Implement live video input format setting for ZynqMP DPSUB. ZynqMP DPSUB can operate in 2 modes: DMA-based and live. In the live mode, DPSUB receives a live video signal from FPGA-based CRTC. DPSUB acts as a DRM encoder bridge in such a scenario. To properly tune into the incoming video signal, DPSUB should be programmed with the proper media bus format. This patch series addresses this task. Patch 1/7: Set the DPSUB layer mode of operation prior to enabling the layer. Allows to use layer operational mode before its enablement. Patch 2/7: Update some IP register defines. Patch 3/7: Factor out some code into a helper function. Patch 4/7: Announce supported input media bus formats via drm_bridge_funcs.atomic_get_input_bus_fmts callback. Patch 5/7: Minimize usage of a global flag. Minor improvement. Patch 6/7: Program DPSUB live video input format based on selected bus config in the new atomic bridge state. Patch 7/7: New optional CRTC atomic helper proposal that will allow to negotiate video signal format between CRTC and connected encoder. Incorporate this callback into the DRM bridge format negotiation process. Save negotiated output format in drm_crtc_state. Reference usage of this API is available here: https://github.com/onotole/linux/tree/dpsub-live-in To: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> To: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx> To: Maxime Ripard <mripard@xxxxxxxxxx> To: Thomas Zimmermann <tzimmermann@xxxxxxx> To: David Airlie <airlied@xxxxxxxxx> To: Daniel Vetter <daniel@xxxxxxxx> To: Michal Simek <michal.simek@xxxxxxx> To: Andrzej Hajda <andrzej.hajda@xxxxxxxxx> To: Neil Armstrong <neil.armstrong@xxxxxxxxxx> To: Robert Foss <rfoss@xxxxxxxxxx> To: Jonas Karlman <jonas@xxxxxxxxx> To: Jernej Skrabec <jernej.skrabec@xxxxxxxxx> To: Rob Herring <robh+dt@xxxxxxxxxx> To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx> To: Conor Dooley <conor+dt@xxxxxxxxxx> To: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> Cc: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx Cc: devicetree@xxxxxxxxxxxxxxx Cc: linux-media@xxxxxxxxxxxxxxx Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@xxxxxxx> Changes in v4: - Replace controversial reference driver patches with the private repository link. - Split display layer format manipulation functions into 2 separate cases for diferet layer modes. - Address misc review comments (typos, comments, etc.) Link to v3: https://lore.kernel.org/r/20240321-dp-live-fmt-v3-0-d5090d796b7e@xxxxxxx Changes in v3: - Add connected live layer helper - Include reference DRM format in zynqmp_disp_format for live layerss. - Add default bus format list for non-live case. - Explain removal of redundant checks in the commit message. - Minor fixes and improvements from review comments. Link to v2: https://lore.kernel.org/r/20240312-dp-live-fmt-v2-0-a9c35dc5c50d@xxxxxxx Changes in v2: - Factor out register defines update into separate patch. - Add some improvements minimizing ithe usage of a global flag. - Reuse existing format setting API instead of introducing new versions. - Add warning around NULL check on new bridge state within atomic enable callback. - Add drm_helper_crtc_select_output_bus_format() that wraps drm_crtc_helper_funcs.select_output_bus_format(). - Update API comments per review recommendations. - Address some minor review comments. - Add reference CRTC driver that demonstrates the usage of the proposed drm_crtc_helper_funcs.select_output_bus_format() API. - Link to v1: https://lore.kernel.org/r/20240226-dp-live-fmt-v1-0-b78c3f69c9d8@xxxxxxx --- Anatoliy Klymenko (7): drm: xlnx: zynqmp_dpsub: Set layer mode during creation drm: xlnx: zynqmp_dpsub: Update live format defines drm: xlnx: zynqmp_dpsub: Add connected live layer helper drm: xlnx: zynqmp_dpsub: Anounce supported input formats drm: xlnx: zynqmp_dpsub: Minimize usage of global flag drm: xlnx: zynqmp_dpsub: Set input live format drm/atomic-helper: Add select_output_bus_format callback drivers/gpu/drm/drm_bridge.c | 14 +- drivers/gpu/drm/drm_crtc_helper.c | 38 +++++ drivers/gpu/drm/xlnx/zynqmp_disp.c | 231 +++++++++++++++++++++++++++---- drivers/gpu/drm/xlnx/zynqmp_disp.h | 17 +-- drivers/gpu/drm/xlnx/zynqmp_disp_regs.h | 8 +- drivers/gpu/drm/xlnx/zynqmp_dp.c | 81 ++++++++--- drivers/gpu/drm/xlnx/zynqmp_kms.c | 2 +- include/drm/drm_crtc.h | 11 ++ include/drm/drm_crtc_helper.h | 5 + include/drm/drm_modeset_helper_vtables.h | 30 ++++ 10 files changed, 372 insertions(+), 65 deletions(-) --- base-commit: bfa4437fd3938ae2e186e7664b2db65bb8775670 change-id: 20240226-dp-live-fmt-6415773b5a68 Best regards, -- Anatoliy Klymenko <anatoliy.klymenko@xxxxxxx>
