On Tue, Sep 24, 2024 at 03:36:48PM +0800, Sandor Yu wrote: > Add bindings for Cadence MHDP8501 DisplayPort/HDMI bridge. > > Signed-off-by: Sandor Yu <Sandor.yu@xxxxxxx> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Drop > --- > v16->v17: > - Add lane-mapping property That's a significant change. > > v9->v16: > *No change > > .../display/bridge/cdns,mhdp8501.yaml | 109 ++++++++++++++++++ > 1 file changed, 109 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml > > diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml > new file mode 100644 > index 0000000000000..3f79f328c7425 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml > @@ -0,0 +1,109 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/cdns,mhdp8501.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Cadence MHDP8501 DP/HDMI bridge > + > +maintainers: > + - Sandor Yu <Sandor.yu@xxxxxxx> > + > +description: > + Cadence MHDP8501 DisplayPort/HDMI interface. > + > +properties: > + compatible: > + enum: > + - fsl,imx8mq-mhdp8501 > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + description: MHDP8501 DP/HDMI APB clock. > + > + phys: > + maxItems: 1 > + description: > + phandle to the DP/HDMI PHY > + > + interrupts: > + items: > + - description: Hotplug cable plugin. > + - description: Hotplug cable plugout. > + > + interrupt-names: > + items: > + - const: plug_in > + - const: plug_out > + > + lane-mapping: > + description: lane mapping for HDMI or DisplayPort interface. Where is the definition of this property? I do not see any $ref here, so did you add it to dtschema? Best regards, Krzysztof