This series aims to add support for the DesignWare MIPI DSI controller and the Innoslicon D-PHY found in RK3128 SoCs. The code additions are rather tiny: It only need some code in the Rockchip dw-mipi-dsi glue layer for this SoC and do some changes in the SoC's clock driver. Support for the phy was already added when the Innosilicon D-PHY driver was initially submitted. I tested it with a 800x1280 DSI panel where all 4 lanes that are supported are used. changes in v2: To improve power-efficiency when the DSI controller is not in use, I dropped the patch which made hclk_vio_h2p a critical clock and instead added support for an AHB clock to the DSI controller driver and updated the bindings and the addition to the SoC DT accordingly. Link to v1: https://lore.kernel.org/linux-kernel/20240506194343.282119-1-knaerzche@xxxxxxxxx/ changes in v3: Dropped the changes for the additional AHB clock for the DSI controller, as it's not part of the IP block. (Heiko) Link to v2: https://lore.kernel.org/linux-kernel/20240509120715.86694-1-knaerzche@xxxxxxxxx/ Please see individual patches for details about the changes. Alex Bee (7): dt-bindings: display: rockchip,dw-mipi-dsi: Document RK3128 DSI dt-bindings: clock: rk3128: Add PCLK_MIPIPHY clk: rockchip: rk3128: Export PCLK_MIPIPHY clk: rockchip: rk3128: Add hclk_vio_h2p to critical clocks drm/rockchip: dsi: Add support for RK3128 ARM: dts: rockchip: Add D-PHY for RK3128 ARM: dts: rockchip: Add DSI for RK3128 .../rockchip/rockchip,dw-mipi-dsi.yaml | 2 + arch/arm/boot/dts/rockchip/rk3128.dtsi | 50 +++++++++++++++++++ drivers/clk/rockchip/clk-rk3128.c | 3 +- .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 20 ++++++++ include/dt-bindings/clock/rk3128-cru.h | 1 + 5 files changed, 75 insertions(+), 1 deletion(-) -- 2.43.2