], disabled per chip default
[    7.492783] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[    7.492796] [drm:ibx_irq_handler], PCH transcoder A FIFO underrun
[    7.493443] [drm:intel_dp_start_link_train], clock recovery OK
[    7.493446] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[    7.494371] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
[    7.518541] [drm:intel_connector_check_state], [CONNECTOR:29:DP-3]
[    7.518549] [drm:check_encoder_state], [ENCODER:8:LVDS-8]
[    7.518555] [drm:check_encoder_state], [ENCODER:15:DAC-15]
[    7.518560] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
[    7.518565] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
[    7.518569] [drm:check_encoder_state], [ENCODER:22:TMDS-22]
[    7.518575] [drm:check_encoder_state], [ENCODER:24:TMDS-24]
[    7.518579] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
[    7.518584] [drm:check_encoder_state], [ENCODER:28:TMDS-28]
[    7.518589] [drm:check_crtc_state], [CRTC:3]
[    7.518612] [drm:check_crtc_state], [CRTC:5]
[    7.518617] [drm:check_shared_dpll_state], PCH DPLL A
[    7.518624] [drm:check_shared_dpll_state], PCH DPLL B
[    7.519043] [drm:asle_set_backlight], bclp = 0x80000003
[    7.519047] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
[    7.519261] [drm:asle_set_pwm_freq], PWM freq is not supported
[    7.529733] [drm:intel_crtc_cursor_set], cursor off
[    7.685726] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[    7.685734] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[    7.685737] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1]
[    7.685750] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[    7.685752] [drm:drm_mode_debug_printmodeline], Modeline 10:"1440x900" 60 106890 1440 1488 1520 1924 900 903 909 926 0x48 0xa
[    7.685755] [drm:drm_mode_debug_printmodeline], Modeline 11:"1440x900" 50 89260 1440 1488 1520 1740 900 903 909 1026 0x40 0xa
[    7.685759] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[    7.685946] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[    7.685949] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[    7.685951] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1
[    7.685955] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[    7.685956] [drm:intel_crt_detect], CRT not detected via hotplug
[    7.686192] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[    7.686201] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    7.686205] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    7.686208] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[    7.686579] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    7.686581] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[    7.686582] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[    7.686587] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[    7.686593] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[    7.686595] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[    7.686598] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1]
[    7.702536] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[    7.702541] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[    7.702546] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[    7.702549] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[    7.702552] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[    7.702555] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[    7.702558] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[    7.702561] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[    7.702563] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
[    7.702756] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    7.702762] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[    7.702766] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[    7.702777] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[    7.702781] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[    7.702785] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-3]
[    7.703036] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[    7.703044] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[    7.703049] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[    7.703060] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[    7.703065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[    7.703068] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[    7.703073] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[    7.703084] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[    7.703087] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[    7.703093] [drm:intel_dp_detect], [CONNECTOR:29:DP-3]
[    7.703454] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 00 02 02 06 00 00 00 00
[    7.704329] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    7.725537] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    7.746399] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    7.746403] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[    7.747124] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    7.768009] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    7.789182] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[    7.789231] [drm:drm_edid_to_eld], ELD monitor SMS27A850
[    7.789233] [drm:drm_edid_to_eld], ELD size 8, SAD count 1
[    7.789247] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] probed modes :
[    7.789249] [drm:drm_mode_debug_printmodeline], Modeline 31:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0x9
[    7.789252] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[    7.789255] [drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[    7.789258] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[    7.789261] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[    7.789264] [drm:drm_mode_debug_printmodeline], Modeline 32:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[    7.789267] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[    7.789270] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[    7.789273] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    7.789276] [drm:drm_mode_debug_printmodeline], Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[    7.789279] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[    7.789282] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[    7.789285] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    7.789288] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[    7.789291] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[    7.789294] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[    7.789297] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[    7.789300] [drm:drm_mode_debug_printmodeline], Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    7.789303] [drm:drm_mode_debug_printmodeline], Modeline 51:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[    7.789306] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[    7.789320] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[    8.537240] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
[    8.537291] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    8.690424] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[   10.299210] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   10.550377] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input20
[   16.041203] [drm:i915_driver_open], 
[   16.729288] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   16.729298] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[   16.729301] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1]
[   16.729320] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[   16.729323] [drm:drm_mode_debug_printmodeline], Modeline 10:"1440x900" 60 106890 1440 1488 1520 1924 900 903 909 926 0x48 0xa
[   16.729327] [drm:drm_mode_debug_printmodeline], Modeline 11:"1440x900" 50 89260 1440 1488 1520 1740 900 903 909 1026 0x40 0xa
[   16.729333] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   16.729495] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[   16.729499] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[   16.729502] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1
[   16.729507] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[   16.729509] [drm:intel_crt_detect], CRT not detected via hotplug
[   16.729677] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[   16.729682] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   16.729684] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   16.729686] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[   16.730046] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   16.730050] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[   16.730052] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[   16.730055] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[   16.730067] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[   16.730070] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[   16.730073] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1]
[   16.748242] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[   16.748253] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[   16.748276] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[   16.748280] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[   16.748282] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[   16.748287] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[   16.748291] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[   16.748293] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[   16.748296] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
[   16.748469] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[   16.748474] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[   16.748476] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[   16.748483] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[   16.748486] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[   16.748488] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-3]
[   16.748653] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[   16.748657] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[   16.748660] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[   16.748667] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[   16.748670] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[   16.748672] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[   16.748676] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[   16.748689] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[   16.748691] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[   16.748695] [drm:intel_dp_detect], [CONNECTOR:29:DP-3]
[   16.748988] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 00 02 02 06 00 00 00 00
[   16.749891] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   16.776339] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   16.819199] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   16.819209] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[   16.819990] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   16.840591] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   16.861139] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   16.861207] [drm:drm_edid_to_eld], ELD monitor SMS27A850
[   16.861210] [drm:drm_edid_to_eld], ELD size 8, SAD count 1
[   16.861230] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] probed modes :
[   16.861233] [drm:drm_mode_debug_printmodeline], Modeline 31:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0x9
[   16.861236] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[   16.861239] [drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   16.861242] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[   16.861246] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[   16.861249] [drm:drm_mode_debug_printmodeline], Modeline 32:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[   16.861252] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[   16.861255] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[   16.861258] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   16.861261] [drm:drm_mode_debug_printmodeline], Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[   16.861264] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[   16.861267] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[   16.861270] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   16.861273] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[   16.861276] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[   16.861279] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[   16.861282] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[   16.861284] [drm:drm_mode_debug_printmodeline], Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   16.861287] [drm:drm_mode_debug_printmodeline], Modeline 51:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[   16.861290] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   16.861320] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[   16.953615] [drm:i915_driver_open], 
[   17.082575] [drm:i915_driver_open], 
[   17.115705] [drm:intel_crtc_cursor_set], cursor off
[   17.152298] [drm:intel_crtc_cursor_set], cursor off
[   17.205346] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   17.205355] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[   17.205358] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1]
[   17.205374] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[   17.205377] [drm:drm_mode_debug_printmodeline], Modeline 10:"1440x900" 60 106890 1440 1488 1520 1924 900 903 909 926 0x48 0xa
[   17.205380] [drm:drm_mode_debug_printmodeline], Modeline 11:"1440x900" 50 89260 1440 1488 1520 1740 900 903 909 1026 0x40 0xa
[   17.205386] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   17.205545] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[   17.205549] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[   17.205551] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1
[   17.205556] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[   17.205559] [drm:intel_crt_detect], CRT not detected via hotplug
[   17.205732] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[   17.205737] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   17.205739] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   17.205741] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[   17.206107] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   17.206110] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[   17.206112] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[   17.206114] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[   17.206123] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[   17.206126] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[   17.206128] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1]
[   17.220234] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[   17.220244] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[   17.220422] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[   17.220427] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[   17.220430] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[   17.220434] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[   17.220438] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[   17.220441] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[   17.220443] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
[   17.220602] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[   17.220606] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[   17.220608] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[   17.220615] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[   17.220618] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[   17.220620] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-3]
[   17.220777] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[   17.220782] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[   17.220784] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[   17.220791] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[   17.220794] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[   17.220796] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[   17.220800] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[   17.220815] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[   17.220818] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[   17.220822] [drm:intel_dp_detect], [CONNECTOR:29:DP-3]
[   17.221115] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 00 02 02 06 00 00 00 00
[   17.222057] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   17.245566] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   17.270150] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   17.270161] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[   17.270908] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   17.292976] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   17.313621] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   17.313684] [drm:drm_edid_to_eld], ELD monitor SMS27A850
[   17.313686] [drm:drm_edid_to_eld], ELD size 8, SAD count 1
[   17.313704] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] probed modes :
[   17.313706] [drm:drm_mode_debug_printmodeline], Modeline 31:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0x9
[   17.313709] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[   17.313712] [drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   17.313715] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[   17.313718] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[   17.313721] [drm:drm_mode_debug_printmodeline], Modeline 32:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[   17.313724] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[   17.313728] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[   17.313731] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   17.313734] [drm:drm_mode_debug_printmodeline], Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[   17.313737] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[   17.313740] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[   17.313743] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   17.313746] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[   17.313749] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[   17.313752] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[   17.313755] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[   17.313758] [drm:drm_mode_debug_printmodeline], Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   17.313761] [drm:drm_mode_debug_printmodeline], Modeline 51:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[   17.313764] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   17.313789] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[   17.473209] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   17.473219] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[   17.473222] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1]
[   17.473240] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[   17.473243] [drm:drm_mode_debug_printmodeline], Modeline 10:"1440x900" 60 106890 1440 1488 1520 1924 900 903 909 926 0x48 0xa
[   17.473246] [drm:drm_mode_debug_printmodeline], Modeline 11:"1440x900" 50 89260 1440 1488 1520 1740 900 903 909 1026 0x40 0xa
[   17.473252] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   17.473402] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[   17.473406] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[   17.473409] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1
[   17.473414] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[   17.473416] [drm:intel_crt_detect], CRT not detected via hotplug
[   17.473585] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[   17.473590] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   17.473592] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   17.473594] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[   17.473957] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   17.473960] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[   17.473962] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[   17.473965] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[   17.473973] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[   17.473976] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[   17.473979] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1]
[   17.487465] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[   17.487475] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[   17.487494] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[   17.487498] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[   17.487501] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[   17.487505] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[   17.487508] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[   17.487511] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[   17.487514] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
[   17.487735] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[   17.487740] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[   17.487742] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[   17.487749] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[   17.487752] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[   17.487754] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-3]
[   17.487917] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[   17.487921] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[   17.487923] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[   17.487929] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[   17.487932] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[   17.487933] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[   17.487937] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[   17.487949] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[   17.487952] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[   17.487955] [drm:intel_dp_detect], [CONNECTOR:29:DP-3]
[   17.488254] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 00 02 02 06 00 00 00 00
[   17.489154] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   17.512489] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   17.533180] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   17.533189] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[   17.533942] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   17.554311] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   17.577712] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   17.577775] [drm:drm_edid_to_eld], ELD monitor SMS27A850
[   17.577778] [drm:drm_edid_to_eld], ELD size 8, SAD count 1
[   17.577796] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] probed modes :
[   17.577798] [drm:drm_mode_debug_printmodeline], Modeline 31:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0x9
[   17.577802] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[   17.577805] [drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   17.577808] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[   17.577811] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[   17.577814] [drm:drm_mode_debug_printmodeline], Modeline 32:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[   17.577817] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[   17.577820] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[   17.577823] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   17.577826] [drm:drm_mode_debug_printmodeline], Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[   17.577829] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[   17.577832] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[   17.577835] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   17.577838] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[   17.577841] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[   17.577844] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[   17.577847] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[   17.577850] [drm:drm_mode_debug_printmodeline], Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   17.577853] [drm:drm_mode_debug_printmodeline], Modeline 51:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[   17.577856] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   17.577880] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[   17.842451] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   17.842460] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[   17.842463] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1]
[   17.842480] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[   17.842483] [drm:drm_mode_debug_printmodeline], Modeline 10:"1440x900" 60 106890 1440 1488 1520 1924 900 903 909 926 0x48 0xa
[   17.842485] [drm:drm_mode_debug_printmodeline], Modeline 11:"1440x900" 50 89260 1440 1488 1520 1740 900 903 909 1026 0x40 0xa
[   17.842490] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   17.842602] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[   17.842604] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[   17.842606] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1
[   17.842609] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[   17.842611] [drm:intel_crt_detect], CRT not detected via hotplug
[   17.842773] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[   17.842778] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   17.842780] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   17.842781] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[   17.843157] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   17.843160] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[   17.843162] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[   17.843164] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[   17.843172] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[   17.843175] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[   17.843178] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1]
[   17.855503] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[   17.855513] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[   17.855535] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[   17.855539] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[   17.855542] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[   17.855546] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[   17.855550] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[   17.855553] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[   17.855555] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
[   17.856207] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[   17.856215] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[   17.856218] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[   17.856230] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[   17.856233] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[   17.856236] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-3]
[   17.856398] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[   17.856402] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[   17.856404] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[   17.856411] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[   17.856414] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[   17.856416] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[   17.856420] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[   17.856433] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[   17.856436] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[   17.856440] [drm:intel_dp_detect], [CONNECTOR:29:DP-3]
[   17.856729] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 00 02 02 06 00 00 00 00
[   17.857615] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   17.881163] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   17.901637] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   17.901647] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[   17.902371] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   17.922633] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   17.942857] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   17.942920] [drm:drm_edid_to_eld], ELD monitor SMS27A850
[   17.942922] [drm:drm_edid_to_eld], ELD size 8, SAD count 1
[   17.942940] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] probed modes :
[   17.942942] [drm:drm_mode_debug_printmodeline], Modeline 31:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0x9
[   17.942946] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[   17.942949] [drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   17.942952] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[   17.942955] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[   17.942958] [drm:drm_mode_debug_printmodeline], Modeline 32:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[   17.942961] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[   17.942964] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[   17.942967] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   17.942970] [drm:drm_mode_debug_printmodeline], Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[   17.942973] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[   17.942976] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[   17.942979] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   17.942982] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[   17.942985] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[   17.942988] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[   17.942991] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[   17.942994] [drm:drm_mode_debug_printmodeline], Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   17.942997] [drm:drm_mode_debug_printmodeline], Modeline 51:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[   17.943000] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   17.943024] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[   17.946565] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   17.946573] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[   17.946576] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1]
[   17.946593] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[   17.946595] [drm:drm_mode_debug_printmodeline], Modeline 10:"1440x900" 60 106890 1440 1488 1520 1924 900 903 909 926 0x48 0xa
[   17.946597] [drm:drm_mode_debug_printmodeline], Modeline 11:"1440x900" 50 89260 1440 1488 1520 1740 900 903 909 1026 0x40 0xa
[   17.946602] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   17.946719] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[   17.946722] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[   17.946724] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1
[   17.946728] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[   17.946730] [drm:intel_crt_detect], CRT not detected via hotplug
[   17.946891] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[   17.946896] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   17.946899] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   17.946900] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[   17.947263] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   17.947265] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[   17.947267] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[   17.947269] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[   17.947275] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[   17.947277] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[   17.947280] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1]
[   17.959504] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[   17.959512] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[   17.959526] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[   17.959529] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[   17.959531] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[   17.959534] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[   17.959536] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[   17.959538] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[   17.959540] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
