[RESEND v7 24/37] mfd: sm501: Convert platform_data to OF property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Various parameters of SM501 can be set using platform_data,
so parameters cannot be passed in the DeviceTree target.
Expands the parameters set in platform_data so that they can be
specified using DeviceTree properties.

Signed-off-by: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/mfd/sm501.c           | 315 ++++++++++++++++++++++++++++++++++
 drivers/video/fbdev/sm501fb.c | 106 ++++++++++++
 2 files changed, 421 insertions(+)

diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index b3592982a83b..98a69e254f5f 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -82,6 +82,16 @@ struct sm501_devdata {
 	unsigned int			 rev;
 };
 
+struct sm501_config_props_uint {
+	char *name;
+	u32 shift;
+};
+
+struct sm501_config_props_flag {
+	char *clr_name;
+	char *set_name;
+	u32 bit;
+};
 
 #define MHZ (1000 * 1000)
 
@@ -1370,6 +1380,305 @@ static int sm501_init_dev(struct sm501_devdata *sm)
 	return 0;
 }
 
+static const struct sm501_config_props_uint misc_timing[] = {
+	{"delay",    0},
+	{"-",        3},
+	{"divider",  4},
+	{"-",        6},
+	{"sm0",      8},
+	{"-",       12},
+	{"sm1",     16},
+	{"-",       20},
+	{"xc",      24},
+	{"-",       26},
+	{"ex",      28},
+	{NULL,      32},
+};
+
+static const struct sm501_config_props_flag misc_timing_flag[] = {
+	{"usb-host-normal",          "usb-host-simulation",    3},
+	{"no-acpi-control",          "acpi-control",           6},
+	{"pll-debug-input",          "pll-debug-output",       7},
+	{"sdram-clock-mode0-288mhz", "sdram-clock-mode0-div", 12},
+	{"sdram-clock-mode1-288mhz", "sdram-clock-mode1-div", 20},
+	{"usb-over-current-detect-disable",
+	 "usb-over-current-detect-enable",  23},
+	{},
+};
+
+static const struct sm501_config_props_uint misc_control[] = {
+	{"hold",     18},
+	{"refresh",  21},
+	{"-",        23},
+	{"usbclk",   28},
+	{"pad",      30},
+	{NULL,       32},
+};
+
+static const struct sm501_config_props_flag misc_control_flag[] = {
+	{"vr-mmio-30mb",            "vr-mmio-62mb",             4},
+	{"usb-port-master",         "usb-port-slave",           9},
+	{"burst-length-8",          "burst-length-1",          10},
+	{"usb-slave-cpu",           "usb-slave-8051",          11},
+	{"dac-power-enable",        "dac-power-disable",       12},
+	{"pll-clock-count-disable", "pll-clock-count-enable",  15},
+	{"interrupt-normal",        "interrupt-invarted",      16},
+	{"sh-ready-low",            "sh-ready-high",           17},
+	{"xtal-freq-24mhz",         "xtal-freq-12mhz",         24},
+	{"panel-data-18bit",        "panel-dtat-24bit",        25},
+	{"latch-address-disable",   "latch-address-enable",    26},
+	{"uart1",                   "ssp1",                    27},
+	{},
+};
+
+/* Read configuration values */
+static void sm501_of_read_config(struct device *dev, struct device_node *np,
+				 const char *prefix,
+				 const struct sm501_config_props_uint *props,
+				 const struct sm501_config_props_flag *props_flag,
+				 struct sm501_reg_init *ret)
+{
+	struct device_node *child;
+	char *name;
+	u32 shift;
+	u32 width;
+	u32 mask;
+	u32 val;
+
+	ret->mask = ~0;
+	ret->set = 0;
+
+	child = of_get_child_by_name(np, prefix);
+	if (!child)
+		return;
+
+	while (props->name) {
+		name = props->name;
+		shift = props->shift;
+		props++;
+
+		if (name[0] == '-' ||
+		    of_property_read_u32(child, name, &val))
+			continue;
+
+		width = props->shift - shift;
+		mask = (1 << width) - 1;
+		if (mask < val) {
+			dev_warn(dev, "%s invalid value %d", name, val);
+			continue;
+		}
+		mask = ~(mask << shift);
+		ret->mask &= mask;
+		ret->set |= val << shift;
+	}
+	while (props_flag->clr_name) {
+		val = ~0;
+		if (of_property_read_bool(child, props_flag->clr_name))
+			val = 0;
+		else if (of_property_read_bool(child, props_flag->set_name))
+			val = 1;
+		if (val != ~0) {
+			val <<= (props_flag->bit & 31);
+			mask = 1 << (props_flag->bit & 31);
+			ret->mask &= ~mask;
+			ret->set |= val;
+		}
+		props_flag++;
+	}
+}
+
+/* Read GPIO control */
+/*
+ * DT example.
+ * gpio-pin-control {
+ *   pin@0 {
+ *	 gpio-port;
+ *   };
+ *   pin@1 {
+ *	 function;
+ *   };
+ * };
+ */
+static void sm501_of_read_gpio(struct device *dev, struct device_node *np,
+			       struct sm501_reg_init *hi, struct sm501_reg_init *low)
+{
+	struct device_node *gpio_group, *pin;
+	const char *prop_mode;
+	unsigned int pin_no;
+	int mode;
+	u64 mask;
+	u64 set;
+
+	mask = ~0;
+	set = 0;
+	gpio_group = of_get_child_by_name(np, "gpio-pin-control");
+	if (gpio_group) {
+		for_each_child_of_node(gpio_group, pin) {
+			mode = -1;
+			if (sscanf(pin->full_name, "pin@%u", &pin_no) == 1) {
+				if (of_property_read_bool(pin, "gpio-port"))
+					mode = 0;
+				else if (of_property_read_bool(pin, "function"))
+					mode = 1;
+			}
+			/* GPIO0 - 47 and 55 -63 */
+			if (mode < 0 ||
+			    (pin_no >= 64 || (pin_no >= 48 && pin_no <= 54))) {
+				dev_warn(dev,
+					 "%s mode %s is invalid.", pin->name, prop_mode);
+			} else {
+				mask &= ~(1 << pin_no);
+				set |= mode << pin_no;
+			}
+		}
+	}
+	hi->set = set >> 32;
+	low->set = set & 0xffffffff;
+	hi->mask = mask >> 32;
+	low->mask = mask & 0xffffffff;
+}
+
+static inline int read_i2c_prop(struct device *dev, struct device_node *child,
+				const char *name, u32 *val)
+{
+	if (of_property_read_u32(child, name, val)) {
+		dev_warn(dev, "%s/%s not found. skip it.", of_node_full_name(child), name);
+		return -ENOENT;
+	}
+	return 0;
+}
+
+/* Read GPIO I2C configuration */
+/*
+ * DT example.
+ * gpio-i2c {
+ *    i2c@0 {
+ *	sda = <gpio-pin>;
+ *	scl = <gpio-pin>;
+ *	delay = <delay>;
+ *	timeout = <timeout>;
+ *    };
+ *    i2c@1 {
+ *      :
+ *    };
+ *    :
+ * };
+ */
+static int sm501_parse_dt_gpio_i2c(struct device *dev, struct sm501_platdata *plat,
+				   struct device_node *np)
+{
+	struct device_node *i2c_group, *child;
+	unsigned int i;
+	u32 i2c_nr;
+	int err;
+
+	i2c_group = of_get_child_by_name(np, "gpio-i2c");
+	if (!i2c_group)
+		return 0;
+
+	i2c_nr = of_get_child_count(i2c_group);
+	plat->gpio_i2c = devm_kzalloc(dev, sizeof(*plat->gpio_i2c) * i2c_nr,
+				      GFP_KERNEL);
+	if (!plat->gpio_i2c)
+		return -ENOMEM;
+
+	plat->gpio_i2c_nr = i2c_nr;
+	i = 0;
+	for_each_child_of_node(i2c_group, child) {
+		u32 bus;
+
+		if (sscanf(child->full_name, "i2c@%u", &bus) != 1) {
+			dev_warn(dev, "Unknown address %s\n", child->name);
+			continue;
+		}
+
+		err = 0;
+		plat->gpio_i2c[i].bus_num = bus;
+		err += read_i2c_prop(dev, child, "sda", &plat->gpio_i2c[i].pin_sda);
+		err += read_i2c_prop(dev, child, "scl", &plat->gpio_i2c[i].pin_scl);
+		err += read_i2c_prop(dev, child, "delay", &plat->gpio_i2c[i].udelay);
+		err += read_i2c_prop(dev, child, "timeout", &plat->gpio_i2c[i].timeout);
+		if (err == 0)
+			i++;
+	}
+
+	return 0;
+}
+
+/* Read device functions */
+static u32 sm501_read_devices(struct device *dev, struct device_node *np)
+{
+	static const char * const funcname[] = {
+		"usb-host", "usb-slave", "ssp0", "ssp1",
+		"uart0", "uart1", "fbaccel", "ac97",
+		"i2s", "gpio",
+	};
+	struct property *prop;
+	unsigned int i;
+	const char *s;
+	u32 ret = 0;
+
+	of_property_for_each_string(np, "smi,devices", prop, s) {
+		for (i = 0; i < ARRAY_SIZE(funcname); i++) {
+			if (strcmp(s, funcname[i]) == 0) {
+				ret |= 1 << i;
+				goto next;
+			}
+		}
+		dev_warn(dev, "Unknown device function '%s'", s);
+next:
+	}
+	if (!ret)
+		dev_warn(dev, "devices not defined. disable all functions.");
+	return ret;
+}
+
+/* Build platform_data from OF property */
+struct plat_dt {
+	struct sm501_platdata plat;
+	struct sm501_initdata init;
+};
+
+static int sm501_parse_dt(struct sm501_devdata *sm, struct device_node *np)
+{
+	struct sm501_platdata *plat;
+	struct plat_dt *dt_p;
+	u32 word;
+	int ret;
+
+	dt_p = devm_kzalloc(sm->dev, sizeof(*dt_p), GFP_KERNEL);
+	if (!dt_p)
+		return -ENOMEM;
+
+	plat = &dt_p->plat;
+	plat->init = &dt_p->init;
+
+	plat->init->devices = sm501_read_devices(sm->dev, np);
+	/* mclk and m1xclk are not u32, so convert between them using intermediate variables. */
+	of_property_read_u32(np, "smi,mclk", &word);
+	plat->init->mclk = word;
+	of_property_read_u32(np, "smi,m1xclk", &word);
+	plat->init->m1xclk = word;
+
+	sm501_of_read_config(sm->dev, np, "misc-timing",
+			     misc_timing, misc_timing_flag,
+			     &plat->init->misc_timing);
+	sm501_of_read_config(sm->dev, np, "misc-control",
+			     misc_control, misc_control_flag,
+			     &plat->init->misc_control);
+	sm501_of_read_gpio(sm->dev, np,
+			   &plat->init->gpio_high, &plat->init->gpio_low);
+
+	if (IS_ENABLED(CONFIG_MFD_SM501_GPIO) &&
+	    (plat->init->devices & SM501_USE_GPIO)) {
+		ret = sm501_parse_dt_gpio_i2c(sm->dev, plat, np);
+		if (ret)
+			return ret;
+	}
+	sm->platdata = plat;
+	return 0;
+}
+
 static int sm501_plat_probe(struct platform_device *dev)
 {
 	struct sm501_devdata *sm;
@@ -1406,6 +1715,12 @@ static int sm501_plat_probe(struct platform_device *dev)
 		goto err_res;
 	}
 
