This patchset sits on top Maxime's HDMI connector patchset ([1]). Currently this is an RFC exploring the interface between HDMI bridges and HDMI connector code. This has been lightly verified on the Qualcomm DB820c, which has native HDMI output. If this approach is considered to be acceptable, I'll finish MSM HDMI bridge conversion (reworking the Audio Infoframe code). Other bridges can follow the same approach (we have lt9611 / lt9611uxc / adv7511 on Qualcomm hardware). [1] https://patchwork.freedesktop.org/series/122421/ Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- Changes in v4: - Reworked drm_bridge_connector functions to remove ternary operators and to reduce indentation level (Maxime) - Added hdmi_ prefix to all HDMI-related drm_bridge_funcs calls (Maxime) - Made vendor and product mandatory to the HDMI bridges (Maxime) - Documented that max_bpc can be 8, 10 or 12 (Maxime) - Changed hdmi->pixclock to be set using tmds_char_rate instead of calculating that manually (Maxime) - Changed mode_valid to use helper function instead of manually doing mode->clock * 1000 - Removed hdmi_mode in favour of connector->display_info.is_hdmi - Link to v3: https://lore.kernel.org/r/20240530-bridge-hdmi-connector-v3-0-a1d184d68fe3@xxxxxxxxxx Changes in v3: - Rebased on top of the merged HDMI connector patchset. - Changed drm_bridge_connector to use drmm_connector_init() (Maxime) - Added a check that write_infoframe callback is present if BRIDGE_OP_HDMI is set. - Moved drm_atomic_helper_connector_hdmi_check() call from drm_bridge_connector to the HDMI bridge driver to remove dependency from drm_kms_helpers on the optional HDMI state helpers. - Converted Audio InfoFrame handling code. - Added support for HDMI Vendor Specific and SPD InfoFrames. - Link to v2: https://lore.kernel.org/r/20240309-bridge-hdmi-connector-v2-0-1380bea3ee70@xxxxxxxxxx Changes in v2: - Dropped drm_connector_hdmi_setup(). Instead added drm_connector_hdmi_init() to be used by drm_bridge_connector. - Changed the drm_bridge_connector to act as a proxy for the HDMI connector infrastructure. This removes most of the logic from the bridge drivers. - Link to v1: https://lore.kernel.org/r/20240308-bridge-hdmi-connector-v1-0-90b693550260@xxxxxxxxxx --- Dmitry Baryshkov (9): drm/connector: hdmi: accept NULL for Audio Infoframe drm/bridge-connector: switch to using drmm allocations drm/bridge-connector: implement glue code for HDMI connector drm/msm/hdmi: switch to atomic bridge callbacks drm/msm/hdmi: turn mode_set into atomic_enable drm/msm/hdmi: make use of the drm_connector_hdmi framework drm/msm/hdmi: get rid of hdmi_mode drm/msm/hdmi: update HDMI_GEN_PKT_CTRL_GENERIC0_UPDATE definition drm/msm/hdmi: also send the SPD and HDMI Vendor Specific InfoFrames drivers/gpu/drm/display/drm_hdmi_state_helper.c | 14 +- drivers/gpu/drm/drm_bridge_connector.c | 109 +++++++-- drivers/gpu/drm/drm_debugfs.c | 2 + drivers/gpu/drm/msm/Kconfig | 2 + drivers/gpu/drm/msm/hdmi/hdmi.c | 46 +--- drivers/gpu/drm/msm/hdmi/hdmi.h | 18 +- drivers/gpu/drm/msm/hdmi/hdmi_audio.c | 74 ++---- drivers/gpu/drm/msm/hdmi/hdmi_bridge.c | 310 +++++++++++++++++++----- drivers/gpu/drm/msm/registers/display/hdmi.xml | 2 +- include/drm/drm_bridge.h | 83 +++++++ 10 files changed, 472 insertions(+), 188 deletions(-) --- base-commit: 80100af925a09ff99fcd6604a5fd8101dd0d17fd change-id: 20240307-bridge-hdmi-connector-7e3754e661d0 Best regards, -- Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
