Instead of manually finding the next bridge/panel, and maintaining the
panel-bridge (in-case the next entity is a panel), switch to using the
automatically managing devm_drm_of_get_bridge() API.
Drop the drm_panel support completely from the driver while at it.
Signed-off-by: Aradhya Bhatia <a-bhatia1@xxxxxx>
---
.../gpu/drm/bridge/cadence/cdns-dsi-core.c | 28 ++-----------------
.../gpu/drm/bridge/cadence/cdns-dsi-core.h | 2 --
2 files changed, 3 insertions(+), 27 deletions(-)
diff --git a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c
index b016f2ba06bb..5159c3f0853e 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c
@@ -920,8 +920,6 @@ static int cdns_dsi_attach(struct mipi_dsi_host *host,
struct cdns_dsi_output *output = &dsi->output;
struct cdns_dsi_input *input = &dsi->input;
struct drm_bridge *bridge;
- struct drm_panel *panel;
- struct device_node *np;
int ret;
/*
@@ -939,26 +937,10 @@ static int cdns_dsi_attach(struct mipi_dsi_host *host,
/*
* The host <-> device link might be described using an OF-graph
* representation, in this case we extract the device of_node from
- * this representation, otherwise we use dsidev->dev.of_node which
- * should have been filled by the core.
+ * this representation.
*/
- np = of_graph_get_remote_node(dsi->base.dev->of_node, DSI_OUTPUT_PORT,
- dev->channel);
- if (!np)
- np = of_node_get(dev->dev.of_node);
-
- panel = of_drm_find_panel(np);
- if (!IS_ERR(panel)) {
- bridge = drm_panel_bridge_add_typed(panel,
- DRM_MODE_CONNECTOR_DSI);
- } else {
- bridge = of_drm_find_bridge(np);
- if (!bridge)
- bridge = ERR_PTR(-EINVAL);
- }
-
- of_node_put(np);
-
+ bridge = devm_drm_of_get_bridge(dsi->base.dev, dsi->base.dev->of_node,
+ DSI_OUTPUT_PORT, dev->channel);
if (IS_ERR(bridge)) {
ret = PTR_ERR(bridge);
dev_err(host->dev, "failed to add DSI device %s (err = %d)",
@@ -968,7 +950,6 @@ static int cdns_dsi_attach(struct mipi_dsi_host *host,
output->dev = dev;
output->bridge = bridge;
- output->panel = panel;
/*
* The DSI output has been properly configured, we can now safely
@@ -984,12 +965,9 @@ static int cdns_dsi_detach(struct mipi_dsi_host *host,
struct mipi_dsi_device *dev)
{
struct cdns_dsi *dsi = to_cdns_dsi(host);
- struct cdns_dsi_output *output = &dsi->output;
struct cdns_dsi_input *input = &dsi->input;
drm_bridge_remove(&input->bridge);
- if (output->panel)
- drm_panel_bridge_remove(output->bridge);
return 0;
}
diff --git a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.h b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.h
index ca7ea2da635c..5db5dbbbcaad 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.h
+++ b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.h
@@ -10,7 +10,6 @@
#include <drm/drm_bridge.h>
#include <drm/drm_mipi_dsi.h>
-#include <drm/drm_panel.h>
#include <linux/bits.h>
#include <linux/completion.h>
@@ -21,7 +20,6 @@ struct reset_control;
struct cdns_dsi_output {
struct mipi_dsi_device *dev;
- struct drm_panel *panel;
struct drm_bridge *bridge;
union phy_configure_opts phy_opts;
};
--
2.34.1