+	if (IS_ENABLED(CONFIG_OF) && dev->dev.of_node) {
+		ret = sm501_parse_dt(sm, dev->dev.of_node);
+		if (ret)
+			goto err_res;
+	}
+
 	platform_set_drvdata(dev, sm);
 
 	sm->regs = ioremap(sm->io_res->start, resource_size(sm->io_res));
diff --git a/drivers/video/fbdev/sm501fb.c b/drivers/video/fbdev/sm501fb.c
index d6fdc1737cd2..5de00f2570aa 100644
--- a/drivers/video/fbdev/sm501fb.c
+++ b/drivers/video/fbdev/sm501fb.c
@@ -1932,6 +1932,106 @@ static int sm501fb_start_one(struct sm501fb_info *info,
 	return 0;
 }
 
+#if defined(CONFIG_OF)
+static u32 read_display_flags(struct device_node *np)
+{
+	static const char * const name[] = {
+		"use-init-done", "disable-at-exit", "use-hwcursor", "use-hwaccel",
+		"panel-no-fpen", "panel-no-vbiasen", "panel-inv-fpen", "panel-inv-vbiasen",
+	};
+
+	struct property *prop;
+	unsigned int i;
+	const char *s;
+	u32 ret = 0;
+
+	of_property_for_each_string(np, "smi,flags", prop, s) {
+		for (i = 0; i < ARRAY_SIZE(name); i++) {
+			if (strcmp(s, name[i]) == 0) {
+				ret |= 1 << i;
+				break;
+			}
+		}
+	}
+	return ret;
+}
+
+/* parse CRT / panel configuration */
+static struct sm501_platdata_fbsub *dt_fbsub(struct device *dev,
+					     struct device_node *np,
+					     const char *name)
+{
+	struct sm501_platdata_fbsub *fbsub = NULL;
+	struct fb_videomode *def_mode = NULL;
+	struct device_node *child;
+	const void *p_edid;
+	u32 flags = 0;
+	u32 bpp = 0;
+	int len;
+
+	child = of_get_child_by_name(np, name);
+	if (child == NULL)
+		return NULL;
+
+	p_edid = of_get_property(child, "edid", &len);
+	if (p_edid && len == EDID_LENGTH) {
+		struct fb_monspecs *specs;
+		u8 *edid;
+
+		edid = kmemdup(p_edid, EDID_LENGTH, GFP_KERNEL);
+		if (edid) {
+			specs = kzalloc(sizeof(*specs), GFP_KERNEL);
+			if (specs) {
+				fb_edid_to_monspecs(edid, specs);
+				def_mode = specs->modedb;
+			}
+		}
+		kfree(edid);
+	}
+
+	of_property_read_u32(child, "bpp", &bpp);
+
+	/* If flags property is obtained, fbsub is returned. */
+	flags = read_display_flags(child);
+	if (flags) {
+		fbsub = devm_kzalloc(dev, sizeof(*fbsub), GFP_KERNEL);
+		if (fbsub) {
+			fbsub->def_mode = def_mode;
+			fbsub->def_bpp = bpp;
+			fbsub->flags = flags;
+		}
+	}
+	return fbsub;
+}
+
+/* Build platform_data from OF property */
+static struct sm501_platdata_fb *pdata_from_dt(struct device *dev, struct device_node *np)
+{
+	enum sm501_fb_routing fb_route = SM501_FB_OWN;
+	struct sm501_platdata_fb *pdata = NULL;
+	struct sm501_platdata_fbsub *fb_crt;
+	struct sm501_platdata_fbsub *fb_pnl;
+	unsigned int flags = 0;
+
+	if (of_property_read_bool(np, "route-crt-panel"))
+		fb_route = SM501_FB_CRT_PANEL;
+	if (of_property_read_bool(np, "swap-fb-endian"))
+		flags = SM501_FBPD_SWAP_FB_ENDIAN;
+	fb_crt = dt_fbsub(dev, np, "crt");
+	fb_pnl = dt_fbsub(dev, np, "panel");
+	if (fb_crt || fb_pnl) {
+		pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+		if (pdata) {
+			pdata->fb_route = fb_route;
+			pdata->flags = flags;
+			pdata->fb_crt = fb_crt;
+			pdata->fb_pnl = fb_pnl;
+		}
+	}
+	return pdata;
+}
+#endif
+
 static int sm501fb_probe(struct platform_device *pdev)
 {
 	struct sm501fb_info *info;
@@ -1974,6 +2074,12 @@ static int sm501fb_probe(struct platform_device *pdev)
 				if (info->edid_data)
 					found = 1;
 			}
+			/* Get platform data compatible configuration */
+			if (!found) {
+				info->pdata = pdata_from_dt(dev, np);
+				if (info->pdata)
+					found = 1;
+			}
 		}
 #endif
 		if (!found) {
-- 
2.39.2




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux