This series adds support for fully describing the USB/DP topology on ChromeOS Trogdor devices in DT. Trogdor devices have a single DP phy in the AP that is muxed to one of two usb type-c connectors depending on which port asserts HPD first to the EC. We'd like to know which port is connected to an external monitor to provide a better experience to the user about things like which type-c port is displaying DP or which type-c hub is acting up, etc. Describing the connection all the way from the source to the connector will allow us to do this. DRM core patches: These are used to implement lane assignment for DP altmode configurations through the drm_bridge code. The typec code will use this to tell the DP phy how many lanes of DP to drive and which lanes to drive out to the USB type-c connector. Adding support for lane assignment allows us to implement DP muxing as well, physically splitting the DP lanes on the DP phy so that hardware doesn't have to use an analog mux to steer two DP lanes to one or the other type-c port. Type-c core patches: These add some devm helpers so that the next patches in the series can skip open-coding devres helpers for unregistering typec switches and muxes. DRM aux hpd patches: These implement an auxiliary device for USB type-c DP alternate mode. I took Dmitry's suggestion and moved the code that does the remapping into this driver. The existing hpd bridge is wrapped so as to avoid changing the current users. It also registers a typec mux and switch (if applicable) so that the DP altmode pin assignment and port orientation can be passed to the switch callbacks. We'll still need to implement logic in the phy layer to handle configuration. Cros EC typec patches: This ties together everything that comes before it in this series. The EC typec driver registers the drm_dp_typec_bridge that can signal HPD from the type-c connector through the bridge chain, mux the DP phy in software so that we don't have to use an analog mux, and implement orientation control for boards like Kukui that directly connect the DP phy to the type-c port, necessitating lane assignment to flip the lanes to match the cable orientation. Changes from v2: https://lore.kernel.org/r/20240815003417.1175506-1-swboyd@xxxxxxxxxxxx * Move most of the binding bits to usb-switch.yaml * Move google,cros-ec-typec binding to usb/ * Implement mode-switch and orientation-switch typec controls in drm_dp_typec_bridge driver * Get rid of public APIs that would be used to assign pins or orientation of the port * Add devm helpers for typec mux and switch registration * Add a way to match fwnodes while walking the graph based on the endpoint Changes from v1: https://lore.kernel.org/r/20240210070934.2549994-1-swboyd@xxxxxxxxxxxx * Too many to count! * Split out the DRM bits into this series * Moved the logic into dp-aux-hpd bridge driver * Drive the bridge from cros_ec_typec driver instead of globbing onto the ACPI centric cros-typec-switch driver * During that process drop a lot of patches that aren't needed anymore * Move the DT graph and other properties to the cros-ec-typec binding * Skip mode-switch/orientation-switch properties because we're not registering typec structs anymore Stephen Boyd (17): drm/atomic-helper: Introduce lane remapping support to bridges drm/bridge: Verify lane assignment is going to work during atomic_check usb: typec: Stub out typec_switch APIs when CONFIG_TYPEC=n usb: typec: Add device managed typec_mux_register() usb: typec: Add device managed typec_switch_register() drm/bridge: aux-hpd: Support USB Type-C DP altmodes via DRM lane assignment drm/bridge: dp_typec: Support USB Type-C orientation drm/bridge: dp_typec: Add "no-hpd" support drm/bridge: dp_typec: Allow users to hook hpd notify path device property: Add remote endpoint to devcon matcher dt-bindings: usb-switch: Extract endpoints to defs dt-bindings: usb-switch: Extend for DisplayPort altmode dt-bindings: Move google,cros-ec-typec binding to usb dt-bindings: usb: Add ports to google,cros-ec-typec for DP altmode platform/chrome: cros_ec_typec: Add support for signaling DP HPD via drm_bridge platform/chrome: cros_ec_typec: Support DP muxing platform/chrome: cros_ec_typec: Handle lack of HPD information .../bindings/chrome/google,cros-ec-typec.yaml | 66 -- .../bindings/mfd/google,cros-ec.yaml | 7 +- .../bindings/usb/google,cros-ec-typec.yaml | 295 +++++++++ .../devicetree/bindings/usb/usb-switch.yaml | 164 ++++- drivers/base/property.c | 7 +- drivers/gpu/drm/bridge/aux-hpd-bridge.c | 564 +++++++++++++++++- drivers/gpu/drm/drm_atomic_state_helper.c | 2 + drivers/gpu/drm/drm_bridge.c | 50 ++ drivers/platform/chrome/Kconfig | 1 + drivers/platform/chrome/cros_ec_typec.c | 149 ++++- drivers/platform/chrome/cros_ec_typec.h | 3 + drivers/usb/roles/class.c | 4 +- drivers/usb/typec/mux.c | 72 +++ drivers/usb/typec/retimer.c | 7 +- include/drm/bridge/aux-bridge.h | 26 + include/drm/drm_atomic.h | 31 + include/drm/drm_bridge.h | 4 + include/linux/property.h | 5 +- include/linux/usb/typec_mux.h | 58 +- 19 files changed, 1408 insertions(+), 107 deletions(-) delete mode 100644 Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml create mode 100644 Documentation/devicetree/bindings/usb/google,cros-ec-typec.yaml base-commit: 8400291e289ee6b2bf9779ff1c83a291501f017b -- https://chromeos.dev
