On Wed, 12 Jun 2024, Maxime Ripard <mripard@xxxxxxxxxx> wrote: > We recently added some infrastructure to deal with HDMI but we're still > lacking a couple of things. Add a TODO entry with the remaining items. > > Cc: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> > Signed-off-by: Maxime Ripard <mripard@xxxxxxxxxx> > --- > Documentation/gpu/todo.rst | 29 +++++++++++++++++++++++++++++ > 1 file changed, 29 insertions(+) > > diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst > index 2ea6ffc9b22b..52fd8672fb6d 100644 > --- a/Documentation/gpu/todo.rst > +++ b/Documentation/gpu/todo.rst > @@ -633,10 +633,39 @@ long as that supports DMA. Otherwise importing can still needlessly fail. > > Contact: Thomas Zimmermann <tzimmermann@xxxxxxx>, Daniel Vetter > > Level: Advanced > > +Improve HDMI Infrastructure > +--------------------------- > + > +We have a bunch of helpers to handle HDMI and reduce the boilerplate in > +drivers. Support so far includes HDMI 1.4 support, but we need to extend > +it with: > + > + - CEC handling support. CEC requires a bit of integration into every > + HDMI driver to set the device physical address according to the EDID > + in `.get_modes`, and to clear/reset it in the hotplug detection > + path. We should create the ``drm_atomic_helper_connector_hdmi_get_modes()`` > + and ``drm_atomic_helper_connector_hdmi_handle_hotplug()`` helpers to handle > + this properly, and convert drivers to use them. Furthermore, we should stop passing EDID to the CEC functions, and instead use the source physical address we've parsed ourselves and stored to connector->display_info.source_physical_address. I.e. stop using - drm_dp_cec_set_edid() - cec_s_phys_addr_from_edid() - cec_get_edid_phys_addr() And instead use .source_physical_address and - drm_dp_cec_attach() - cec_s_phys_addr() The main rationale is to avoid using a separate EDID parser that's outside of the drm subsystem and unaware of struct drm_edid and frankly cdoes not look very robust. BR, Jani. > + > + - In order to support HDMI 2.0 properly, the scrambler parameters need > + to be moved into the state. This includes figuring out in > + drm_atomic_helper_connector_hdmi_check() if the scrambler and TMDS ratio > + need to be changed, and make the > + ``drm_atomic_helper_connector_hdmi_handle_hotplug()`` helper reset the > + scrambler status when the device is plugged and unplugged. > + > + - We need to support YUV420 too. > + > +The `vc4` driver is a good example for all this. > + > +Contact: Maxime Ripard <mripard@xxxxxxxxxx> > + > +Level: Intermediate > + > > Better Testing > ============== > > Add unit tests using the Kernel Unit Testing (KUnit) framework -- Jani Nikula, Intel
