Re: [PATCH v4 2/2] drm/panel: starry-er88577: add new panel driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 21, 2024 at 3:56 AM Dmitry Baryshkov
<dmitry.baryshkov@xxxxxxxxxx> wrote:
>
> On Thu, Jun 20, 2024 at 07:52:45PM GMT, Zhaoxiong Lv wrote:
> > The bias IC of this starry-er88577 panel is placed
> > on the panel side, so when the panel is powered on,
> > there is no need to control AVDD and AVEE in the driver,
> > only 3.3v and reset are needed.
> >
> > Signed-off-by: Zhaoxiong Lv <lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > ---
> > Chage since V3:
> > -  1. Adjust the ".clock" assignment format.
> >
> > v3: https://lore.kernel.org/all/20240614145609.25432-3-lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/
> >
> > Chage since V3:
> > -  Separate Starry-er88577 from the panel-kingdisplay-kd101ne3 driver.
> > -  Use mipi_dsi_dcs_set_display_on_multi().
> > -  Use mipi_dsi_dcs_exit_sleep_mode_multi() and mipi_dsi_msleep().
> >
> > v2: https://lore.kernel.org/all/20240601084528.22502-5-lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/
> >
> > Chage since V2:
> > -  Add compatible for Starry er88577 in panel-kingdisplay-kd101ne3 drivers.
> >
> > ---
> >  drivers/gpu/drm/panel/Kconfig                |   9 +
> >  drivers/gpu/drm/panel/Makefile               |   1 +
> >  drivers/gpu/drm/panel/panel-starry-er88577.c | 343 +++++++++++++++++++
> >  3 files changed, 353 insertions(+)
> >  create mode 100644 drivers/gpu/drm/panel/panel-starry-er88577.c
> >
> > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> > index e54f6f5604ed..a52aa2552ab8 100644
> > --- a/drivers/gpu/drm/panel/Kconfig
> > +++ b/drivers/gpu/drm/panel/Kconfig
> > @@ -781,6 +781,15 @@ config DRM_PANEL_SITRONIX_ST7789V
> >         Say Y here if you want to enable support for the Sitronix
> >         ST7789V controller for 240x320 LCD panels
> >
> > +config DRM_PANEL_STARRY_ER88577
> > +     tristate "Starry er88577 panel"
> > +     depends on OF
> > +     depends on DRM_MIPI_DSI
> > +     depends on BACKLIGHT_CLASS_DEVICE
> > +     help
> > +       Say Y if you want to enable support for panels based on the
> > +       Starry er88577 controller.
> > +
> >  config DRM_PANEL_SONY_ACX565AKM
> >       tristate "Sony ACX565AKM panel"
> >       depends on GPIOLIB && OF && SPI
> > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> > index f0203f6e02f4..ecd843a6dc6e 100644
> > --- a/drivers/gpu/drm/panel/Makefile
> > +++ b/drivers/gpu/drm/panel/Makefile
> > @@ -81,6 +81,7 @@ obj-$(CONFIG_DRM_PANEL_SHARP_LS060T1SX01) += panel-sharp-ls060t1sx01.o
> >  obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
> >  obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
> >  obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
> > +obj-$(CONFIG_DRM_PANEL_STARRY_ER88577) += panel-starry-er88577.o
> >  obj-$(CONFIG_DRM_PANEL_SYNAPTICS_R63353) += panel-synaptics-r63353.o
> >  obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
> >  obj-$(CONFIG_DRM_PANEL_SONY_TD4353_JDI) += panel-sony-td4353-jdi.o
> > diff --git a/drivers/gpu/drm/panel/panel-starry-er88577.c b/drivers/gpu/drm/panel/panel-starry-er88577.c
> > new file mode 100644
> > index 000000000000..e6088262ee69
> > --- /dev/null
> > +++ b/drivers/gpu/drm/panel/panel-starry-er88577.c
> > @@ -0,0 +1,343 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/* Panels based on the ER88577 display controller.
> > + * Author: Zhaoxiong Lv <lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > + */
> > +
> > +#include <linux/delay.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/regulator/consumer.h>
> > +
> > +#include <drm/drm_connector.h>
> > +#include <drm/drm_crtc.h>
> > +#include <drm/drm_mipi_dsi.h>
> > +#include <drm/drm_panel.h>
> > +
> > +#include <video/mipi_display.h>
> > +#include <drm/drm_probe_helper.h>
> > +
> > +struct starry_panel;
> > +
> > +struct panel_desc {
> > +     const struct drm_display_mode *modes;
> > +     unsigned int bpc;
> > +     unsigned long mode_flags;
> > +     enum mipi_dsi_pixel_format format;
> > +     const struct panel_init_cmd *init_cmds;
> > +     int (*init)(struct starry_panel *starry);
> > +     unsigned int lanes;
> > +     bool discharge_on_disable;
> > +     bool lp11_before_reset;
> > +     unsigned int power_off_delay_ms;
> > +};
> > +
> > +struct starry_panel {
> > +     struct drm_panel base;
> > +     struct mipi_dsi_device *dsi;
> > +
> > +     const struct panel_desc *desc;
> > +
> > +     enum drm_panel_orientation orientation;
> > +     struct regulator *vccio;
> > +     struct gpio_desc *reset;
> > +};
> > +
> > +static int starry_er88577_init(struct starry_panel *starry)
> > +{
> > +     struct mipi_dsi_multi_context dsi_ctx = { .dsi = starry->dsi };
> > +
> > +     /* T5:HWreset to init_code >= 120ms */
> > +     mipi_dsi_msleep(dsi_ctx, 120);
> > +
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xe0, 0xab, 0xba);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xe1, 0xba, 0xab);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb1, 0x10, 0x01, 0x47, 0xff);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb2, 0x0c, 0x14, 0x04, 0x50, 0x50, 0x14);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb3, 0x56, 0x53, 0x00);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb4, 0x33, 0x30, 0x04);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb6, 0xb0, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb8, 0x05, 0x12, 0x29, 0x49, 0x40);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb9, 0x7c, 0x61, 0x4f, 0x42, 0x3e, 0x2d, 0x31,
> > +                                  0x1a, 0x33, 0x33, 0x33, 0x52, 0x40, 0x47, 0x38, 0x34, 0x26,
> > +                                  0x0e, 0x06, 0x7c, 0x61, 0x4f, 0x42, 0x3e, 0x2d, 0x31, 0x1a,
> > +                                  0x33, 0x33, 0x33, 0x52, 0x40, 0x47, 0x38, 0x34, 0x26, 0x0e,
> > +                                  0x06);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc0, 0xcc, 0x76, 0x12, 0x34, 0x44, 0x44, 0x44,
> > +                                  0x44, 0x98, 0x04, 0x98, 0x04, 0x0f, 0x00, 0x00, 0xc1);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc1, 0x54, 0x94, 0x02, 0x85, 0x9f, 0x00, 0x6f,
> > +                                  0x00, 0x54, 0x00);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc2, 0x17, 0x09, 0x08, 0x89, 0x08, 0x11, 0x22,
> > +                                  0x20, 0x44, 0xff, 0x18, 0x00);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc3, 0x87, 0x47, 0x05, 0x05, 0x1c, 0x1c, 0x1d,
> > +                                  0x1d, 0x02, 0x1e, 0x1e, 0x1f, 0x1f, 0x0f, 0x0f, 0x0d, 0x0d,
> > +                                  0x13, 0x13, 0x11, 0x11, 0x24);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc4, 0x06, 0x06, 0x04, 0x04, 0x1c, 0x1c, 0x1d,
> > +                                  0x1d, 0x02, 0x1e, 0x1e, 0x1f, 0x1f, 0x0e, 0x0e, 0x0c, 0x0c,
> > +                                  0x12, 0x12, 0x10, 0x10, 0x24);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc8, 0x21, 0x00, 0x31, 0x42, 0x34, 0x16);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xca, 0xcb, 0x43);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xcd, 0x0e, 0x4b, 0x4b, 0x20, 0x19, 0x6b, 0x06,
> > +                                  0xb3);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xd2, 0xe3, 0x2b, 0x38, 0x08);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xd4, 0x00, 0x01, 0x00, 0x0e, 0x04, 0x44, 0x08,
> > +                                  0x10, 0x00, 0x00, 0x00);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xe6, 0x80, 0x09, 0xff, 0xff, 0xff, 0xff, 0xff,
> > +                                  0xff);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0x12, 0x03, 0x20, 0x00, 0xff);
> > +     mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf3, 0x00);
>
> NAK.
>
> This sequence looks _exactly_ like the sequence in
> panel-boe-th101mb31ig002-28a.c.
>
Hi Dmity

We checked the panel-boe-th101mb31ig002-28a.c driver. The init_code is
indeed very similar, but the ICs seem to be different from the names,
and our panels and timings are also different. Do you want us to add
compatibility with Starry in this driver
panel-boe-th101mb31ig002-28a.c?

thanks

> > +
> > +     mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
> > +
> > +     mipi_dsi_msleep(dsi_ctx, 120);
> > +
> > +     mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
> > +     mipi_dsi_msleep(dsi_ctx, 20);
> > +
> > +     return dsi_ctx.accum_err;
>
> --
> With best wishes
> Dmitry




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux