Re: [PATCH v2 2/3] PCI: Allow extending VF BAR within original resource boundary

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 20 Sep 2024, Michał Winiarski wrote:

> VF MMIO resource reservation, either created by system firmware and
> inherited by Linux PCI subsystem or created by the subsystem itself,
> contains enough space to fit the BAR of all SR-IOV Virtual Functions
> that can potentially be created (total VFs supported by the device).
> This can be leveraged when the device is exposing lower than optimal BAR
> size as a default, allowing access to the entire resource when lower
> number of VFs are created.
> It is achieved by dynamically resizing the BAR to largest possible value
> that allows to fit all newly created VFs within the original resource
> boundary.
> 
> Signed-off-by: Michał Winiarski <michal.winiarski@xxxxxxxxx>
> ---
>  drivers/pci/iov.c   | 92 ++++++++++++++++++++++++++++++++++++++++++++-
>  drivers/pci/pci.h   |  1 +
>  include/linux/pci.h |  3 ++
>  3 files changed, 95 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> index e8ccd2ae0f024..d88efbfa70e42 100644
> --- a/drivers/pci/iov.c
> +++ b/drivers/pci/iov.c
> @@ -181,6 +181,86 @@ bool pci_iov_memory_decoding_enabled(struct pci_dev *dev)
>  	return cmd & PCI_SRIOV_CTRL_MSE;
>  }
>  
> +static void pci_iov_resource_do_extend(struct pci_dev *dev, int resno, u16 num_vfs)
> +{
> +	resource_size_t size;
> +	int ret, old, i;
> +	u32 sizes;
> +
> +	pci_config_pm_runtime_get(dev);
> +
> +	if (pci_iov_memory_decoding_enabled(dev)) {
> +		ret = -EBUSY;
> +		goto err;
> +	}
> +
> +	sizes = pci_rebar_get_possible_sizes(dev, resno);
> +	if (!sizes) {
> +		ret = -ENOTSUPP;
> +		goto err;
> +	}
> +
> +	old = pci_rebar_get_current_size(dev, resno);
> +	if (old < 0) {
> +		ret = old;
> +		goto err;
> +	}
> +
> +	while (sizes > 0) {
> +		i = __fls(sizes);
> +		size = pci_rebar_size_to_bytes(i);
> +		if (size * num_vfs <= pci_resource_len(dev, resno)) {
> +			if (i != old) {
> +				ret = pci_rebar_set_size(dev, resno, size);
> +				if (ret)
> +					goto err;
> +
> +				pci_iov_resource_set_size(dev, resno, size);
> +				pci_iov_update_resource(dev, resno);
> +			}
> +			break;
> +		}
> +		sizes &= ~BIT(i);
> +	}
> +
> +	pci_config_pm_runtime_put(dev);
> +
> +	return;
> +
> +err:
> +	dev_WARN(&dev->dev, "Failed to extend %s: %d\n",
> +		 pci_resource_name(dev, resno), ret);

Why do you use dev_WARN()? (analoguous to WARN_ON() / friends).

I suppose you'd want to use pci_warn() instead.

> +	pci_config_pm_runtime_put(dev);
> +}
> +
> +static void pci_iov_resource_do_restore(struct pci_dev *dev, int resno)
> +{
> +	if (dev->sriov->rebar_extend[resno - PCI_IOV_RESOURCES])
> +		pci_iov_resource_do_extend(dev, resno, dev->sriov->total_VFs);
> +}
> +
> +int pci_iov_resource_extend(struct pci_dev *dev, int resno, bool enable)
> +{
> +	if (!pci_resource_is_iov(dev, resno)) {
> +		dev_WARN(&dev->dev, "%s is not an IOV resource\n",
> +			 pci_resource_name(dev, resno));

pci_warn() ?

-- 
 i.

> +
> +		return -ENODEV;
> +	}
> +
> +	if (!pci_rebar_get_possible_sizes(dev, resno))
> +		return -ENOTSUPP;
> +
> +	if (!enable)
> +		pci_iov_resource_do_restore(dev, resno);
> +
> +	dev->sriov->rebar_extend[resno - PCI_IOV_RESOURCES] = enable;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(pci_iov_resource_extend);
> +
>  static void pci_read_vf_config_common(struct pci_dev *virtfn)
>  {
>  	struct pci_dev *physfn = virtfn->physfn;
> @@ -445,7 +525,7 @@ static ssize_t sriov_numvfs_store(struct device *dev,
>  				  const char *buf, size_t count)
>  {
>  	struct pci_dev *pdev = to_pci_dev(dev);
> -	int ret = 0;
> +	int i, ret = 0;
>  	u16 num_vfs;
>  
>  	if (kstrtou16(buf, 0, &num_vfs) < 0)
> @@ -487,6 +567,11 @@ static ssize_t sriov_numvfs_store(struct device *dev,
>  		goto exit;
>  	}
>  
> +	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
> +		if (pdev->sriov->rebar_extend[i])
> +			pci_iov_resource_do_extend(pdev, i + PCI_IOV_RESOURCES, num_vfs);
> +	}
> +
>  	ret = pdev->driver->sriov_configure(pdev, num_vfs);
>  	if (ret < 0)
>  		goto exit;
> @@ -881,8 +966,13 @@ static int sriov_init(struct pci_dev *dev, int pos)
>  
>  static void sriov_release(struct pci_dev *dev)
>  {
> +	int i;
> +
>  	BUG_ON(dev->sriov->num_VFs);
>  
> +	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++)
> +		pci_iov_resource_do_restore(dev, i + PCI_IOV_RESOURCES);
> +
>  	if (dev != dev->sriov->dev)
>  		pci_dev_put(dev->sriov->dev);
>  
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index e763b3fd4c7a2..47ed2633232aa 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -385,6 +385,7 @@ struct pci_sriov {
>  	u16		subsystem_vendor; /* VF subsystem vendor */
>  	u16		subsystem_device; /* VF subsystem device */
>  	resource_size_t	barsz[PCI_SRIOV_NUM_BARS];	/* VF BAR size */
> +	bool		rebar_extend[PCI_SRIOV_NUM_BARS];	/* Resize VF BAR */
>  	bool		drivers_autoprobe; /* Auto probing of VFs by driver */
>  };
>  
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 4cf89a4b4cbcf..c007119da7b3d 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -2364,6 +2364,7 @@ int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs);
>  int pci_sriov_get_totalvfs(struct pci_dev *dev);
>  int pci_sriov_configure_simple(struct pci_dev *dev, int nr_virtfn);
>  resource_size_t pci_iov_resource_size(struct pci_dev *dev, int resno);
> +int pci_iov_resource_extend(struct pci_dev *dev, int resno, bool enable);
>  void pci_vf_drivers_autoprobe(struct pci_dev *dev, bool probe);
>  
>  /* Arch may override these (weak) */
> @@ -2416,6 +2417,8 @@ static inline int pci_sriov_get_totalvfs(struct pci_dev *dev)
>  #define pci_sriov_configure_simple	NULL
>  static inline resource_size_t pci_iov_resource_size(struct pci_dev *dev, int resno)
>  { return 0; }
> +static inline void pci_iov_resource_extend(struct pci_dev *dev, int resno, bool enable)
> +{ return -ENODEV; }
>  static inline void pci_vf_drivers_autoprobe(struct pci_dev *dev, bool probe) { }
>  #endif
>  
> 

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux