This series adds the required DRM, clock, and DT changes required to support the display hardware on Pi5. There are a couple of minor fixes first before the main patches. Many of the patches were authored by Maxime whilst working for us, however there have been a number of fixes squashed into his original patches as issues have been found. I also reworked the way UBM allocations are done to avoid double buffering of the handles as they are quite a limited resource. There are 2 variants of the IP. Most Pi5's released to date have used the C1 step of the SoC, whilst the 2GB Pi5 released in August is using the D0 step, as will other boards in future. Due to various reasons the register map got reworked between the steps, so there is extra code to handle the differences. Which step is in use is read out of the hardware, so they share a compatible string. Thanks! Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx> --- Changes in v2: - Collected Acks and R-b tags - Dropped patch 1 "drm/vc4: Limit max_bpc to 8 on Pi0-3". Already fixed as noted by Maxime. - Fix unintialised var "mux" in vc6_hvs_pv_muxing_commit. - Fixed uninitialised var "reg" in vc4_hvs_cob_init. - Make bcm2712_mop_data and bcm2712_moplet_data static. - Removed the "disable_turbo" line from the struct in raspberrypi_clock_property - I'm confused by the CI error "performing pointer arithmetic on a null pointer has undefined behavior" for PCI_IOBASE as I'm not using it. - Link to v1: https://lore.kernel.org/r/20241023-drm-vc4-2712-support-v1-0-1cc2d5594907@xxxxxxxxxxxxxxx --- Dave Stevenson (11): drm/vc4: Use of_device_get_match_data to set generation drm/vc4: Fix reading of frame count on GEN5 / Pi4 drm/vc4: drv: Add support for 2712 D-step drm/vc4: hvs: Add in support for 2712 D-step. drm/vc4: plane: Add support for 2712 D-step. drm/vc4: hdmi: Support 2712 D-step register map drm/vc4: Enable bg_fill if there are no planes enabled drm/vc4: Drop planes that are completely off-screen or 0 crtc size arm64: dts: broadcom: Add firmware clocks and power nodes to Pi5 DT arm64: dts: broadcom: Add display pipeline support to BCM2712 arm64: dts: broadcom: Add DT for D-step version of BCM2712 Dom Cobley (3): clk: bcm: rpi: Add ISP to exported clocks clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks clk: bcm: rpi: Enable minimize for all firmware clocks Maxime Ripard (22): dt-bindings: display: Add BCM2712 HDMI bindings dt-bindings: display: Add BCM2712 HVS bindings dt-bindings: display: Add BCM2712 PixelValve bindings dt-bindings: display: Add BCM2712 MOP bindings dt-bindings: display: Add BCM2712 MOPLET bindings dt-bindings: display: Add BCM2712 KMS driver bindings drm/vc4: drv: Support BCM2712 drm/vc4: hvs: Add support for BCM2712 HVS drm/vc4: crtc: Add support for BCM2712 PixelValves drm/vc4: hdmi: Add support for BCM2712 HDMI controllers drm/vc4: txp: Introduce structure to deal with revision differences drm/vc4: txp: Rename TXP data structure drm/vc4: txp: Add byte enable toggle bit drm/vc4: txp: Add horizontal and vertical size offset toggle bit drm/vc4: txp: Handle 40-bits DMA Addresses drm/vc4: txp: Move the encoder type in the variant structure drm/vc4: txp: Add a new TXP encoder type drm/vc4: txp: Add support for BCM2712 MOP drm/vc4: txp: Add BCM2712 MOPLET support drm/vc4: Add additional warn_on for incorrect revisions clk: bcm: rpi: Create helper to retrieve private data clk: bcm: rpi: Add disp clock .../bindings/display/brcm,bcm2711-hdmi.yaml | 2 + .../bindings/display/brcm,bcm2835-hvs.yaml | 5 +- .../bindings/display/brcm,bcm2835-pixelvalve0.yaml | 3 + .../bindings/display/brcm,bcm2835-txp.yaml | 5 +- .../bindings/display/brcm,bcm2835-vc4.yaml | 1 + arch/arm64/boot/dts/broadcom/Makefile | 1 + arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dts | 37 + arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 42 + arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 188 +++++ drivers/clk/bcm/clk-raspberrypi.c | 33 +- drivers/gpu/drm/vc4/tests/vc4_mock.c | 8 +- drivers/gpu/drm/vc4/tests/vc4_test_pv_muxing.c | 106 +-- drivers/gpu/drm/vc4/vc4_crtc.c | 96 ++- drivers/gpu/drm/vc4/vc4_drv.c | 19 +- drivers/gpu/drm/vc4/vc4_drv.h | 54 +- drivers/gpu/drm/vc4/vc4_hdmi.c | 107 ++- drivers/gpu/drm/vc4/vc4_hdmi.h | 4 + drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 640 +++++++++++++++ drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 217 ++++++ drivers/gpu/drm/vc4/vc4_hvs.c | 737 ++++++++++++++++-- drivers/gpu/drm/vc4/vc4_kms.c | 105 ++- drivers/gpu/drm/vc4/vc4_plane.c | 866 ++++++++++++++++++++- drivers/gpu/drm/vc4/vc4_regs.h | 297 +++++++ drivers/gpu/drm/vc4/vc4_txp.c | 91 ++- include/soc/bcm2835/raspberrypi-firmware.h | 1 + 25 files changed, 3461 insertions(+), 204 deletions(-) --- base-commit: 3ae80b375739495e36fc6143ff27716fe390a13e change-id: 20241002-drm-vc4-2712-support-9ad3236e3caf Best regards, -- Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
