The WL-355608-A8 is a 3.5" 640x480@60Hz RGB LCD display used in a number of handheld gaming devices made by Anbernic. By consensus a vendor prefix is not provided as the panel OEM is unknown. Add a device tree binding for the panel. Signed-off-by: Ryan Walklin <ryan@xxxxxxxxxxxxx> Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> --- Changelog v1..v2: - Correct compatible string and filename - Note #dri-devel discussion regarding vendor prefix - Remove unnecessary node names, spi-gpio compatible string and GPIOs from example Changelog v2..v3: - Remove errant tab and un-needed spi node label from example - Add Reviewed-by tag --- .../bindings/display/panel/wl-355608-a8.yaml | 60 +++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/wl-355608-a8.yaml diff --git a/Documentation/devicetree/bindings/display/panel/wl-355608-a8.yaml b/Documentation/devicetree/bindings/display/panel/wl-355608-a8.yaml new file mode 100644 index 0000000000..e552d01b52 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/wl-355608-a8.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/wl-355608-a8.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: WL-355608-A8 3.5" (640x480 pixels) 24-bit IPS LCD panel + +maintainers: + - Ryan Walklin <ryan@xxxxxxxxxxxxx> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: wl-355608-a8 + + reg: + maxItems: 1 + + spi-3wire: true + +required: + - compatible + - reg + - port + - power-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "wl-355608-a8"; + reg = <0>; + + spi-3wire; + spi-max-frequency = <3125000>; + + reset-gpios = <&pio 8 14 GPIO_ACTIVE_LOW>; // PI14 + + backlight = <&backlight>; + power-supply = <®_lcd>; + + port { + endpoint { + remote-endpoint = <&tcon_lcd0_out_lcd>; + }; + }; + }; + }; -- 2.45.1