[PATCH 5/6] drm/radeon/dpm/ci: filter clocks based on voltage/clk dep tables

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Filter out mclk and sclk levels higher than listed in the clk
voltage dependency tables.  Supporting these clocks will require
additional driver tweaking that isn't supported yet.

See bug:
https://bugs.freedesktop.org/show_bug.cgi?id=68235

Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
---
 drivers/gpu/drm/radeon/ci_dpm.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/gpu/drm/radeon/ci_dpm.c b/drivers/gpu/drm/radeon/ci_dpm.c
index 8996274..51e947a 100644
--- a/drivers/gpu/drm/radeon/ci_dpm.c
+++ b/drivers/gpu/drm/radeon/ci_dpm.c
@@ -146,6 +146,8 @@ static const struct ci_pt_config_reg didt_config_ci[] =
 };
 
 extern u8 rv770_get_memory_module_index(struct radeon_device *rdev);
+extern void btc_get_max_clock_from_voltage_dependency_table(struct radeon_clock_voltage_dependency_table *table,
+							    u32 *max_clock);
 extern int ni_copy_and_switch_arb_sets(struct radeon_device *rdev,
 				       u32 arb_freq_src, u32 arb_freq_dest);
 extern u8 si_get_ddr3_mclk_frequency_ratio(u32 memory_clock);
@@ -712,6 +714,7 @@ static void ci_apply_state_adjust_rules(struct radeon_device *rdev,
 	struct radeon_clock_and_voltage_limits *max_limits;
 	bool disable_mclk_switching;
 	u32 sclk, mclk;
+	u32 max_sclk_vddc, max_mclk_vddci, max_mclk_vddc;
 	int i;
 
 	if ((rdev->pm.dpm.new_active_crtc_count > 1) ||
@@ -739,6 +742,29 @@ static void ci_apply_state_adjust_rules(struct radeon_device *rdev,
 		}
 	}
 
+	/* limit clocks to max supported clocks based on voltage dependency tables */
+	btc_get_max_clock_from_voltage_dependency_table(&rdev->pm.dpm.dyn_state.vddc_dependency_on_sclk,
+							&max_sclk_vddc);
+	btc_get_max_clock_from_voltage_dependency_table(&rdev->pm.dpm.dyn_state.vddci_dependency_on_mclk,
+							&max_mclk_vddci);
+	btc_get_max_clock_from_voltage_dependency_table(&rdev->pm.dpm.dyn_state.vddc_dependency_on_mclk,
+							&max_mclk_vddc);
+
+	for (i = 0; i < ps->performance_level_count; i++) {
+		if (max_sclk_vddc) {
+			if (ps->performance_levels[i].sclk > max_sclk_vddc)
+				ps->performance_levels[i].sclk = max_sclk_vddc;
+		}
+		if (max_mclk_vddci) {
+			if (ps->performance_levels[i].mclk > max_mclk_vddci)
+				ps->performance_levels[i].mclk = max_mclk_vddci;
+		}
+		if (max_mclk_vddc) {
+			if (ps->performance_levels[i].mclk > max_mclk_vddc)
+				ps->performance_levels[i].mclk = max_mclk_vddc;
+		}
+	}
+
 	/* XXX validate the min clocks required for display */
 
 	if (disable_mclk_switching) {
-- 
1.8.3.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux