[PATCH V2] drm/bridge: adv7511: Fix Intermittent EDID failures

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In the process of adding support for shared IRQ pins, a scenario
was accidentally created where adv7511_irq_process returned
prematurely causing the EDID to fail randomly.

Since the interrupt handler is broken up into two main helper functions,
update both of them to treat the helper functions as IRQ handlers. These
IRQ routines process their respective tasks as before, but if they
determine that actual work was done, mark the respective IRQ status
accordingly, and delay the check until everything has been processed.

This should guarantee the helper functions don't return prematurely
while still returning proper values of either IRQ_HANDLED or IRQ_NONE.

Reported-by: Liu Ying <victor.liu@xxxxxxx>
Fixes: f3d9683346d6 ("drm/bridge: adv7511: Allow IRQ to share GPIO pins")
Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
Tested-by: Liu Ying <victor.liu@xxxxxxx> # i.MX8MP EVK ADV7535 EDID retrieval w/o IRQ
---
V2:  Fix uninitialized cec_status
     Cut back a little on error handling to return either IRQ_NONE or
     IRQ_HANDLED.

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
index ea271f62b214..ec0b7f3d889c 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
@@ -401,7 +401,7 @@ struct adv7511 {
 
 #ifdef CONFIG_DRM_I2C_ADV7511_CEC
 int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511);
-void adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1);
+int adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1);
 #else
 static inline int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
 {
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c b/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
index 44451a9658a3..651fb1dde780 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
@@ -119,7 +119,7 @@ static void adv7511_cec_rx(struct adv7511 *adv7511, int rx_buf)
 	cec_received_msg(adv7511->cec_adap, &msg);
 }
 
-void adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1)
+int adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1)
 {
 	unsigned int offset = adv7511->info->reg_cec_offset;
 	const u32 irq_tx_mask = ADV7511_INT1_CEC_TX_READY |
@@ -130,17 +130,21 @@ void adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1)
 				ADV7511_INT1_CEC_RX_READY3;
 	unsigned int rx_status;
 	int rx_order[3] = { -1, -1, -1 };
-	int i;
+	int i, ret = 0;
+	int irq_status = IRQ_NONE;
 
-	if (irq1 & irq_tx_mask)
+	if (irq1 & irq_tx_mask) {
 		adv_cec_tx_raw_status(adv7511, irq1);
+		irq_status = IRQ_HANDLED;
+	}
 
 	if (!(irq1 & irq_rx_mask))
-		return;
+		return irq_status;
 
-	if (regmap_read(adv7511->regmap_cec,
-			ADV7511_REG_CEC_RX_STATUS + offset, &rx_status))
-		return;
+	ret = regmap_read(adv7511->regmap_cec,
+			ADV7511_REG_CEC_RX_STATUS + offset, &rx_status);
+	if (ret < 0)
+		return irq_status;
 
 	/*
 	 * ADV7511_REG_CEC_RX_STATUS[5:0] contains the reception order of RX
@@ -172,6 +176,8 @@ void adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1)
 
 		adv7511_cec_rx(adv7511, rx_buf);
 	}
+
+	return IRQ_HANDLED;
 }
 
 static int adv7511_cec_adap_enable(struct cec_adapter *adap, bool enable)
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 66ccb61e2a66..c8d2c4a157b2 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -469,6 +469,8 @@ static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd)
 {
 	unsigned int irq0, irq1;
 	int ret;
+	int cec_status = IRQ_NONE;
+	int irq_status = IRQ_NONE;
 
 	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
 	if (ret < 0)
@@ -478,29 +480,31 @@ static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd)
 	if (ret < 0)
 		return ret;
 
-	/* If there is no IRQ to handle, exit indicating no IRQ data */
-	if (!(irq0 & (ADV7511_INT0_HPD | ADV7511_INT0_EDID_READY)) &&
-	    !(irq1 & ADV7511_INT1_DDC_ERROR))
-		return -ENODATA;
-
 	regmap_write(adv7511->regmap, ADV7511_REG_INT(0), irq0);
 	regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1);
 
-	if (process_hpd && irq0 & ADV7511_INT0_HPD && adv7511->bridge.encoder)
+	if (process_hpd && irq0 & ADV7511_INT0_HPD && adv7511->bridge.encoder) {
 		schedule_work(&adv7511->hpd_work);
+		irq_status = IRQ_HANDLED;
+	}
 
 	if (irq0 & ADV7511_INT0_EDID_READY || irq1 & ADV7511_INT1_DDC_ERROR) {
 		adv7511->edid_read = true;
 
 		if (adv7511->i2c_main->irq)
 			wake_up_all(&adv7511->wq);
+		irq_status = IRQ_HANDLED;
 	}
 
 #ifdef CONFIG_DRM_I2C_ADV7511_CEC
-	adv7511_cec_irq_process(adv7511, irq1);
+	cec_status = adv7511_cec_irq_process(adv7511, irq1);
 #endif
 
-	return 0;
+	/* If there is no IRQ to handle, exit indicating no IRQ data */
+	if (irq_status == IRQ_HANDLED || cec_status == IRQ_HANDLED)
+		return IRQ_HANDLED;
+
+	return IRQ_NONE;
 }
 
 static irqreturn_t adv7511_irq_handler(int irq, void *devid)
@@ -509,7 +513,7 @@ static irqreturn_t adv7511_irq_handler(int irq, void *devid)
 	int ret;
 
 	ret = adv7511_irq_process(adv7511, true);
-	return ret < 0 ? IRQ_NONE : IRQ_HANDLED;
+	return ret < 0 ? IRQ_NONE : ret;
 }
 
 /* -----------------------------------------------------------------------------
-- 
2.43.0




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux