Re: [PATCH v2 4/8] drm/i2c: tda998x: prepare for video input configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed Aug 14 12:43:29 PDT 2013, Sebastian Hesselbarth wrote:
> From: Russell King <rmk+kernel at arm.linux.org.uk>
> 
> The video-input-port (VIP) is highly configurable. This prepares
> current driver to allow to configure VIP configuration, as some
> boards connect lcd controller and TDA998x "pin-swapped" and depend
> on VIP to swap the pins by register configuration.
> 
> Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
> Tested-by: Darren Etheridge <detheridge at ti.com>
> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
	[snip]

AFAIK, the TI boards have no "pin-swapped", nor has the Cubox (there is
no need to set the bit CFG_GRA_SWAPRB of the register LCD_SPU_DMA_CTRL0
of the Dove lcd for RGB or YUV formats).

Which board needs a special VIP configuration?

-- 
Ken ar c'hentañ	|	      ** Breizh ha Linux atav! **
Jef		|		http://moinejf.free.fr/
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux