Comment # 5
on bug 67982
from Kertesz Laszlo
I did some more poking and i found that setting the cpu governor to "conservative" i get correct voltage handling at bootup after logging into lightdm. But if i restart lightdm and log in, it will get stuck at the 1.34-1.36 levels. With ondemand after boot i always had (maybe 1 or 2 exceptions) the 1.34 and 1.36 voltage levels. Its weird that in that state changing to a vt and back sometimes elevates the voltage to 1.44v and keep it there. I also removed and loaded again the acpi-cpufreq driver - after unloading, the voltage is a fixed (it seems) 1.15v, after loading it again it jumps to 1.34 and stays there (or goes up to 1.36 and back sometimes) until i turn dpms force off and on the monitor, after which it starts to change the voltage levels correctly.
You are receiving this mail because:
- You are the assignee for the bug.
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