[   17.959731] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[   17.959736] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[   17.959738] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[   17.959745] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[   17.959748] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[   17.959749] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-3]
[   17.959938] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[   17.959942] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[   17.959944] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[   17.959950] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[   17.959952] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[   17.959954] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[   17.959956] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[   17.959965] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[   17.959967] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[   17.959971] [drm:intel_dp_detect], [CONNECTOR:29:DP-3]
[   17.960258] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 00 02 02 06 00 00 00 00
[   17.961147] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   17.981222] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   18.001349] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   18.001358] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[   18.002079] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   18.022158] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   18.042307] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   18.042369] [drm:drm_edid_to_eld], ELD monitor SMS27A850
[   18.042371] [drm:drm_edid_to_eld], ELD size 8, SAD count 1
[   18.042388] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] probed modes :
[   18.042390] [drm:drm_mode_debug_printmodeline], Modeline 31:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0x9
[   18.042394] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[   18.042397] [drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   18.042400] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[   18.042403] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[   18.042406] [drm:drm_mode_debug_printmodeline], Modeline 32:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[   18.042409] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[   18.042412] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[   18.042415] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   18.042418] [drm:drm_mode_debug_printmodeline], Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[   18.042421] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[   18.042424] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[   18.042427] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   18.042430] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[   18.042433] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[   18.042436] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[   18.042439] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[   18.042442] [drm:drm_mode_debug_printmodeline], Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   18.042445] [drm:drm_mode_debug_printmodeline], Modeline 51:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[   18.042448] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   18.042471] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[   18.057851] [drm:i915_driver_open], 
[   18.088068] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   18.088079] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[   18.088082] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1]
[   18.088100] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[   18.088103] [drm:drm_mode_debug_printmodeline], Modeline 10:"1440x900" 60 106890 1440 1488 1520 1924 900 903 909 926 0x48 0xa
[   18.088107] [drm:drm_mode_debug_printmodeline], Modeline 11:"1440x900" 50 89260 1440 1488 1520 1740 900 903 909 1026 0x40 0xa
[   18.088114] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   18.088265] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[   18.088269] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[   18.088271] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1
[   18.088275] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[   18.088277] [drm:intel_crt_detect], CRT not detected via hotplug
[   18.088439] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[   18.088444] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   18.088447] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   18.088449] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[   18.088817] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   18.088820] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[   18.088822] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[   18.088824] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[   18.088832] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[   18.088835] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[   18.088838] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1]
[   18.103759] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[   18.103769] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[   18.103790] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[   18.103794] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[   18.103797] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[   18.103802] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[   18.103807] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[   18.103809] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[   18.103812] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
[   18.103974] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[   18.103978] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[   18.103993] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[   18.104000] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[   18.104002] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[   18.104004] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-3]
[   18.104160] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[   18.104163] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[   18.104166] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[   18.104172] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[   18.104174] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[   18.104176] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[   18.104179] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[   18.104194] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[   18.104197] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[   18.104201] [drm:intel_dp_detect], [CONNECTOR:29:DP-3]
[   18.104486] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 00 02 02 06 00 00 00 00
[   18.105367] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   18.130495] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   18.150729] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   18.150737] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[   18.151463] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   18.171685] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   18.191651] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   18.191707] [drm:drm_edid_to_eld], ELD monitor SMS27A850
[   18.191709] [drm:drm_edid_to_eld], ELD size 8, SAD count 1
[   18.191726] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] probed modes :
[   18.191728] [drm:drm_mode_debug_printmodeline], Modeline 31:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0x9
[   18.191732] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[   18.191735] [drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   18.191738] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[   18.191741] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[   18.191744] [drm:drm_mode_debug_printmodeline], Modeline 32:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[   18.191747] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[   18.191750] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[   18.191753] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   18.191756] [drm:drm_mode_debug_printmodeline], Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[   18.191759] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[   18.191762] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[   18.191765] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   18.191768] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[   18.191771] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[   18.191774] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[   18.191777] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[   18.191780] [drm:drm_mode_debug_printmodeline], Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   18.191783] [drm:drm_mode_debug_printmodeline], Modeline 51:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[   18.191786] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   18.191807] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[   19.031772] wlan0: authenticate with c4:10:8a:56:4d:d8
[   19.045197] wlan0: send auth to c4:10:8a:56:4d:d8 (try 1/3)
[   19.151618] wlan0: send auth to c4:10:8a:56:4d:d8 (try 2/3)
[   19.168089] wlan0: authenticated
[   19.171614] wlan0: associate with c4:10:8a:56:4d:d8 (try 1/3)
[   19.178267] wlan0: RX AssocResp from c4:10:8a:56:4d:d8 (capab=0x431 status=0 aid=5)
[   19.182164] wlan0: associated
[   19.182222] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   19.318134] [drm:drm_mode_addfb], [FB:54]
[   32.849697] [drm:intel_crtc_cursor_set], cursor off
[   38.264554] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   38.264562] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[   38.264564] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1]
[   38.264579] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[   38.264581] [drm:drm_mode_debug_printmodeline], Modeline 10:"1440x900" 60 106890 1440 1488 1520 1924 900 903 909 926 0x48 0xa
[   38.264584] [drm:drm_mode_debug_printmodeline], Modeline 11:"1440x900" 50 89260 1440 1488 1520 1740 900 903 909 1026 0x40 0xa
[   38.264588] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[   38.264697] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[   38.264700] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[   38.264702] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1
[   38.264706] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[   38.264708] [drm:intel_crt_detect], CRT not detected via hotplug
[   38.264878] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[   38.264883] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   38.264885] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   38.264887] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[   38.265255] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[   38.265259] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[   38.265261] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[   38.265264] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[   38.265273] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[   38.265276] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[   38.265279] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1]
[   38.277897] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[   38.277904] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[   38.277924] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[   38.277927] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[   38.277929] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[   38.277932] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[   38.277935] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[   38.277937] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[   38.277939] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
[   38.278114] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[   38.278117] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[   38.278118] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[   38.278123] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[   38.278125] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[   38.278127] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-3]
[   38.278288] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[   38.278291] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[   38.278294] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[   38.278300] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[   38.278303] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[   38.278305] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[   38.278309] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[   38.278322] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[   38.278324] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[   38.278328] [drm:intel_dp_detect], [CONNECTOR:29:DP-3]
[   38.278620] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 01 01 00 01 00 02 02 06 00 00 00 00
[   38.279509] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   38.300217] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   38.320261] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   38.320268] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[   38.320982] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   38.341144] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   38.361385] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[   38.361446] [drm:drm_edid_to_eld], ELD monitor SMS27A850
[   38.361448] [drm:drm_edid_to_eld], ELD size 8, SAD count 1
[   38.361465] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] probed modes :
[   38.361468] [drm:drm_mode_debug_printmodeline], Modeline 31:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0x9
[   38.361471] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[   38.361474] [drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   38.361477] [drm:drm_mode_debug_printmodeline], Modeline 34:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[   38.361480] [drm:drm_mode_debug_printmodeline], Modeline 33:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[   38.361483] [drm:drm_mode_debug_printmodeline], Modeline 32:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[   38.361486] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[   38.361489] [drm:drm_mode_debug_printmodeline], Modeline 45:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[   38.361492] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   38.361495] [drm:drm_mode_debug_printmodeline], Modeline 47:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[   38.361498] [drm:drm_mode_debug_printmodeline], Modeline 48:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[   38.361501] [drm:drm_mode_debug_printmodeline], Modeline 49:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[   38.361504] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   38.361507] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[   38.361510] [drm:drm_mode_debug_printmodeline], Modeline 38:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[   38.361513] [drm:drm_mode_debug_printmodeline], Modeline 39:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[   38.361516] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[   38.361519] [drm:drm_mode_debug_printmodeline], Modeline 41:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   38.361522] [drm:drm_mode_debug_printmodeline], Modeline 51:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[   38.361525] [drm:drm_mode_debug_printmodeline], Modeline 42:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   38.361547] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[   85.046804] [drm:intel_crtc_cursor_set], cursor off
[  103.136810] [drm:intel_crtc_cursor_set], cursor off
[  109.149938] [drm:intel_hpd_irq_handler], Received HPD interrupt on PIN 6 - cnt: 0
[  109.150030] [drm:i915_hotplug_work_func], running encoder hotplug functions
[  109.150036] [drm:i915_hotplug_work_func], Connector HDMI-A-3 (pin 6) received hotplug event.
[  109.150047] [drm:i915_hotplug_work_func], Connector DP-3 (pin 6) received hotplug event.
[  109.150051] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-3]
[  109.150227] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[  109.150235] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[  109.150240] [drm:intel_hpd_irq_event], [CONNECTOR:25:HDMI-A-3] status updated from 2 to 2
[  109.152776] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7015003f
[  109.154513] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.158552] usb 1-1.5: clear tt 4 (0070) error -71
[  109.160313] hid-generic 0003:08BB:2900.0007: can't reset device, 0000:00:1a.0-1.5.6.2/input3, status -71
[  109.161057] hid-generic 0003:0430:0005.0008: can't reset device, 0000:00:1a.0-1.5.6.3/input0, status -71
[  109.162682] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.162694] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7015003f
[  109.164045] hid-generic 0003:046D:C025.0006: can't reset device, 0000:00:1a.0-1.5.6.1/input0, status -71
[  109.164268] usb 1-1.5.6: clear tt 2 (00a0) error -71
[  109.166671] usb 1-1.5: clear tt 4 (0070) error -71
[  109.168521] usb 1-1.5.6: clear tt 3 (00b0) error -71
[  109.170645] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7015003f
[  109.170814] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.172573] hid-generic 0003:0430:0005.0008: can't reset device, 0000:00:1a.0-1.5.6.3/input0, status -71
[  109.172796] usb 1-1.5.6: clear tt 1 (0090) error -71
[  109.174795] usb 1-1.5: clear tt 4 (0070) error -71
[  109.176179] hid-generic 0003:08BB:2900.0007: can't reset device, 0000:00:1a.0-1.5.6.2/input3, status -71
[  109.176193] [drm:intel_dp_link_down], 
[  109.177044] usb 1-1.5.6: clear tt 3 (00b0) error -71
[  109.178948] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.180212] hid-generic 0003:046D:C025.0006: can't reset device, 0000:00:1a.0-1.5.6.1/input0, status -71
[  109.181081] hid-generic 0003:0430:0005.0008: can't reset device, 0000:00:1a.0-1.5.6.3/input0, status -71
[  109.181317] usb 1-1.5.6: clear tt 2 (00a0) error -71
[  109.182939] usb 1-1.5: clear tt 4 (0070) error -71
[  109.185331] hid-generic 0003:08BB:2900.0007: can't reset device, 0000:00:1a.0-1.5.6.2/input3, status -71
[  109.185569] usb 1-1.5.6: clear tt 1 (0090) error -71
[  109.187101] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.189571] hid-generic 0003:046D:C025.0006: can't reset device, 0000:00:1a.0-1.5.6.1/input0, status -71
[  109.189803] usb 1-1.5.6: clear tt 3 (00b0) error -71
[  109.191051] usb 1-1.5: clear tt 4 (0070) error -71
[  109.193835] hid-generic 0003:0430:0005.0008: can't reset device, 0000:00:1a.0-1.5.6.3/input0, status -71
[  109.194065] usb 1-1.5.6: clear tt 2 (00a0) error -71
[  109.195162] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.196145] [drm:intel_dp_detect], [CONNECTOR:29:DP-3]
[  109.196160] [drm:intel_hpd_irq_event], [CONNECTOR:29:DP-3] status updated from 1 to 2
[  109.198088] hid-generic 0003:08BB:2900.0007: can't reset device, 0000:00:1a.0-1.5.6.2/input3, status -71
[  109.198273] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[  109.198283] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[  109.198289] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1]
[  109.198314] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[  109.198320] [drm:drm_mode_debug_printmodeline], Modeline 10:"1440x900" 60 106890 1440 1488 1520 1924 900 903 909 926 0x48 0xa
[  109.198329] [drm:drm_mode_debug_printmodeline], Modeline 11:"1440x900" 50 89260 1440 1488 1520 1740 900 903 909 1026 0x40 0xa
[  109.198341] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[  109.198636] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[  109.198643] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[  109.198651] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[  109.198656] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1
[  109.198661] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[  109.198665] [drm:intel_crt_detect], CRT not detected via hotplug
[  109.198701] usb 1-1.5.6: clear tt 1 (0090) error -71
[  109.198846] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[  109.198854] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[  109.198859] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[  109.198862] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[  109.199177] usb 1-1.5: clear tt 4 (0070) error -71
[  109.199333] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[  109.199340] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[  109.199345] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[  109.199350] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[  109.199370] [drm:drm_mode_getconnector], 
[  109.199374] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[  109.199381] [CONNECTOR:17:?]
[  109.199385] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[  109.199391] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1]
[  109.202662] usb 1-1.5.6: clear tt 3 (00b0) error -71
[  109.202727] hid-generic 0003:046D:C025.0006: can't reset device, 0000:00:1a.0-1.5.6.1/input0, status -71
[  109.203328] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.206712] hid-generic 0003:0430:0005.0008: can't reset device, 0000:00:1a.0-1.5.6.3/input0, status -71
[  109.206925] usb 1-1.5.6: clear tt 2 (00a0) error -71
[  109.207301] usb 1-1.5: clear tt 4 (0070) error -71
[  109.211180] usb 1-1.5.6: clear tt 1 (0090) error -71
[  109.211471] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.212171] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[  109.212178] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[  109.212199] [drm:intel_dp_detect], 
[  109.212201] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[  109.212206] [CONNECTOR:29:DP-3]
[  109.212212] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[  109.212216] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[  109.212222] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[  109.212229] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[  109.212233] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[  109.212236] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
[  109.212470] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  109.212477] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  109.212481] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[  109.212496] [drm:drm_mode_getconnector], 
[  109.212498] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1]
[  109.212501] [CONNECTOR:25:?]
[  109.215402] usb 1-1.5: clear tt 4 (0070) error -71
[  109.216053] hid-generic 0003:08BB:2900.0007: can't reset device, 0000:00:1a.0-1.5.6.2/input3, status -71
[  109.223424] usb 1-1.5: clear tt 4 (0070) error -71
[  109.228231] usb 1-1.5.6: clear tt 3 (00b0) error -71
[  109.228244] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[  109.228272] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[  109.228279] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-3]
[  109.228337] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.228372] hid-generic 0003:046D:C025.0006: can't reset device, 0000:00:1a.0-1.5.6.1/input0, status -71
[  109.228503] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[  109.228508] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[  109.228515] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[  109.228535] [drm:drm_mode_getconnector], 
[  109.228538] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
[  109.228543] [CONNECTOR:27:?]
[  109.228707] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  109.228714] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  109.228731] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[  109.228748] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[  109.228755] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[  109.228776] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[  109.228783] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[  109.228790] [drm:intel_dp_detect], [CONNECTOR:29:DP-3]
[  109.228796] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
[  109.228809] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-3]
[  109.228982] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[  109.228989] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[  109.229044] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1]
[  109.229087] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1
[  109.229095] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[  109.229100] [drm:intel_crt_detect], CRT not detected via hotplug
[  109.229265] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[  109.229269] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[  109.229271] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[  109.229272] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[  109.229637] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[  109.229640] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[  109.229642] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[  109.232299] usb 1-1.5.6: clear tt 1 (0090) error -71
[  109.232524] hid-generic 0003:0430:0005.0008: can't reset device, 0000:00:1a.0-1.5.6.3/input0, status -71
[  109.236135] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.236521] usb 1-1.5.6: clear tt 2 (00a0) error -71
[  109.236900] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[  109.236906] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1]
[  109.236910] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1]
[  109.236926] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:7:LVDS-1] probed modes :
[  109.236929] [drm:drm_mode_debug_printmodeline], Modeline 10:"1440x900" 60 106890 1440 1488 1520 1924 900 903 909 926 0x48 0xa
[  109.236933] [drm:drm_mode_debug_printmodeline], Modeline 11:"1440x900" 50 89260 1440 1488 1520 1740 900 903 909 1026 0x40 0xa
[  109.236939] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[  109.237103] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[  109.237106] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1]
[  109.237109] [drm:intel_crt_detect], [CONNECTOR:14:VGA-1] force=1
[  109.237114] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[  109.237116] [drm:intel_crt_detect], CRT not detected via hotplug
[  109.237288] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[  109.237293] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[  109.237296] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[  109.237298] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[  109.237664] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[  109.237666] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[  109.237668] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[  109.237671] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:VGA-1] disconnected
[  109.237680] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
[  109.237683] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1]
[  109.237686] [drm:intel_hdmi_detect], [CONNECTOR:17:HDMI-A-1]
[  109.240167] usb 1-1.5: clear tt 4 (0070) error -71
[  109.241039] usb 1-1.5.6: clear tt 3 (00b0) error -71
[  109.245050] usb 1-1.5.6: clear tt 2 (00a0) error -71
[  109.252210] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[  109.252223] hid-generic 0003:08BB:2900.0007: can't reset device, 0000:00:1a.0-1.5.6.2/input3, status -71
[  109.252230] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:HDMI-A-1] disconnected
[  109.252243] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[  109.252249] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[  109.252253] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[  109.252259] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[  109.252264] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[  109.252268] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2]
[  109.252272] [drm:intel_hdmi_detect], [CONNECTOR:23:HDMI-A-2]
[  109.252453] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  109.252460] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[  109.252465] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-2] disconnected
[  109.252476] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[  109.252480] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3]
[  109.252484] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-3]
[  109.252689] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[  109.252695] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[  109.252699] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-3] disconnected
[  109.252709] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[  109.252713] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[  109.252716] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[  109.252721] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[  109.252726] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[  109.252730] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[  109.252733] [drm:intel_dp_detect], [CONNECTOR:29:DP-3]
[  109.252738] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
[  109.256608] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.256631] hid-generic 0003:0430:0005.0008: can't reset device, 0000:00:1a.0-1.5.6.3/input0, status -71
[  109.267005] hid-generic 0003:046D:C025.0006: can't reset device, 0000:00:1a.0-1.5.6.1/input0, status -71
[  109.271100] hid-generic 0003:08BB:2900.0007: can't reset device, 0000:00:1a.0-1.5.6.2/input3, status -71
[  109.271116] usb 1-1.5: clear tt 4 (0070) error -71
[  109.271129] usb 1-1.5.6: clear tt 3 (00b0) error -71
[  109.275303] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.275795] usb 1-1.5.6: clear tt 1 (0090) error -71
[  109.275812] hid-generic 0003:0430:0005.0008: can't reset device, 0000:00:1a.0-1.5.6.3/input0, status -71
[  109.281041] thinkpad_acpi: undocked from hotplug port replicator
[  109.281910] [drm:asle_set_backlight], bclp = 0x80000003
[  109.281919] [drm:intel_panel_get_max_backlight], max backlight PWM = 4437
[  109.281923] [drm:asle_set_pwm_freq], PWM freq is not supported
[  109.282417] usb 1-1.5.6: clear tt 2 (00a0) error -71
[  109.282439] usb 1-1.5: clear tt 4 (0070) error -71
[  109.284813] hid-generic 0003:046D:C025.0006: can't reset device, 0000:00:1a.0-1.5.6.1/input0, status -71
[  109.286512] usb 1-1.5.6: clear tt 3 (00b0) error -71
[  109.286559] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.288325] hid-generic 0003:08BB:2900.0007: can't reset device, 0000:00:1a.0-1.5.6.2/input3, status -71
[  109.290530] usb 1-1.5: clear tt 4 (0070) error -71
[  109.290554] hid-generic 0003:0430:0005.0008: can't reset device, 0000:00:1a.0-1.5.6.3/input0, status -71
[  109.290901] usb 1-1.5.6: clear tt 1 (0090) error -71
[  109.294634] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.295275] usb 1-1.5.6: clear tt 2 (00a0) error -71
[  109.298664] usb 1-1.5: clear tt 4 (0070) error -71
[  109.299537] usb 1-1.5.6: clear tt 3 (00b0) error -71
[  109.300045] hid-generic 0003:046D:C025.0006: can't reset device, 0000:00:1a.0-1.5.6.1/input0, status -71
[  109.302734] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.304055] hid-generic 0003:08BB:2900.0007: can't reset device, 0000:00:1a.0-1.5.6.2/input3, status -71
[  109.304060] usb 1-1.5.6: clear tt 1 (0090) error -71
[  109.305052] hid-generic 0003:0430:0005.0008: can't reset device, 0000:00:1a.0-1.5.6.3/input0, status -71
[  109.306666] usb 1-1.5: clear tt 4 (0070) error -71
[  109.308542] usb 1-1.5.6: clear tt 2 (00a0) error -71
[  109.310716] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.312791] usb 1-1.5.6: clear tt 3 (00b0) error -71
[  109.314664] usb 1-1.5: clear tt 4 (0070) error -71
[  109.316058] hid-generic 0003:046D:C025.0006: can't reset device, 0000:00:1a.0-1.5.6.1/input0, status -71
[  109.316805] hid-generic 0003:0430:0005.0008: can't reset device, 0000:00:1a.0-1.5.6.3/input0, status -71
[  109.318735] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.320055] hid-generic 0003:08BB:2900.0007: can't reset device, 0000:00:1a.0-1.5.6.2/input3, status -71
[  109.320060] usb 1-1.5.6: clear tt 1 (0090) error -71
[  109.322666] usb 1-1.5: clear tt 4 (0070) error -71
[  109.324543] usb 1-1.5.6: clear tt 3 (00b0) error -71
[  109.326734] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.328555] hid-generic 0003:0430:0005.0008: can't reset device, 0000:00:1a.0-1.5.6.3/input0, status -71
[  109.328790] usb 1-1.5.6: clear tt 2 (00a0) error -71
[  109.330669] usb 1-1.5: clear tt 4 (0070) error -71
[  109.332057] hid-generic 0003:046D:C025.0006: can't reset device, 0000:00:1a.0-1.5.6.1/input0, status -71
[  109.333040] usb 1-1.5.6: clear tt 3 (00b0) error -71
[  109.334716] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.336054] hid-generic 0003:08BB:2900.0007: can't reset device, 0000:00:1a.0-1.5.6.2/input3, status -71
[  109.337295] usb 1-1.5.6: clear tt 1 (0090) error -71
[  109.337434] hid-generic 0003:0430:0005.0008: can't reset device, 0000:00:1a.0-1.5.6.3/input0, status -71
[  109.338668] usb 1-1.5: clear tt 4 (0070) error -71
[  109.341545] usb 1-1.5.6: clear tt 2 (00a0) error -71
[  109.342719] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.345793] usb 1-1.5.6: clear tt 3 (00b0) error -71
[  109.346669] usb 1-1.5: clear tt 4 (0070) error -71
[  109.348066] hid-generic 0003:046D:C025.0006: can't reset device, 0000:00:1a.0-1.5.6.1/input0, status -71
[  109.349814] hid-generic 0003:0430:0005.0008: can't reset device, 0000:00:1a.0-1.5.6.3/input0, status -71
[  109.350741] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.352058] hid-generic 0003:08BB:2900.0007: can't reset device, 0000:00:1a.0-1.5.6.2/input3, status -71
[  109.352064] usb 1-1.5.6: clear tt 1 (0090) error -71
[  109.354671] usb 1-1.5: clear tt 4 (0070) error -71
[  109.356547] usb 1-1.5.6: clear tt 3 (00b0) error -71
[  109.358740] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.360795] usb 1-1.5.6: clear tt 2 (00a0) error -71
[  109.361438] hid-generic 0003:0430:0005.0008: can't reset device, 0000:00:1a.0-1.5.6.3/input0, status -71
[  109.362668] usb 1-1.5: clear tt 4 (0070) error -71
[  109.364063] hid-generic 0003:046D:C025.0006: can't reset device, 0000:00:1a.0-1.5.6.1/input0, status -71
[  109.365426] usb 1-1.5.6: clear tt 3 (00b0) error -71
[  109.366723] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.368059] hid-generic 0003:08BB:2900.0007: can't reset device, 0000:00:1a.0-1.5.6.2/input3, status -71
[  109.369434] hid-generic 0003:0430:0005.0008: can't reset device, 0000:00:1a.0-1.5.6.3/input0, status -71
[  109.369671] usb 1-1.5.6: clear tt 1 (0090) error -71
[  109.370670] usb 1-1.5: clear tt 4 (0070) error -71
[  109.373919] usb 1-1.5.6: clear tt 2 (00a0) error -71
[  109.374726] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.378158] usb 1-1.5.6: clear tt 3 (00b0) error -71
[  109.378672] usb 1-1.5: clear tt 4 (0070) error -71
[  109.380071] hid-generic 0003:046D:C025.0006: can't reset device, 0000:00:1a.0-1.5.6.1/input0, status -71
[  109.382194] hid-generic 0003:0430:0005.0008: can't reset device, 0000:00:1a.0-1.5.6.3/input0, status -71
[  109.382722] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.384085] hid-generic 0003:08BB:2900.0007: can't reset device, 0000:00:1a.0-1.5.6.2/input3, status -71
[  109.384095] usb 1-1.5.6: clear tt 1 (0090) error -71
[  109.386687] usb 1-1.5: clear tt 4 (0070) error -71
[  109.388559] usb 1-1.5.6: clear tt 3 (00b0) error -71
[  109.390768] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.392794] usb 1-1.5.6: clear tt 2 (00a0) error -71
[  109.393436] hid-generic 0003:0430:0005.0008: can't reset device, 0000:00:1a.0-1.5.6.3/input0, status -71
[  109.394791] usb 1-1.5: clear tt 4 (0070) error -71
[  109.396097] hid-generic 0003:046D:C025.0006: can't reset device, 0000:00:1a.0-1.5.6.1/input0, status -71
[  109.396817] hid-generic 0003:08BB:2900.0007: can't reset device, 0000:00:1a.0-1.5.6.2/input3, status -71
[  109.397427] usb 1-1.5.6: clear tt 3 (00b0) error -71
[  109.398895] logitech-djreceiver 0003:046D:C52B.0003: can't reset device, 0000:00:1a.0-1.5.4/input2, status -71
[  109.400430] usb 1-1.5: USB disconnect, device number 5
[  109.400433] usb 1-1.5.4: USB disconnect, device number 7
[  109.402342] usb 1-1.5.6: clear tt 1 (0090) error -71
[  109.403258] hid-generic 0003:0430:0005.0008: can't reset device, 0000:00:1a.0-1.5.6.3/input0, status -71
[  109.403337] usb 1-1.5: clear tt 4 (0070) error -71
[  109.492954] e1000e: eth0 NIC Link is Down
[  109.497593] usb 1-1.5.6: USB disconnect, device number 8
[  109.497599] usb 1-1.5.6.1: USB disconnect, device number 9
[  109.544934] usb 1-1.5.6.2: USB disconnect, device number 10
[  109.580911] usb 1-1.5.6.3: USB disconnect, device number 11
[  109.820361] init: anacron main process (1337) killed by TERM signal
[  109.883878] thinkpad_acpi: EC reports that Thermal Table has changed
[  113.261714] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  113.261729] pci 0000:00:1e.0: PCI bridge to [bus 0e]
[  113.262092] [drm:intel_lvds_detect], [CONNECTOR:7:LVDS-1]
[  113.263223] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
[  113.263234] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
[  113.263245] [drm:intel_modeset_readout_hw_state], PCH DPLL A hw state readout: refcount 1, on 1
[  113.263255] [drm:intel_modeset_readout_hw_state], PCH DPLL B hw state readout: refcount 0, on 0
[  113.263265] [drm:intel_modeset_readout_hw_state], [ENCODER:8:LVDS-8] hw state readout: disabled, pipe=0
[  113.263273] [drm:intel_modeset_readout_hw_state], [ENCODER:15:DAC-15] hw state readout: disabled, pipe=0
[  113.263282] [drm:intel_modeset_readout_hw_state], [ENCODER:16:TMDS-16] hw state readout: disabled, pipe=0
[  113.263291] [drm:intel_modeset_readout_hw_state], [ENCODER:20:TMDS-20] hw state readout: disabled, pipe=0
[  113.263300] [drm:intel_modeset_readout_hw_state], [ENCODER:22:TMDS-22] hw state readout: disabled, pipe=0
[  113.263308] [drm:intel_modeset_readout_hw_state], [ENCODER:24:TMDS-24] hw state readout: disabled, pipe=0
[  113.263316] [drm:intel_modeset_readout_hw_state], [ENCODER:26:TMDS-26] hw state readout: disabled, pipe=0
[  113.263324] [drm:intel_modeset_readout_hw_state], [ENCODER:28:TMDS-28] hw state readout: disabled, pipe=0
[  113.263335] [drm:intel_modeset_readout_hw_state], [CONNECTOR:7:LVDS-1] hw state readout: disabled
[  113.263343] [drm:intel_modeset_readout_hw_state], [CONNECTOR:14:VGA-1] hw state readout: disabled
[  113.263352] [drm:intel_modeset_readout_hw_state], [CONNECTOR:17:HDMI-A-1] hw state readout: disabled
[  113.263360] [drm:intel_modeset_readout_hw_state], [CONNECTOR:21:DP-1] hw state readout: disabled
[  113.263368] [drm:intel_modeset_readout_hw_state], [CONNECTOR:23:HDMI-A-2] hw state readout: disabled
[  113.263376] [drm:intel_modeset_readout_hw_state], [CONNECTOR:25:HDMI-A-3] hw state readout: disabled
[  113.263384] [drm:intel_modeset_readout_hw_state], [CONNECTOR:27:DP-2] hw state readout: disabled
[  113.263392] [drm:intel_modeset_readout_hw_state], [CONNECTOR:29:DP-3] hw state readout: disabled
[  113.276911] [drm:drm_mode_getconnector], [CONNECTOR:7:?]
[  145.042220] wlan0: authenticate with 54:3d:37:40:46:b8
[  145.047136] wlan0: send auth to 54:3d:37:40:46:b8 (try 1/3)
[  145.049760] cfg80211: Calling CRDA to update world regulatory domain
[  145.054277] cfg80211: World regulatory domain updated:
[  145.054284] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  145.054288] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  145.054292] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  145.054295] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  145.054298] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  145.054301] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  145.231899] wlan0: send auth to 54:3d:37:40:46:b8 (try 2/3)
[  145.373585] wlan0: send auth to 54:3d:37:40:46:b8 (try 3/3)
[  145.378279] wlan0: authenticated
[  146.033536] wlan0: authenticate with c4:10:8a:57:bc:18
[  146.048174] wlan0: send auth to c4:10:8a:57:bc:18 (try 1/3)
[  146.158171] wlan0: send auth to c4:10:8a:57:bc:18 (try 2/3)
[  146.160689] wlan0: authenticated
[  146.162166] wlan0: associate with c4:10:8a:57:bc:18 (try 1/3)
[  146.167895] wlan0: RX AssocResp from c4:10:8a:57:bc:18 (capab=0x431 status=0 aid=3)
[  146.171232] wlan0: associated
[  166.533963] wlan0: authenticate with 54:3d:37:40:46:b8
[  166.537440] wlan0: send auth to 54:3d:37:40:46:b8 (try 1/3)
[  166.539443] cfg80211: Calling CRDA to update world regulatory domain
[  166.543512] cfg80211: World regulatory domain updated:
[  166.543517] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  166.543520] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  166.543522] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  166.543525] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  166.543527] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  166.543529] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  166.717149] wlan0: send auth to 54:3d:37:40:46:b8 (try 2/3)
[  166.719018] wlan0: authenticated
[  166.878285] wlan0: authenticate with c4:10:8a:56:4d:d8
[  166.890578] wlan0: send auth to c4:10:8a:56:4d:d8 (try 1/3)
[  166.892268] wlan0: authenticated
[  166.894549] wlan0: associate with c4:10:8a:56:4d:d8 (try 1/3)
[  166.904922] wlan0: RX AssocResp from c4:10:8a:56:4d:d8 (capab=0x431 status=0 aid=3)
[  166.907770] wlan0: associated
[  240.950773] INFO: task Xorg:1431 blocked for more than 120 seconds.
[  240.950782]       Tainted: G        W    3.12.0-999-generic #201310070425
[  240.950784] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  240.950787] Xorg            D 0000000000000000     0  1431   1390 0x00400004
[  240.950793]  ffff8800b1b07c48 0000000000000086 0000000000000002 0000000000000000
[  240.950799]  ffff8800b1b07fd8 ffff8800b1b07fd8 ffff8800b1b07fd8 00000000000144c0
[  240.950803]  ffff88022f998000 ffff88022a942f40 ffff880036354001 ffff880036354330
[  240.950808] Call Trace:
[  240.950822]  [<ffffffff81753619>] schedule+0x29/0x70
[  240.950827]  [<ffffffff8175394e>] schedule_preempt_disabled+0xe/0x10
[  240.950833]  [<ffffffff817518c4>] __mutex_lock_slowpath+0x114/0x1b0
[  240.950863]  [<ffffffff81751983>] mutex_lock+0x23/0x40
[  240.950888]  [<ffffffffa0054582>] drm_mode_getconnector+0xb2/0x430 [drm]
[  240.950906]  [<ffffffffa0044f1a>] drm_ioctl+0x4fa/0x620 [drm]
[  240.950926]  [<ffffffffa00544d0>] ? drm_mode_getcrtc+0xe0/0xe0 [drm]
[  240.950933]  [<ffffffff811cedda>] do_vfs_ioctl+0x7a/0x2e0
[  240.950939]  [<ffffffff811bcc01>] ? vfs_read+0x111/0x180
[  240.950943]  [<ffffffff811cf0d1>] SyS_ioctl+0x91/0xb0
[  240.950947]  [<ffffffff811bce40>] ? SyS_read+0x70/0xa0
[  240.950952]  [<ffffffff8175e06d>] system_call_fastpath+0x1a/0x1f
[  240.951008] INFO: task kworker/0:2:3460 blocked for more than 120 seconds.
[  240.951011]       Tainted: G        W    3.12.0-999-generic #201310070425
[  240.951012] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  240.951014] kworker/0:2     D 0000000000000000     0  3460      2 0x00000000
[  240.951024] Workqueue: kacpi_notify acpi_os_execute_deferred
[  240.951026]  ffff8800a1289ae8 0000000000000046 000000000000002e 00000000ffffffff
[  240.951031]  ffff8800a1289fd8 ffff8800a1289fd8 ffff8800a1289fd8 00000000000144c0
[  240.951035]  ffff88022f91c6e0 ffff88022d4d17a0 0000000000000286 ffff88022f516000
[  240.951039] Call Trace:
[  240.951045]  [<ffffffff81753619>] schedule+0x29/0x70
[  240.951077]  [<ffffffffa0125b9d>] intel_crtc_wait_for_pending_flips+0x8d/0x120 [i915]
[  240.951087]  [<ffffffff8108cc30>] ? add_wait_queue+0x60/0x60
[  240.951111]  [<ffffffffa012ebaf>] ironlake_crtc_disable+0x7f/0x2a0 [i915]
[  240.951135]  [<ffffffffa01310f6>] intel_crtc_update_dpms+0x76/0xb0 [i915]
[  240.951159]  [<ffffffffa01348e5>] intel_sanitize_crtc+0xd5/0x370 [i915]
[  240.951183]  [<ffffffffa01351ed>] intel_modeset_setup_hw_state+0x17d/0x380 [i915]
[  240.951208]  [<ffffffffa01377a1>] intel_lid_notify+0xc1/0x100 [i915]
[  240.951213]  [<ffffffff817596ad>] notifier_call_chain+0x4d/0x70
[  240.951218]  [<ffffffff81091ea8>] __blocking_notifier_call_chain+0x58/0x80
[  240.951222]  [<ffffffff81091ee6>] blocking_notifier_call_chain+0x16/0x20
[  240.951228]  [<ffffffff8142b15b>] acpi_lid_send_state+0x86/0xaf
[  240.951233]  [<ffffffff8142b1e1>] acpi_button_notify+0x3b/0xa2
[  240.951237]  [<ffffffff814032f1>] acpi_device_notify+0x19/0x1b
[  240.951242]  [<ffffffff814131cd>] acpi_ev_notify_dispatch+0x41/0x5c
[  240.951246]  [<ffffffff813ff59e>] acpi_os_execute_deferred+0x25/0x32
[  240.951250]  [<ffffffff81083ccf>] process_one_work+0x17f/0x4d0
[  240.951254]  [<ffffffff81084f0b>] worker_thread+0x11b/0x3d0
[  240.951258]  [<ffffffff81084df0>] ? manage_workers.isra.20+0x1b0/0x1b0
[  240.951263]  [<ffffffff8108c0d0>] kthread+0xc0/0xd0
[  240.951267]  [<ffffffff8108c010>] ? flush_kthread_worker+0xb0/0xb0
[  240.951271]  [<ffffffff8175dfbc>] ret_from_fork+0x7c/0xb0
[  240.951275]  [<ffffffff8108c010>] ? flush_kthread_worker+0xb0/0xb0
[  361.016462] INFO: task Xorg:1431 blocked for more than 120 seconds.
[  361.016472]       Tainted: G        W    3.12.0-999-generic #201310070425
[  361.016474] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  361.016478] Xorg            D 0000000000000000     0  1431   1390 0x00400004
[  361.016485]  ffff8800b1b07c48 0000000000000086 0000000000000002 0000000000000000
[  361.016491]  ffff8800b1b07fd8 ffff8800b1b07fd8 ffff8800b1b07fd8 00000000000144c0
[  361.016497]  ffff88022f998000 ffff88022a942f40 ffff880036354001 ffff880036354330
[  361.016502] Call Trace:
[  361.016518]  [<ffffffff81753619>] schedule+0x29/0x70
[  361.016524]  [<ffffffff8175394e>] schedule_preempt_disabled+0xe/0x10
[  361.016530]  [<ffffffff817518c4>] __mutex_lock_slowpath+0x114/0x1b0
[  361.016562]  [<ffffffff81751983>] mutex_lock+0x23/0x40
[  361.016588]  [<ffffffffa0054582>] drm_mode_getconnector+0xb2/0x430 [drm]
[  361.016608]  [<ffffffffa0044f1a>] drm_ioctl+0x4fa/0x620 [drm]
[  361.016631]  [<ffffffffa00544d0>] ? drm_mode_getcrtc+0xe0/0xe0 [drm]
[  361.016639]  [<ffffffff811cedda>] do_vfs_ioctl+0x7a/0x2e0
[  361.016647]  [<ffffffff811bcc01>] ? vfs_read+0x111/0x180
[  361.016651]  [<ffffffff811cf0d1>] SyS_ioctl+0x91/0xb0
[  361.016656]  [<ffffffff811bce40>] ? SyS_read+0x70/0xa0
[  361.016662]  [<ffffffff8175e06d>] system_call_fastpath+0x1a/0x1f
[  361.016721] INFO: task kworker/0:2:3460 blocked for more than 120 seconds.
[  361.016724]       Tainted: G        W    3.12.0-999-generic #201310070425
[  361.016726] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  361.016729] kworker/0:2     D 0000000000000000     0  3460      2 0x00000000
[  361.016740] Workqueue: kacpi_notify acpi_os_execute_deferred
[  361.016743]  ffff8800a1289ae8 0000000000000046 000000000000002e 00000000ffffffff
[  361.016748]  ffff8800a1289fd8 ffff8800a1289fd8 ffff8800a1289fd8 00000000000144c0
[  361.016753]  ffff88022f91c6e0 ffff88022d4d17a0 0000000000000286 ffff88022f516000
[  361.016758] Call Trace:
[  361.016764]  [<ffffffff81753619>] schedule+0x29/0x70
[  361.016801]  [<ffffffffa0125b9d>] intel_crtc_wait_for_pending_flips+0x8d/0x120 [i915]
[  361.016811]  [<ffffffff8108cc30>] ? add_wait_queue+0x60/0x60
[  361.016841]  [<ffffffffa012ebaf>] ironlake_crtc_disable+0x7f/0x2a0 [i915]
[  361.016870]  [<ffffffffa01310f6>] intel_crtc_update_dpms+0x76/0xb0 [i915]
[  361.016899]  [<ffffffffa01348e5>] intel_sanitize_crtc+0xd5/0x370 [i915]
[  361.016929]  [<ffffffffa01351ed>] intel_modeset_setup_hw_state+0x17d/0x380 [i915]
[  361.016958]  [<ffffffffa01377a1>] intel_lid_notify+0xc1/0x100 [i915]
[  361.016964]  [<ffffffff817596ad>] notifier_call_chain+0x4d/0x70
[  361.016972]  [<ffffffff81091ea8>] __blocking_notifier_call_chain+0x58/0x80
[  361.016977]  [<ffffffff81091ee6>] blocking_notifier_call_chain+0x16/0x20
[  361.016985]  [<ffffffff8142b15b>] acpi_lid_send_state+0x86/0xaf
[  361.016991]  [<ffffffff8142b1e1>] acpi_button_notify+0x3b/0xa2
[  361.016996]  [<ffffffff814032f1>] acpi_device_notify+0x19/0x1b
[  361.017004]  [<ffffffff814131cd>] acpi_ev_notify_dispatch+0x41/0x5c
[  361.017009]  [<ffffffff813ff59e>] acpi_os_execute_deferred+0x25/0x32
[  361.017014]  [<ffffffff81083ccf>] process_one_work+0x17f/0x4d0
[  361.017019]  [<ffffffff81084f0b>] worker_thread+0x11b/0x3d0
[  361.017024]  [<ffffffff81084df0>] ? manage_workers.isra.20+0x1b0/0x1b0
[  361.017029]  [<ffffffff8108c0d0>] kthread+0xc0/0xd0
[  361.017034]  [<ffffffff8108c010>] ? flush_kthread_worker+0xb0/0xb0
[  361.017039]  [<ffffffff8175dfbc>] ret_from_fork+0x7c/0xb0
[  361.017044]  [<ffffffff8108c010>] ? flush_kthread_worker+0xb0/0xb0
[  481.031342] INFO: task Xorg:1431 blocked for more than 120 seconds.
[  481.031351]       Tainted: G        W    3.12.0-999-generic #201310070425
[  481.031353] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  481.031357] Xorg            D 0000000000000000     0  1431   1390 0x00400004
[  481.031365]  ffff8800b1b07c48 0000000000000086 0000000000000002 0000000000000000
[  481.031371]  ffff8800b1b07fd8 ffff8800b1b07fd8 ffff8800b1b07fd8 00000000000144c0
[  481.031376]  ffff88022f998000 ffff88022a942f40 ffff880036354001 ffff880036354330
[  481.031382] Call Trace:
[  481.031397]  [<ffffffff81753619>] schedule+0x29/0x70
[  481.031404]  [<ffffffff8175394e>] schedule_preempt_disabled+0xe/0x10
[  481.031410]  [<ffffffff817518c4>] __mutex_lock_slowpath+0x114/0x1b0
[  481.031442]  [<ffffffff81751983>] mutex_lock+0x23/0x40
[  481.031469]  [<ffffffffa0054582>] drm_mode_getconnector+0xb2/0x430 [drm]
[  481.031489]  [<ffffffffa0044f1a>] drm_ioctl+0x4fa/0x620 [drm]
[  481.031513]  [<ffffffffa00544d0>] ? drm_mode_getcrtc+0xe0/0xe0 [drm]
[  481.031521]  [<ffffffff811cedda>] do_vfs_ioctl+0x7a/0x2e0
[  481.031528]  [<ffffffff811bcc01>] ? vfs_read+0x111/0x180
[  481.031533]  [<ffffffff811cf0d1>] SyS_ioctl+0x91/0xb0
[  481.031538]  [<ffffffff811bce40>] ? SyS_read+0x70/0xa0
[  481.031544]  [<ffffffff8175e06d>] system_call_fastpath+0x1a/0x1f
[  481.031600] INFO: task kworker/0:2:3460 blocked for more than 120 seconds.
[  481.031604]       Tainted: G        W    3.12.0-999-generic #201310070425
[  481.031606] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  481.031608] kworker/0:2     D 0000000000000000     0  3460      2 0x00000000
[  481.031619] Workqueue: kacpi_notify acpi_os_execute_deferred
[  481.031622]  ffff8800a1289ae8 0000000000000046 000000000000002e 00000000ffffffff
[  481.031627]  ffff8800a1289fd8 ffff8800a1289fd8 ffff8800a1289fd8 00000000000144c0
[  481.031632]  ffff88022f91c6e0 ffff88022d4d17a0 0000000000000286 ffff88022f516000
[  481.031638] Call Trace:
[  481.031644]  [<ffffffff81753619>] schedule+0x29/0x70
[  481.031681]  [<ffffffffa0125b9d>] intel_crtc_wait_for_pending_flips+0x8d/0x120 [i915]
[  481.031691]  [<ffffffff8108cc30>] ? add_wait_queue+0x60/0x60
[  481.031721]  [<ffffffffa012ebaf>] ironlake_crtc_disable+0x7f/0x2a0 [i915]
[  481.031750]  [<ffffffffa01310f6>] intel_crtc_update_dpms+0x76/0xb0 [i915]
[  481.031779]  [<ffffffffa01348e5>] intel_sanitize_crtc+0xd5/0x370 [i915]
[  481.031809]  [<ffffffffa01351ed>] intel_modeset_setup_hw_state+0x17d/0x380 [i915]
[  481.031839]  [<ffffffffa01377a1>] intel_lid_notify+0xc1/0x100 [i915]
[  481.031845]  [<ffffffff817596ad>] notifier_call_chain+0x4d/0x70
[  481.031852]  [<ffffffff81091ea8>] __blocking_notifier_call_chain+0x58/0x80
[  481.031857]  [<ffffffff81091ee6>] blocking_notifier_call_chain+0x16/0x20
[  481.031864]  [<ffffffff8142b15b>] acpi_lid_send_state+0x86/0xaf
[  481.031869]  [<ffffffff8142b1e1>] acpi_button_notify+0x3b/0xa2
[  481.031874]  [<ffffffff814032f1>] acpi_device_notify+0x19/0x1b
[  481.031880]  [<ffffffff814131cd>] acpi_ev_notify_dispatch+0x41/0x5c
[  481.031885]  [<ffffffff813ff59e>] acpi_os_execute_deferred+0x25/0x32
[  481.031890]  [<ffffffff81083ccf>] process_one_work+0x17f/0x4d0
[  481.031895]  [<ffffffff81084f0b>] worker_thread+0x11b/0x3d0
[  481.031899]  [<ffffffff81084df0>] ? manage_workers.isra.20+0x1b0/0x1b0
[  481.031905]  [<ffffffff8108c0d0>] kthread+0xc0/0xd0
[  481.031910]  [<ffffffff8108c010>] ? flush_kthread_worker+0xb0/0xb0
[  481.031915]  [<ffffffff8175dfbc>] ret_from_fork+0x7c/0xb0
[  481.031920]  [<ffffffff8108c010>] ? flush_kthread_worker+0xb0/0xb0
[  601.034228] INFO: task Xorg:1431 blocked for more than 120 seconds.
[  601.034237]       Tainted: G        W    3.12.0-999-generic #201310070425
[  601.034239] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  601.034242] Xorg            D 0000000000000000     0  1431   1390 0x00400004
[  601.034248]  ffff8800b1b07c48 0000000000000086 0000000000000002 0000000000000000
[  601.034254]  ffff8800b1b07fd8 ffff8800b1b07fd8 ffff8800b1b07fd8 00000000000144c0
[  601.034258]  ffff88022f998000 ffff88022a942f40 ffff880036354001 ffff880036354330
[  601.034262] Call Trace:
[  601.034276]  [<ffffffff81753619>] schedule+0x29/0x70
[  601.034282]  [<ffffffff8175394e>] schedule_preempt_disabled+0xe/0x10
[  601.034287]  [<ffffffff817518c4>] __mutex_lock_slowpath+0x114/0x1b0
[  601.034316]  [<ffffffff81751983>] mutex_lock+0x23/0x40
[  601.034341]  [<ffffffffa0054582>] drm_mode_getconnector+0xb2/0x430 [drm]
[  601.034358]  [<ffffffffa0044f1a>] drm_ioctl+0x4fa/0x620 [drm]
[  601.034377]  [<ffffffffa00544d0>] ? drm_mode_getcrtc+0xe0/0xe0 [drm]
[  601.034385]  [<ffffffff811cedda>] do_vfs_ioctl+0x7a/0x2e0
[  601.034391]  [<ffffffff811bcc01>] ? vfs_read+0x111/0x180
[  601.034395]  [<ffffffff811cf0d1>] SyS_ioctl+0x91/0xb0
[  601.034399]  [<ffffffff811bce40>] ? SyS_read+0x70/0xa0
[  601.034404]  [<ffffffff8175e06d>] system_call_fastpath+0x1a/0x1f
[  601.034459] INFO: task kworker/0:2:3460 blocked for more than 120 seconds.
[  601.034462]       Tainted: G        W    3.12.0-999-generic #201310070425
[  601.034463] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  601.034465] kworker/0:2     D 0000000000000000     0  3460      2 0x00000000
[  601.034475] Workqueue: kacpi_notify acpi_os_execute_deferred
[  601.034477]  ffff8800a1289ae8 0000000000000046 000000000000002e 00000000ffffffff
[  601.034482]  ffff8800a1289fd8 ffff8800a1289fd8 ffff8800a1289fd8 00000000000144c0
[  601.034486]  ffff88022f91c6e0 ffff88022d4d17a0 0000000000000286 ffff88022f516000
[  601.034490] Call Trace:
[  601.034496]  [<ffffffff81753619>] schedule+0x29/0x70
[  601.034527]  [<ffffffffa0125b9d>] intel_crtc_wait_for_pending_flips+0x8d/0x120 [i915]
[  601.034536]  [<ffffffff8108cc30>] ? add_wait_queue+0x60/0x60
[  601.034560]  [<ffffffffa012ebaf>] ironlake_crtc_disable+0x7f/0x2a0 [i915]
[  601.034584]  [<ffffffffa01310f6>] intel_crtc_update_dpms+0x76/0xb0 [i915]
[  601.034608]  [<ffffffffa01348e5>] intel_sanitize_crtc+0xd5/0x370 [i915]
[  601.034632]  [<ffffffffa01351ed>] intel_modeset_setup_hw_state+0x17d/0x380 [i915]
[  601.034657]  [<ffffffffa01377a1>] intel_lid_notify+0xc1/0x100 [i915]
[  601.034661]  [<ffffffff817596ad>] notifier_call_chain+0x4d/0x70
[  601.034667]  [<ffffffff81091ea8>] __blocking_notifier_call_chain+0x58/0x80
[  601.034671]  [<ffffffff81091ee6>] blocking_notifier_call_chain+0x16/0x20
[  601.034677]  [<ffffffff8142b15b>] acpi_lid_send_state+0x86/0xaf
[  601.034682]  [<ffffffff8142b1e1>] acpi_button_notify+0x3b/0xa2
[  601.034686]  [<ffffffff814032f1>] acpi_device_notify+0x19/0x1b
[  601.034691]  [<ffffffff814131cd>] acpi_ev_notify_dispatch+0x41/0x5c
[  601.034695]  [<ffffffff813ff59e>] acpi_os_execute_deferred+0x25/0x32
[  601.034699]  [<ffffffff81083ccf>] process_one_work+0x17f/0x4d0
[  601.034703]  [<ffffffff81084f0b>] worker_thread+0x11b/0x3d0
[  601.034707]  [<ffffffff81084df0>] ? manage_workers.isra.20+0x1b0/0x1b0
[  601.034711]  [<ffffffff8108c0d0>] kthread+0xc0/0xd0
[  601.034716]  [<ffffffff8108c010>] ? flush_kthread_worker+0xb0/0xb0
[  601.034719]  [<ffffffff8175dfbc>] ret_from_fork+0x7c/0xb0
[  601.034724]  [<ffffffff8108c010>] ? flush_kthread_worker+0xb0/0xb0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux