From: Jason-jh Lin <jason-jh.lin@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> For the Secure Video Path (SVP) feature, inculding the memory stored secure video content, the registers of display HW pipeline and the HW configure operations are required to execute in the secure world. So using a CMDQ secure driver to make all display HW registers configuration secure DRAM access permision settings execute by GCE secure thread in the secure world. We are landing this feature on mt8188 and mt8195 currently. --- TODO: 1) Squash cmdq_sec_task_exec_work() into cmdq_sec_mbox_send_data() 2) Call into TEE to query cookie instead of using shared memory in cmdq_sec_get_cookie() 3) Register shared memory as command buffer instead of copying normal command buffer to IWC shared memory 4) Use SOFTDEP to make cmdq_sec_probe later than OPTEE loaded and then move cmdq_sec_session_init into cmdq_sec_probe() 5) Remove timeout detection in cmdq_sec_session_send() --- Resend v6: 1. Rebase on [1] Add mediatek,gce-props.yaml for other bindings reference to fix yaml check error - [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=819298 2. Fix unused varibale build error Changes in v6: 1. Rebase to linux-next 2. Change the way to add gce-events prop into dt-binding and add more commit message 3. Remove unused parameters in secure mailbox driver 4. Move cmdq_sec_XXX APIs from secure mailbox driver to helper to fix the build cycle dependency error 5. Remove finalize loop API and write_s_reg API patch 6. Add cmdq secure helper API patch Changes in v5: 1. Sync the local changes Changes in v4: 1. Rebase on mediatek-drm-next(278640d4d74cd) and fix the conflicts 2. This series is based on 20240307013458.23550-1-jason-jh.lin@xxxxxxxxxxxx Changes in v3: 1. separate mt8188 driver porting patches to another series 2. separate adding 'mediatek,gce-events' event prop to another series 3. sepatate mailbox helper and controller driver modification to a single patch for adding looping thread 4. add kerneldoc for secure mailbox related definition 5. add moving reuseable definition patch before adding secure mailbox driver patch 6. adjust redundant logic in mtk-cmdq-sec-mailbox Changes in v2: 1. adjust dt-binding SW event define patch before the dt-binding patch using it 2. adjust dt-binding patch for secure cmdq driver 3. remove the redundant patches or merge the patches of modification for the same API --- Jason-JH.Lin (8): dt-bindings: gce: mt8195: Add CMDQ_SYNC_TOKEN_SECURE_THR_EOF event id dt-bindings: mailbox: Add property for CMDQ secure driver soc: mediatek: cmdq: Add cmdq_pkt_logic_command to support math operation mailbox: mtk-cmdq: Support GCE loop packets in interrupt handler mailbox: mediatek: Move reuseable definition to header for secure driver mailbox: mediatek: Add CMDQ secure mailbox driver mailbox: mediatek: Add secure CMDQ driver support for CMDQ driver soc: mediatek: mtk-cmdq: Add secure cmdq_pkt APIs .../mailbox/mediatek,gce-mailbox.yaml | 8 +- drivers/mailbox/Makefile | 2 +- drivers/mailbox/mtk-cmdq-mailbox.c | 113 ++- drivers/mailbox/mtk-cmdq-sec-mailbox.c | 931 ++++++++++++++++++ drivers/mailbox/mtk-cmdq-sec-tee.c | 195 ++++ drivers/soc/mediatek/mtk-cmdq-helper.c | 191 ++++ include/dt-bindings/gce/mt8195-gce.h | 6 + include/linux/mailbox/mtk-cmdq-mailbox.h | 35 + .../linux/mailbox/mtk-cmdq-sec-iwc-common.h | 342 +++++++ include/linux/mailbox/mtk-cmdq-sec-mailbox.h | 106 ++ include/linux/mailbox/mtk-cmdq-sec-tee.h | 105 ++ include/linux/soc/mediatek/mtk-cmdq.h | 113 +++ 12 files changed, 2117 insertions(+), 30 deletions(-) create mode 100644 drivers/mailbox/mtk-cmdq-sec-mailbox.c create mode 100644 drivers/mailbox/mtk-cmdq-sec-tee.c create mode 100644 include/linux/mailbox/mtk-cmdq-sec-iwc-common.h create mode 100644 include/linux/mailbox/mtk-cmdq-sec-mailbox.h create mode 100644 include/linux/mailbox/mtk-cmdq-sec-tee.h -- 2.18.0
