Re: [PATCH 3/3] arm64: dts: qcom: sa8775p: Add gpu and gmu nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 23 Sept 2024 at 22:05, Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx> wrote:
>
> On Wed, Sep 18, 2024 at 12:27:03AM +0300, Dmitry Baryshkov wrote:
> > On Wed, Sep 18, 2024 at 02:08:43AM GMT, Akhil P Oommen wrote:
> > > From: Puranam V G Tejaswi <quic_pvgtejas@xxxxxxxxxxx>
> > >
> > > Add gpu and gmu nodes for sa8775p based platforms.
> >
> > Which platforms? The commit adds nodes to the SoC and the single RIDE
> > platform.
> >
> > >
> > > Signed-off-by: Puranam V G Tejaswi <quic_pvgtejas@xxxxxxxxxxx>
> > > Signed-off-by: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
> > > ---
> > >  arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi |  8 ++++
> > >  arch/arm64/boot/dts/qcom/sa8775p.dtsi      | 75 ++++++++++++++++++++++++++++++
> > >  2 files changed, 83 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> > > index 2a6170623ea9..a01e6675c4bb 100644
> > > --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> > > @@ -407,6 +407,14 @@ queue3 {
> > >     };
> > >  };
> > >
> > > +&gpu {
> > > +   status = "okay";
> > > +
> > > +   zap-shader {
> >
> > It's easier to add gpu_zap_shader_link label in the DTSI file and then
> > reference it instead of using the subnode again.
> >
> > > +           firmware-name = "qcom/sa8775p/a663_zap.mbn";
> > > +   };
> > > +};
> >
> > Separate patch, please.
> >
> > > +
> > >  &i2c11 {
> > >     clock-frequency = <400000>;
> > >     pinctrl-0 = <&qup_i2c11_default>;
> > > diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> > > index 23f1b2e5e624..12c79135a303 100644
> > > --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> > > @@ -2824,6 +2824,81 @@ tcsr_mutex: hwlock@1f40000 {
> > >                     #hwlock-cells = <1>;
> > >             };
> > >
> > > +           gpu: gpu@3d00000 {
> > > +                   compatible = "qcom,adreno-663.0", "qcom,adreno";
> > > +                   reg = <0 0x03d00000 0 0x40000>,
> > > +                         <0 0x03d9e000 0 0x1000>,
> > > +                         <0 0x03d61000 0 0x800>;
> >
> > I think it's suggested to use 0x0 now
> >
> > > +                   reg-names = "kgsl_3d0_reg_memory",
> > > +                               "cx_mem",
> > > +                               "cx_dbgc";
> > > +                   interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
> > > +                   iommus = <&adreno_smmu 0 0xc00>,
> > > +                            <&adreno_smmu 1 0xc00>;
> > > +                   operating-points-v2 = <&gpu_opp_table>;
> > > +                   qcom,gmu = <&gmu>;
> > > +                   interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
> >
> > QCOM_ICC_TAG_ALWAYS instead of 0
> >
> > > +                   interconnect-names = "gfx-mem";
> > > +                   #cooling-cells = <2>;
> >
> > No speed bins?
>
> Thanks for the review. Agree on all comments.
>
> Speedbins were missed because we are sharing these changes early in the
> developement cycle, sort of like what we did for chromeos develeopment.
> Will try to pick it up in the next patchset.

Ack. If you mention this in the commit message, that would be great!

>
> -Akhil
>
> >
> > > +
> > > +                   status = "disabled";
> > > +
> > > +                   zap-shader {
> >
> > gpu_zap_shader: zap-shader
> >
> > > +                           memory-region = <&pil_gpu_mem>;
> > > +                   };
> > > +
> > > +                   gpu_opp_table: opp-table {
> > > +                           compatible = "operating-points-v2";
> > > +
> > > +                           opp-405000000 {
> >
> > Just a single freq?
> >
> > > +                                   opp-hz = /bits/ 64 <405000000>;
> > > +                                   opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> > > +                                   opp-peak-kBps = <8368000>;
> > > +                           };
> > > +
> >
> > Drop the empty line, please.
> >
> > > +                   };
> > > +           };
> > > +
> > > +           gmu: gmu@3d6a000 {
> > > +                   compatible = "qcom,adreno-gmu-663.0", "qcom,adreno-gmu";
> > > +                   reg = <0 0x03d6a000 0 0x34000>,
> > > +                           <0 0x3de0000 0 0x10000>,
> > > +                           <0 0x0b290000 0 0x10000>;
> >
> > Wrong indentation, please align to the angle bracket.
> > Also I think it's suggested to use 0x0 now
> >
> > > +                   reg-names = "gmu", "rscc", "gmu_pdc";
> > > +                   interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
> > > +                                   <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
> >
> > And here
> >
> > > +                   interrupt-names = "hfi", "gmu";
> > > +                   clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
> > > +                            <&gpucc GPU_CC_CXO_CLK>,
> > > +                            <&gcc GCC_DDRSS_GPU_AXI_CLK>,
> > > +                            <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
> > > +                            <&gpucc GPU_CC_AHB_CLK>,
> > > +                            <&gpucc GPU_CC_HUB_CX_INT_CLK>,
> > > +                            <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
> > > +                   clock-names = "gmu",
> > > +                                 "cxo",
> > > +                                 "axi",
> > > +                                 "memnoc",
> > > +                                 "ahb",
> > > +                                 "hub",
> > > +                                 "smmu_vote";
> > > +                   power-domains = <&gpucc GPU_CC_CX_GDSC>,
> > > +                                   <&gpucc GPU_CC_GX_GDSC>;
> > > +                   power-domain-names = "cx",
> > > +                                        "gx";
> > > +                   iommus = <&adreno_smmu 5 0xc00>;
> > > +                   operating-points-v2 = <&gmu_opp_table>;
> > > +
> > > +                   gmu_opp_table: opp-table {
> > > +                           compatible = "operating-points-v2";
> > > +
> > > +                           opp-200000000 {
> > > +                                   opp-hz = /bits/ 64 <200000000>;
> > > +                                   opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> > > +                           };
> > > +                   };
> > > +           };
> > > +
> > >             gpucc: clock-controller@3d90000 {
> > >                     compatible = "qcom,sa8775p-gpucc";
> > >                     reg = <0x0 0x03d90000 0x0 0xa000>;
> > >
> > > --
> > > 2.45.2
> > >
> >
> > --
> > With best wishes
> > Dmitry



-- 
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux