From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
This patch adds tda998x specific parameters to allow it to be configured
for different boards using it. Also, this implements rudimentary audio
support for S/PDIF attached controllers.
Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Tested-by: Darren Etheridge <detheridge@xxxxxx>
---
Changelog:
for v1:
- set AUDIO_DIV to SERCLK/16 for modes with pixclk >100MHz
- also calculate CTS
v1->v2:
- Remove CTS calculation as it isn't used in current TDA998x setup
(Reported by Russell King)
- Remove debug left-over (Reported by Russell King)
- Use correct tda998x include (Reported by Russell King)
Cc: David Airlie <airlied@xxxxxxxx>
Cc: Darren Etheridge <detheridge@xxxxxx>
Cc: Rob Clark <robdclark@xxxxxxxxx>
Cc: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
---
drivers/gpu/drm/i2c/tda998x_drv.c | 268 +++++++++++++++++++++++++++++++++++--
include/drm/i2c/tda998x.h | 30 +++++
2 files changed, 290 insertions(+), 8 deletions(-)
create mode 100644 include/drm/i2c/tda998x.h
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 527d11b..2b64dfa 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -23,7 +23,7 @@
#include <drm/drm_crtc_helper.h>
#include <drm/drm_encoder_slave.h>
#include <drm/drm_edid.h>
-
+#include <drm/i2c/tda998x.h>
#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
@@ -32,9 +32,11 @@ struct tda998x_priv {
uint16_t rev;
uint8_t current_page;
int dpms;
+ bool is_hdmi_sink;
u8 vip_cntrl_0;
u8 vip_cntrl_1;
u8 vip_cntrl_2;
+ struct tda998x_encoder_params params;
};
#define to_tda998x_priv(x) ((struct tda998x_priv *)to_encoder_slave(x)->slave_priv)
@@ -71,10 +73,13 @@ struct tda998x_priv {
# define I2C_MASTER_DIS_MM (1 << 0)
# define I2C_MASTER_DIS_FILT (1 << 1)
# define I2C_MASTER_APP_STRT_LAT (1 << 2)
+#define REG_FEAT_POWERDOWN REG(0x00, 0x0e) /* read/write */
+# define FEAT_POWERDOWN_SPDIF (1 << 3)
#define REG_INT_FLAGS_0 REG(0x00, 0x0f) /* read/write */
#define REG_INT_FLAGS_1 REG(0x00, 0x10) /* read/write */
#define REG_INT_FLAGS_2 REG(0x00, 0x11) /* read/write */
# define INT_FLAGS_2_EDID_BLK_RD (1 << 1)
+#define REG_ENA_ACLK REG(0x00, 0x16) /* read/write */
#define REG_ENA_VP_0 REG(0x00, 0x18) /* read/write */
#define REG_ENA_VP_1 REG(0x00, 0x19) /* read/write */
#define REG_ENA_VP_2 REG(0x00, 0x1a) /* read/write */
@@ -113,6 +118,7 @@ struct tda998x_priv {
#define REG_VIP_CNTRL_5 REG(0x00, 0x25) /* write */
# define VIP_CNTRL_5_CKCASE (1 << 0)
# define VIP_CNTRL_5_SP_CNT(x) (((x) & 3) << 1)
+#define REG_MUX_AP REG(0x00, 0x26) /* read/write */
#define REG_MUX_VP_VIP_OUT REG(0x00, 0x27) /* read/write */
#define REG_MAT_CONTRL REG(0x00, 0x80) /* write */
# define MAT_CONTRL_MAT_SC(x) (((x) & 3) << 0)
@@ -175,6 +181,12 @@ struct tda998x_priv {
# define HVF_CNTRL_1_PAD(x) (((x) & 3) << 4)
# define HVF_CNTRL_1_SEMI_PLANAR (1 << 6)
#define REG_RPT_CNTRL REG(0x00, 0xf0) /* write */
+#define REG_I2S_FORMAT REG(0x00, 0xfc) /* read/write */
+# define I2S_FORMAT(x) (((x) & 3) << 0)
+#define REG_AIP_CLKSEL REG(0x00, 0xfd) /* write */
+# define AIP_CLKSEL_FS(x) (((x) & 3) << 0)
+# define AIP_CLKSEL_CLK_POL(x) (((x) & 1) << 2)
+# define AIP_CLKSEL_AIP(x) (((x) & 7) << 3)
/* Page 02h: PLL settings */
@@ -198,6 +210,12 @@ struct tda998x_priv {
#define REG_PLL_SCGR1 REG(0x02, 0x09) /* read/write */
#define REG_PLL_SCGR2 REG(0x02, 0x0a) /* read/write */
#define REG_AUDIO_DIV REG(0x02, 0x0e) /* read/write */
+# define AUDIO_DIV_SERCLK_1 0
+# define AUDIO_DIV_SERCLK_2 1
+# define AUDIO_DIV_SERCLK_4 2
+# define AUDIO_DIV_SERCLK_8 3
+# define AUDIO_DIV_SERCLK_16 4
+# define AUDIO_DIV_SERCLK_32 5
#define REG_SEL_CLK REG(0x02, 0x11) /* read/write */
# define SEL_CLK_SEL_CLK1 (1 << 0)
# define SEL_CLK_SEL_VRF_CLK(x) (((x) & 3) << 1)
@@ -216,6 +234,11 @@ struct tda998x_priv {
/* Page 10h: information frames and packets */
+#define REG_IF1_HB0 REG(0x10, 0x20) /* read/write */
+#define REG_IF2_HB0 REG(0x10, 0x40) /* read/write */
+#define REG_IF3_HB0 REG(0x10, 0x60) /* read/write */
+#define REG_IF4_HB0 REG(0x10, 0x80) /* read/write */
+#define REG_IF5_HB0 REG(0x10, 0xa0) /* read/write */
/* Page 11h: audio settings and content info packets */
@@ -225,10 +248,33 @@ struct tda998x_priv {
# define AIP_CNTRL_0_LAYOUT (1 << 2)
# define AIP_CNTRL_0_ACR_MAN (1 << 5)
# define AIP_CNTRL_0_RST_CTS (1 << 6)
+#define REG_CA_I2S REG(0x11, 0x01) /* read/write */
+# define CA_I2S_CA_I2S(x) (((x) & 31) << 0)
+# define CA_I2S_HBR_CHSTAT (1 << 6)
+#define REG_LATENCY_RD REG(0x11, 0x04) /* read/write */
+#define REG_ACR_CTS_0 REG(0x11, 0x05) /* read/write */
+#define REG_ACR_CTS_1 REG(0x11, 0x06) /* read/write */
+#define REG_ACR_CTS_2 REG(0x11, 0x07) /* read/write */
+#define REG_ACR_N_0 REG(0x11, 0x08) /* read/write */
+#define REG_ACR_N_1 REG(0x11, 0x09) /* read/write */
+#define REG_ACR_N_2 REG(0x11, 0x0a) /* read/write */
+#define REG_CTS_N REG(0x11, 0x0c) /* read/write */
+# define CTS_N_K(x) (((x) & 7) << 0)
+# define CTS_N_M(x) (((x) & 3) << 4)
#define REG_ENC_CNTRL REG(0x11, 0x0d) /* read/write */
# define ENC_CNTRL_RST_ENC (1 << 0)
# define ENC_CNTRL_RST_SEL (1 << 1)
# define ENC_CNTRL_CTL_CODE(x) (((x) & 3) << 2)
+#define REG_DIP_FLAGS REG(0x11, 0x0e) /* read/write */
+# define DIP_FLAGS_ACR (1 << 0)
+# define DIP_FLAGS_GC (1 << 1)
+#define REG_DIP_IF_FLAGS REG(0x11, 0x0f) /* read/write */
+# define DIP_IF_FLAGS_IF1 (1 << 1)
+# define DIP_IF_FLAGS_IF2 (1 << 2)
+# define DIP_IF_FLAGS_IF3 (1 << 3)
+# define DIP_IF_FLAGS_IF4 (1 << 4)
+# define DIP_IF_FLAGS_IF5 (1 << 5)
+#define REG_CH_STAT_B(x) REG(0x11, 0x14 + (x)) /* read/write */
/* Page 12h: HDCP and OTP */
@@ -344,6 +390,23 @@ fail:
return ret;
}
+static void
+reg_write_range(struct drm_encoder *encoder, uint16_t reg, uint8_t *p, int cnt)
+{
+ struct i2c_client *client = drm_i2c_encoder_get_client(encoder);
+ uint8_t buf[cnt+1];
+ int ret;
+
+ buf[0] = REG2ADDR(reg);
+ memcpy(&buf[1], p, cnt);
+
+ set_page(encoder, reg);
+
+ ret = i2c_master_send(client, buf, cnt + 1);
+ if (ret < 0)
+ dev_err(&client->dev, "Error %d writing to 0x%x\n", ret, reg);
+}
+
static uint8_t
reg_read(struct drm_encoder *encoder, uint16_t reg)
{
@@ -412,7 +475,7 @@ tda998x_reset(struct drm_encoder *encoder)
reg_write(encoder, REG_SERIALIZER, 0x00);
reg_write(encoder, REG_BUFFER_OUT, 0x00);
reg_write(encoder, REG_PLL_SCG1, 0x00);
- reg_write(encoder, REG_AUDIO_DIV, 0x03);
+ reg_write(encoder, REG_AUDIO_DIV, AUDIO_DIV_SERCLK_8);
reg_write(encoder, REG_SEL_CLK, SEL_CLK_SEL_CLK1 | SEL_CLK_ENA_SC_CLK);
reg_write(encoder, REG_PLL_SCGN1, 0xfa);
reg_write(encoder, REG_PLL_SCGN2, 0x00);
@@ -424,11 +487,184 @@ tda998x_reset(struct drm_encoder *encoder)
reg_write(encoder, REG_MUX_VP_VIP_OUT, 0x24);
}
+static uint8_t tda998x_cksum(uint8_t *buf, size_t bytes)
+{
+ uint8_t sum = 0;
+
+ while (bytes--)
+ sum += *buf++;
+ return (255 - sum) + 1;
+}
+
+#define HB(x) (x)
+#define PB(x) (HB(2) + 1 + (x))
+
+static void
+tda998x_write_if(struct drm_encoder *encoder, uint8_t bit, uint16_t addr,
+ uint8_t *buf, size_t size)
+{
+ buf[PB(0)] = tda998x_cksum(buf, size);
+
+ reg_clear(encoder, REG_DIP_IF_FLAGS, bit);
+ reg_write_range(encoder, addr, buf, size);
+ reg_set(encoder, REG_DIP_IF_FLAGS, bit);
+}
+
+static void
+tda998x_write_aif(struct drm_encoder *encoder, struct tda998x_encoder_params *p)
+{
+ uint8_t buf[PB(5) + 1];
+
+ buf[HB(0)] = 0x84;
+ buf[HB(1)] = 0x01;
+ buf[HB(2)] = 10;
+ buf[PB(0)] = 0;
+ buf[PB(1)] = p->audio_frame[1] & 0x07; /* CC */
+ buf[PB(2)] = p->audio_frame[2] & 0x1c; /* SF */
+ buf[PB(4)] = p->audio_frame[4];
+ buf[PB(5)] = p->audio_frame[5] & 0xf8; /* DM_INH + LSV */
+
+ tda998x_write_if(encoder, DIP_IF_FLAGS_IF4, REG_IF4_HB0, buf,
+ sizeof(buf));
+}
+
+static void
+tda998x_write_avi(struct drm_encoder *encoder, struct drm_display_mode *mode)
+{
+ uint8_t buf[PB(13) + 1];
+
+ memset(buf, 0, sizeof(buf));
+ buf[HB(0)] = 0x82;
+ buf[HB(1)] = 0x02;
+ buf[HB(2)] = 13;
+ buf[PB(4)] = drm_match_cea_mode(mode);
+
+ tda998x_write_if(encoder, DIP_IF_FLAGS_IF2, REG_IF2_HB0, buf,
+ sizeof(buf));
+}
+
+static void tda998x_audio_mute(struct drm_encoder *encoder, bool on)
+{
+ if (on) {
+ reg_set(encoder, REG_SOFTRESET, SOFTRESET_AUDIO);
+ reg_clear(encoder, REG_SOFTRESET, SOFTRESET_AUDIO);
+ reg_set(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_FIFO);
+ } else {
+ reg_clear(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_FIFO);
+ }
+}
+
+static void
+tda998x_configure_audio(struct drm_encoder *encoder,
+ struct drm_display_mode *mode, struct tda998x_encoder_params *p)
+{
+ uint8_t buf[6], clksel_aip, clksel_fs, ca_i2s, cts_n, adiv;
+ uint32_t n;
+
+ /* Enable audio ports */
+ reg_write(encoder, REG_ENA_AP, p->audio_cfg);
+ reg_write(encoder, REG_ENA_ACLK, p->audio_clk_cfg);
+
+ /* Set audio input source */
+ switch (p->audio_format) {
+ case AFMT_SPDIF:
+ reg_write(encoder, REG_MUX_AP, 0x40);
+ clksel_aip = AIP_CLKSEL_AIP(0);
+ /* FS64SPDIF */
+ clksel_fs = AIP_CLKSEL_FS(2);
+ cts_n = CTS_N_M(3) | CTS_N_K(3);
+ ca_i2s = 0;
+ break;
+
+ case AFMT_I2S:
+ reg_write(encoder, REG_MUX_AP, 0x64);
+ clksel_aip = AIP_CLKSEL_AIP(1);
+ /* ACLK */
+ clksel_fs = AIP_CLKSEL_FS(0);
+ cts_n = CTS_N_M(3) | CTS_N_K(3);
+ ca_i2s = CA_I2S_CA_I2S(0);
+ break;
+ }
+
+ reg_write(encoder, REG_AIP_CLKSEL, clksel_aip);
+ reg_clear(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_LAYOUT);
+
+ /* Enable automatic CTS generation */
+ reg_clear(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_ACR_MAN);
+ reg_write(encoder, REG_CTS_N, cts_n);
+
+ /*
+ * Audio input somehow depends on HDMI line rate which is
+ * related to pixclk. Testing showed that modes with pixclk
+ * >100MHz need a larger divider while <40MHz need the default.
+ * There is no detailed info in the datasheet, so we just
+ * assume 100MHz requires larger divider.
+ */
+ if (mode->clock > 100000)
+ adiv = AUDIO_DIV_SERCLK_16;
+ else
+ adiv = AUDIO_DIV_SERCLK_8;
+ reg_write(encoder, REG_AUDIO_DIV, adiv);
+
+ /*
+ * This is the approximate value of N, which happens to be
+ * the recommended values for non-coherent clocks.
+ */
+ n = 128 * p->audio_sample_rate / 1000;
+
+ /* Write the CTS and N values */
+ buf[0] = 0x44;
+ buf[1] = 0x42;
+ buf[2] = 0x01;
+ buf[3] = n;
+ buf[4] = n >> 8;
+ buf[5] = n >> 16;
+ reg_write_range(encoder, REG_ACR_CTS_0, buf, 6);
+
+ /* Set CTS clock reference */
+ reg_write(encoder, REG_AIP_CLKSEL, clksel_aip | clksel_fs);
+
+ /* Reset CTS generator */
+ reg_set(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_CTS);
+ reg_clear(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_CTS);
+
+ /* Write the channel status */
+ buf[0] = 0x04;
+ buf[1] = 0x00;
+ buf[2] = 0x00;
+ buf[3] = 0xf1;
+ reg_write_range(encoder, REG_CH_STAT_B(0), buf, 4);
+
+ tda998x_audio_mute(encoder, true);
+ mdelay(20);
+ tda998x_audio_mute(encoder, false);
+
+ /* Write the audio information packet */
+ tda998x_write_aif(encoder, p);
+}
+
/* DRM encoder functions */
static void
tda998x_encoder_set_config(struct drm_encoder *encoder, void *params)
{
+ struct tda998x_priv *priv = to_tda998x_priv(encoder);
+ struct tda998x_encoder_params *p = params;
+
+ priv->vip_cntrl_0 = VIP_CNTRL_0_SWAP_A(p->swap_a) |
+ (p->mirr_a ? VIP_CNTRL_0_MIRR_A : 0) |
+ VIP_CNTRL_0_SWAP_B(p->swap_b) |
+ (p->mirr_b ? VIP_CNTRL_0_MIRR_B : 0);
+ priv->vip_cntrl_1 = VIP_CNTRL_1_SWAP_C(p->swap_c) |
+ (p->mirr_c ? VIP_CNTRL_1_MIRR_C : 0) |
+ VIP_CNTRL_1_SWAP_D(p->swap_d) |
+ (p->mirr_d ? VIP_CNTRL_1_MIRR_D : 0);
+ priv->vip_cntrl_2 = VIP_CNTRL_2_SWAP_E(p->swap_e) |
+ (p->mirr_e ? VIP_CNTRL_2_MIRR_E : 0) |
+ VIP_CNTRL_2_SWAP_F(p->swap_f) |
+ (p->mirr_f ? VIP_CNTRL_2_MIRR_F : 0);
+
+ priv->params = *p;
}
static void
@@ -445,8 +681,7 @@ tda998x_encoder_dpms(struct drm_encoder *encoder, int mode)
switch (mode) {
case DRM_MODE_DPMS_ON:
- /* enable audio and video ports */
- reg_write(encoder, REG_ENA_AP, 0xff);
+ /* enable video ports, audio will be enabled later */
reg_write(encoder, REG_ENA_VP_0, 0xff);
reg_write(encoder, REG_ENA_VP_1, 0xff);
reg_write(encoder, REG_ENA_VP_2, 0xff);
@@ -608,17 +843,32 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
reg_write16(encoder, REG_REFPIX_MSB, ref_pix);
reg_write16(encoder, REG_REFLINE_MSB, ref_line);
- reg = TBG_CNTRL_1_VHX_EXT_DE |
- TBG_CNTRL_1_VHX_EXT_HS |
- TBG_CNTRL_1_VHX_EXT_VS |
- TBG_CNTRL_1_DWIN_DIS | /* HDCP off */
+ reg = TBG_CNTRL_1_DWIN_DIS | /* HDCP off */
TBG_CNTRL_1_VH_TGL_2;
+ /*
+ * It is questionable whether this is correct - the nxp driver
+ * does not set VH_TGL_2 and the below for all display modes.
+ */
if (mode->flags & (DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC))
reg |= TBG_CNTRL_1_VH_TGL_0;
reg_set(encoder, REG_TBG_CNTRL_1, reg);
/* must be last register set: */
reg_clear(encoder, REG_TBG_CNTRL_0, TBG_CNTRL_0_SYNC_ONCE);
+
+ /* Only setup the info frames if the sink is HDMI */
+ if (priv->is_hdmi_sink) {
+ /* We need to turn HDMI HDCP stuff on to get audio through */
+ reg_clear(encoder, REG_TBG_CNTRL_1, TBG_CNTRL_1_DWIN_DIS);
+ reg_write(encoder, REG_ENC_CNTRL, ENC_CNTRL_CTL_CODE(1));
+ reg_set(encoder, REG_TX33, TX33_HDMI);
+
+ tda998x_write_avi(encoder, adjusted_mode);
+
+ if (priv->params.audio_cfg)
+ tda998x_configure_audio(encoder, adjusted_mode,
+ &priv->params);
+ }
}
static enum drm_connector_status
@@ -744,12 +994,14 @@ static int
tda998x_encoder_get_modes(struct drm_encoder *encoder,
struct drm_connector *connector)
{
+ struct tda998x_priv *priv = to_tda998x_priv(encoder);
struct edid *edid = (struct edid *)do_get_edid(encoder);
int n = 0;
if (edid) {
drm_mode_connector_update_edid_property(connector, edid);
n = drm_add_edid_modes(connector, edid);
+ priv->is_hdmi_sink = drm_detect_hdmi_monitor(edid);
kfree(edid);
}
diff --git a/include/drm/i2c/tda998x.h b/include/drm/i2c/tda998x.h
new file mode 100644
index 0000000..3e419d9
--- /dev/null
+++ b/include/drm/i2c/tda998x.h
@@ -0,0 +1,30 @@
+#ifndef __DRM_I2C_TDA998X_H__
+#define __DRM_I2C_TDA998X_H__
+
+struct tda998x_encoder_params {
+ u8 swap_b:3;
+ u8 mirr_b:1;
+ u8 swap_a:3;
+ u8 mirr_a:1;
+ u8 swap_d:3;
+ u8 mirr_d:1;
+ u8 swap_c:3;
+ u8 mirr_c:1;
+ u8 swap_f:3;
+ u8 mirr_f:1;
+ u8 swap_e:3;
+ u8 mirr_e:1;
+
+ u8 audio_cfg;
+ u8 audio_clk_cfg;
+ u8 audio_frame[6];
+
+ enum {
+ AFMT_SPDIF,
+ AFMT_I2S
+ } audio_format;
+
+ unsigned audio_sample_rate;
+};
+
+#endif
--
1.7.10.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
