Re: [PATCH] mediatek: dsi: Add dsi per-frame lp code for mt8188

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Il 14/03/24 10:41, Shuijing Li ha scritto:
Adding the per-frame lp function of mt8188, which can keep HFP in HS and
reduce the time required for each line to enter and exit low power.
Per Frame LP:
   |<----------One Active Frame-------->|
--______________________________________----___________________
   ^HSA+HBP^^RGB^^HFP^^HSA+HBP^^RGB^^HFP^    ^HSA+HBP^^RGB^^HFP^

Per Line LP:
   |<---------------One Active Frame----------->|
--______________--______________--______________----______________
   ^HSA+HBP^^RGB^  ^HSA+HBP^^RGB^  ^HSA+HBP^^RGB^    ^HSA+HBP^^RGB^

Signed-off-by: Shuijing Li <shuijing.li@xxxxxxxxxxxx>
---
  drivers/gpu/drm/mediatek/mtk_dsi.c | 100 +++++++++++++++++++++++++++++
  1 file changed, 100 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index a2fdfc8ddb15..e6f4807c8711 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -83,6 +83,7 @@
  #define DSI_HSA_WC		0x50
  #define DSI_HBP_WC		0x54
  #define DSI_HFP_WC		0x58
+#define DSI_BLLP_WC		0x5C
#define DSI_CMDQ_SIZE 0x60
  #define CMDQ_SIZE			0x3f
@@ -180,6 +181,7 @@ struct mtk_dsi_driver_data {
  	bool has_shadow_ctl;
  	bool has_size_ctl;
  	bool cmdq_long_packet_ctl;
+	bool support_per_frame_lp;
  };
struct mtk_dsi {
@@ -516,6 +518,103 @@ static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi)
  			(vm->hactive * dsi_tmp_buf_bpp + 2) % dsi->lanes;
  	}
+ if (dsi->driver_data->support_per_frame_lp) {

This really looks like a good candidate to fit in a function on its own...

+		unsigned int lpx = 0, da_hs_exit = 0, da_hs_prep = 0, da_hs_trail = 0;
+		unsigned int da_hs_zero = 0, ps_wc = 0, hs_vb_ps_wc = 0;
+		u32 bllp_wc, bllp_en, v_active_roundup, hstx_cklp_wc;
+		u32 hstx_cklp_wc_max, hstx_cklp_wc_min;
+
+		da_hs_trail = (readl(dsi->regs + DSI_PHY_TIMECON0) >> 24) & 0xff;
+		bllp_en = (readl(dsi->regs + DSI_TXRX_CTRL) >> 7) & 0x1;

(somewhere: #define HSTX_BLLP_EN BIT(7))

u32 timecon0, txrx_ctrl;

timecon0 = readl(....DSI_PHY_TIMECON0);
txrx_ctrl = readl(.....);

da_hs_trail = FIELD_GET(HS_TRAIL, timecon0);
bllp_en = FIELD_GET(HSTX_BLLP_EN, txrx_ctrl);

+		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) {
+			horizontal_sync_active_byte =
+				(vm->hsync_len * dsi_tmp_buf_bpp - 10);
+			horizontal_backporch_byte =
+				(vm->hback_porch * dsi_tmp_buf_bpp - 10);
+			horizontal_frontporch_byte =
+				(vm->hfront_porch * dsi_tmp_buf_bpp - 12);
+
+			ps_wc = readl(dsi->regs + DSI_PSCTRL) & 0x7fff;
+			v_active_roundup = (32 + horizontal_sync_active_byte +
+				horizontal_backporch_byte + ps_wc +
+				horizontal_frontporch_byte) % dsi->lanes;
+			if (v_active_roundup)
+				horizontal_backporch_byte = horizontal_backporch_byte +
+					dsi->lanes - v_active_roundup;
+			hstx_cklp_wc_min = (DIV_ROUND_UP((12 + 2 + 4 +

Please document those "magic numbers": why is this 12 + 2 + 4 ?
What is 12? what is 2? what is 4?

+				horizontal_sync_active_byte), dsi->lanes) + da_hs_trail + 1)
+				* dsi->lanes / 6 - 1;
+			hstx_cklp_wc_max = (DIV_ROUND_UP((20 + 6 + 4 +
+				horizontal_sync_active_byte + horizontal_backporch_byte +
+				ps_wc), dsi->lanes) + da_hs_trail + 1) * dsi->lanes / 6 - 1;
+		} else {
+			horizontal_sync_active_byte = vm->hsync_len * dsi_tmp_buf_bpp - 4;
+
+			horizontal_backporch_byte = (vm->hback_porch + vm->hsync_len) *
+				dsi_tmp_buf_bpp - 10;
+			hstx_cklp_wc_min = (DIV_ROUND_UP(4, dsi->lanes) + da_hs_trail + 1)
+				* dsi->lanes / 6 - 1;
+
+			if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) {
+				ps_wc = readl(dsi->regs + DSI_PSCTRL) & 0x7fff;
+				bllp_wc = readl(dsi->regs + DSI_BLLP_WC) & 0xfff;

Please use bitfield macros here as well.

+				horizontal_frontporch_byte = (vm->hfront_porch *
+					dsi_tmp_buf_bpp - 18);
+
+				v_active_roundup = (28 + horizontal_backporch_byte + ps_wc +
+					horizontal_frontporch_byte + bllp_wc) % dsi->lanes;
+				if (v_active_roundup)
+					horizontal_backporch_byte = horizontal_backporch_byte +
+					dsi->lanes - v_active_roundup;
+				if (bllp_en) {
+					hstx_cklp_wc_max = (DIV_ROUND_UP((16 + 6 + 4 +
+						horizontal_backporch_byte + bllp_wc + ps_wc),
+						dsi->lanes) + da_hs_trail + 1) * dsi->lanes / 6 - 1;
+				} else {
+					hstx_cklp_wc_max = (DIV_ROUND_UP((12 + 4 + 4 +
+						horizontal_backporch_byte + bllp_wc + ps_wc),
+						dsi->lanes) + da_hs_trail + 1) * dsi->lanes / 6 - 1;
+				}
+			} else {
+				ps_wc = readl(dsi->regs + DSI_PSCTRL) & 0x7fff;
+				horizontal_frontporch_byte = (vm->hfront_porch *
+					dsi_tmp_buf_bpp - 12);
+
+				v_active_roundup = (22 + horizontal_backporch_byte + ps_wc +
+					horizontal_frontporch_byte) % dsi->lanes;
+				if (v_active_roundup)
+					horizontal_backporch_byte = horizontal_backporch_byte +
+					dsi->lanes - v_active_roundup;
+
+				hstx_cklp_wc_max = (DIV_ROUND_UP((12 + 4 + 4 +
+					horizontal_backporch_byte + ps_wc),
+					dsi->lanes) + da_hs_trail + 1) * dsi->lanes / 6 - 1;
+			}
+		}
+		hstx_cklp_wc = (readl(dsi->regs + DSI_HSTX_CKL_WC) >> 2) & 0x3fff;

same here

+		if (hstx_cklp_wc <= hstx_cklp_wc_min ||
+			hstx_cklp_wc >= hstx_cklp_wc_max) {
+			hstx_cklp_wc = (hstx_cklp_wc_max / 2) << 2;

and same here... and everywhere else.

+			writel(hstx_cklp_wc, dsi->regs + DSI_HSTX_CKL_WC);
+		}
+		hstx_cklp_wc = hstx_cklp_wc >> 2;
+		if (hstx_cklp_wc <= hstx_cklp_wc_min ||
+			hstx_cklp_wc >= hstx_cklp_wc_max) {
+			DRM_WARN("Wrong setting of hstx_ckl_wc\n");
+		}
+
+		lpx = readl(dsi->regs + DSI_PHY_TIMECON0) & 0xff;
+		da_hs_exit = (readl(dsi->regs + DSI_PHY_TIMECON1) >> 24) & 0xff;
+		da_hs_prep = (readl(dsi->regs + DSI_PHY_TIMECON0) >> 8) & 0xff;
+		da_hs_zero = (readl(dsi->regs + DSI_PHY_TIMECON0) >> 16) & 0xff;
+		ps_wc = readl(dsi->regs + DSI_PSCTRL) & 0x7fff;
+		hs_vb_ps_wc = ps_wc -
+			(lpx + da_hs_exit + da_hs_prep + da_hs_zero + 2)
+			* dsi->lanes;
+		horizontal_frontporch_byte = (1 << 31)
+			| (hs_vb_ps_wc << 16)
+			| (horizontal_frontporch_byte);
+	}
  	writel(horizontal_sync_active_byte, dsi->regs + DSI_HSA_WC);
  	writel(horizontal_backporch_byte, dsi->regs + DSI_HBP_WC);
  	writel(horizontal_frontporch_byte, dsi->regs + DSI_HFP_WC);
@@ -1246,6 +1345,7 @@ static const struct mtk_dsi_driver_data mt8188_dsi_driver_data = {
  	.has_shadow_ctl = true,
  	.has_size_ctl = true,
  	.cmdq_long_packet_ctl = true,
+	.support_per_frame_lp = true,

Is this supported only on MT8188? Are you sure that MT8195 doesn't support that?

Regards,
Angelo

  };
static const struct of_device_id mtk_dsi_of_match[] = {





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux