Unconditionally enable the DPSUB layer in the corresponding atomic plane update callback. Setting the new display mode may require disabling and re-enabling the CRTC. This effectively resets DPSUB to the default state with all layers disabled. The original implementation of the plane atomic update enables the corresponding DPSUB layer only if the framebuffer format has changed. This would leave the layer disabled after switching to a different display mode with the same framebuffer format. Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@xxxxxxx> --- Changes in v2: - Added comment around DPSUB layer enablement explaining why it should be done unconditionally. - Link to v1: https://lore.kernel.org/r/20240520-dp-layer-enable-v1-1-c9b481209115@xxxxxxx --- drivers/gpu/drm/xlnx/zynqmp_kms.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/xlnx/zynqmp_kms.c b/drivers/gpu/drm/xlnx/zynqmp_kms.c index 43bf416b33d5..0b57ab5451a9 100644 --- a/drivers/gpu/drm/xlnx/zynqmp_kms.c +++ b/drivers/gpu/drm/xlnx/zynqmp_kms.c @@ -120,9 +120,13 @@ static void zynqmp_dpsub_plane_atomic_update(struct drm_plane *plane, zynqmp_disp_blend_set_global_alpha(dpsub->disp, true, plane->state->alpha >> 8); - /* Enable or re-enable the plane if the format has changed. */ - if (format_changed) - zynqmp_disp_layer_enable(layer); + /* + * Unconditionally enable the layer, as it may have been disabled + * previously either explicitly to reconfigure layer format, or + * implicitly after DPSUB reset during display mode change. DRM + * framework calls this callback for enabled planes only. + */ + zynqmp_disp_layer_enable(layer); } static const struct drm_plane_helper_funcs zynqmp_dpsub_plane_helper_funcs = { --- base-commit: 673087d8b023faf34b84e8faf63bbeea3da87bab change-id: 20240520-dp-layer-enable-7b561af29ca8 Best regards, -- Anatoliy Klymenko <anatoliy.klymenko@xxxxxxx>
